订阅以下载
5-Axle AWD Container Truck

A five axle, all-wheel-driven truck, with the capability to load standard sized containers.

Price: $ 41'493.-

Containers can be loaded without the help of other equipment.

The truck features a medium engine, manual gearbox with 8 gears, reverse and low gear. Reverse camera and light, a distance warner and working side mirrors. An acoustic warning sounds to warn bystanders when the truck is backing up. Yellow caution lights and a heavy truck horn round this package up.

It features a dynamic steering system with the two front axles and the 5th axle steered. Steering angle depends on speed, so it drives fairly stable even at high speeds.

The cab contains a bed for overnight stays, a regulated heater, transponder locator and a variety of equipment like warm clothing, fire extinguishers, torches, cables, ropes and hoses.

The passanger seat has a plugin NFT interface, able to control NFT systems connected to the winch (e.g. Rescue Container, Fire Fighting Container, SAM Container, etc.)

Tha aft cab is equipted with a winch, which can be used for towing or recovery and contains the NFT link.

It's also equiped with a lane-hold functionality: Eases driving on train tracks due to their side walls. But keep an eye on speed and payload. Lane-hold tends to oscillate at high speeds or heavy payloads or both.

It's trailer connector supports SIBTaT standard.

1. Ignition ON
   
2. Start engine
   
3. Release Parking Brake (6) - Make sure blue "P" indicator is off.
   
4. Shift gear up (3) or down (2) as requiered
   
5. Throttle (W) or brake (S) accordingly

NOTE:
Engine Overheat Lamp (OVHT) may illuminate for short periods, indicating activation of cooling fan. If light stays on permanently, monitor engine temperature carefully!

1. Activate all connectors on container
   
2. Move Frame-Slider aft (left arrow)
   
3. Move Hook-Rack fully down (down arrow)
   
4. Activate upper frame connectors
   
5. Reverse straight towards container until connectors latch
   
6. Move Frame-Slider forward (right arrow)
   
7. Adjust Hook-Rack to load container onto truck.
   
8. When center of gravity of container is fully on the rack, position the rack horizontally, so the frame slider will connect to the cab when fully forward
   
9. Activate lower frame and aft rack connectors to fully secure container.

1. Start up and load cargo as requiered
   
2. Center truck on rail lanes and make sure walls left and right are high enough
   
3. Activate Lane-Hold and adjust vehicle speed, so no oscillation occurs.
   

   CAUTION!
   Take care in tight turns!

Container trailer:
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2894166196
Uses my Fuel Display:
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2841555616