Dont know

Is this still being updated?

can i reverse?

Auto-depth does not seem to work? When I engage Dive Plane Angle goes to 1 no matter what I input

it wont stop diving down to the sea floor how do i stop it ;-;

how do i use the autopilot? i cant seem to figure it out

What is the torepedo range

add the radio stuff

are the airlocks very slow or is it an issue for me?

Thank God

Hi All - That is it update to working status again. Below work carried out, with some left to do. Suggestions/feedback welcome.

Lifex 2024 update
New - Full new machinery plant to circumvent gas and space dlc issues
Fixed - Full new reactor with upgraded power output to 43k watts
Fixed - Ballast Tank filling and blowing
Fixed - Various alarms
Added - Compressor for recharging ballast tanks
Added - Emergency Back up battery room and compressor room *Back up battery selected from command centre, above reactor display.

To do - Add additional 4 x torpedo with addition of lower torpedo tubes
To do - Fix bilge pumps

I have been looking for a good and optimized submarine for months and this is the only one that meets all my needs.

Everyone - I am going to take a look over the next week at updating the reactor and ballast systems to get this working again. But yeah, currently, the space DLC and subsequent changes have killed it.

So it doesnt work anymore?

old submarines are broken because of updated

I cant dive the submarine, i already made everthing, Ballast whit 40.000, stab off, autodepht engaged. but it isnt working, please help.

very cool i like it a lot can you build the belgorod submarine aka the oscar 2-class sub

its 2 years old kirov just get a more updated submarine

for whatever reason this vessel doesn't even want to dive I've had my auto depth set it to the correct level my ballast is filling in and it still doesn't work.

Reactor not works ... only 43 C.... ;/

the reactor has an energy deficit
It lowers the rpm and the energy drops a lot to the point of completely turning off the sub. I would do it but I don't know how complex the system of nodes and pipes is because it's good, the summary is more well decorated and optimized. I was improving it but due to the problem of the reator and I can't continue
ps: maybe I thought I broke a system for the reator so I tested the original and the error is from the original
pd2: the sumarino does not submerge, I know it gives 17.0000ml
in the sub rafts
Please this summary is perfect for my project
pd3: the modified sub is for personal use, I will not upload it to the workshop

so i cant go underwater

ballasts arent filling

nevermind

is it supposed to go backwards

Operator_Madness - Yeah, the devs have broken the boilers for now. I believe that they may have patched it but not home until the weekend to implement.

Auto depth works fine, not sure what you're doing wrong there. Set depth and turn auto depth on, as long as she's full of ballast you're all good.

Also the auto depth is dumb. It reaches the set depth but doesnt level the sub and just keeps diving.

The reactor kinda doesn't work. I start it up, all goes fine, it heats up to around 300C, but when it says "boilers heating", the temperature of the core drops to around 250C. The boilers take a few minutes to heat up to 50C, after that I waited for 10 minutes and the temperature of the boilers increased only by 1 degree. Am I doing something wrong or the devs broke this with their updates?

Alright thank you

Nope, not worth it as would have to have a whole dockside crane infrastructure and you would need to spawn new torpedoes anyway...haven't seen any other subs really that have this ability either. Neat idea, just overly tricky to add in SW.

Oh so there isn’t away to load them without spawning a new boat?

You need to return to port and then respawn the boat. They'll appear back in place.

How do you reload the torpedoes and missiles after you run out?

150,000*

KT - Flood Tanks to at least 15000, then take the conn chair, ensure there is propulsion and that autodepth isn't on. Then if you are holding down w, the boat will start to submerge then classic ADWS to move around left right, up and down. Takes about 10-20 seconds to submerge.

to my knowledge you cant drive it

how tf i drive this it is driving on surface only not undervwater, not doing anything when holding w

100%. There is space for a compressor too if they bring that in.

once compressed gas is added, will you be adding it to the ballast tanks?

MAKE FULL BALLAST TANK FROM CONTROL ROOM. PITCH CONTROL FINS DOWN FROM CONTROL ROOM.

HOW GO DOWN

Sweet, thank you so much. This is by far one of the best submarines out there. Good work!

BaronVonShootz/Wargineer - Thanks for highlighting. I've fixed the problem and re-uploaded. It was an unmerged launch block and glitched old door.

I'll take a look.

@The_Wargineer
I've having the same exact issue

This may just be from my error but I can't seem to find what I am doing wrong if it is my fault. Whenever I try to fire the starboard torpedo it does not wan't to leave the tube, at first I thought it was because the first time I hadn't activated the pumps before starting the firing sequence. I tried again but this time I turned the pumps on, but to no avail. I can't seem to get it to fire, and I am having no problems with the port torpedo, it even fired the first time when I forgot to activate the pumps before opening the door and firing. Is this an issue anyone else is having and is it something I'm doing wrong or is it a problem with the sub?

strange, not sure why it was happening as the ballast was full

Yeah, it should be fairly stable, even when stopped, if the ballast tanks are full. I've never had any need to trim unless the forward bilge tank is full...

the back wants to float up, is there a way to trim?

JDMS77 - Once you've turned that screen on, click WP and start putting down waypoints. Once you're happy, click GO. Then there is a key button next to it to engage lateral autopilot...