There are plans to develop a sonar system, but it will likely be sometime next year or later due to the significant development challenges.

Are there any plans to integrate sonar into this system? i currently have a ship set up with your ciws and missiles which works perfectly for air and surface targets but i have no way of detecting or engaging underwater threats.

If the FCS Type 6 occasionally loses track of the target, increasing the value of the “Detection Interval [tick]” setting for the FCS Type 6 may improve the situation.

sorry MumenR,i didnt see, now im working for adapt your system for fighters, i added autoaltitud,and auto stabilized mode in your map,works perfect, i tested the system with 3 radars ,and works perfect with three basic, with three phalanx a sometimes lose the tgt,thanks from spain

Thank you for the compliment!
Regarding the space bar not working, the space bar controls are only for the FCS Type 6. Therefore, it won't function unless connected to the FCS Type 6.
Upon checking the workshop unit, I discovered that the independent HMD unit on the left also had operation instructions written on its space bar, but this is incorrect.

hello MumenR ,firs of all, many thanks for your system, is very advanced,im using from the hmd2 version, and im very happy using on my creations, for example the b2,eurofighter the f22 raptor,thanks for the new version, when ii upload one of my creations ill coment you,,,(i found a small issue,the space key do not work,i tried to search the issue,but your code is very hard for me)

alright i will see

I think Basic Radar could be used as a substitute if the scan speed was slowed down, but I think Phalanx Radar would operate more stably.

Do i need to use the phalanx radars btw?

I see
i shall update based on experimentation
thanks!

The SM Type 3 installed in the VLS can also be fired sideways. However, the SM Type 3 included with the HMD V4 may not be the latest version, so we recommend downloading the latest version from the link below.

https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=3550256761

About VLS Mk.10
Information from VLS to missile:
num
1~6: ELI coordinate information
7: Mode (Freely configurable based on weapon type)
31: Radio Frequency
bool
1: ELI Detection Active

Information from Missile to VLS:
num
32: Weapon Type Number

Following this format should enable the launch of any missile.

Also how would i go about making a custom missile for it if possible

Nice
Thereotically could I use the missile launch system aswell on the same plane

Of course! Just connect it to a Physics sensor placed near your seat.

Can i use it on a plane

While it is possible, it would be a fairly difficult challenge, so there are no plans to implement it at the moment.

can you add iff for the missiles themself ?

You can simply replace the HMD microcontroller as it is.
However, if the connected FCS or search radar does not support the SRD3 signal format, you’ll need to update them to compatible versions.
Currently, the products that can output SRD3 are FCS Type 6 and FCS Type 7.

if i want to upgrade from v3 to v4 witch microcontroller do i need to upddate ?

btw i love your work

You can place the radar anywhere, but the closer it is to the Physics sensor the better the accuracy.

Can all 4 radars be on the same stack?

Technically, any radar that can output SRD3 will do. It's not that difficult, so if you need it urgently, I recommend making it yourself.
I'll also make a simple airborne radar, the SR V4, sometime soon.

It's just difficult fitting everything into smaller aircraft, the microcontroller size is fine but it's the amount of external equipment that's difficult. Mainly I think its the Radars, having 4 small radars stacked on top of each other would probably work best for smaller vehicles.

If you don’t mind, could you tell me specifically which parts you’d like to be made a bit more compact?

Oh not a problem lol.

I think I accidentally deleted your comment. Sorry.

V5 should be much more compact, aint no way am I fitting this in any of my planes.

Just place the Physics Sensor on the same merge as the seat (ideally as close to the head as possible) and connect the node to the microcontroller!

How would I put the HMD in a plane?

SRD2 and SRD3 are not compatible. You can plug any of them into the terminals marked SRD1/2/3.

Btw, is SRD2 and SRD3 compatible?

That's a cool update.
I'm gonna have to update all my military vehicles with these brand new controllers.

Thank you for the cool stuff