订阅以下载
Schneider CA1

The Schneider CA 1 (originally named the Schneider CA) was the first French tank, developed during the First World War.
The Schneider was inspired by the need to overcome the stalemate of trench warfare which on the Western Front prevailed during most of the Great War. It was designed specifically to open passages for the infantry through barbed wire and then to suppress German machine gun nests. After a first concept by Jacques Quellennec devised in November 1914, the type was developed from May 1915 onwards by engineer Eugène Brillié, paralleling British development of tanks the same year. Colonel Jean Baptiste Eugène Estienne in December 1915 began to urge for the formation of French armoured units, leading to an order in February 1916 for four hundred Schneider CA tanks, which were manufactured by SOMUA, a subsidiary of Schneider located in a suburb of Paris, between September 1916 and August 1918.
-Wikipedia

This is a 1:1 of the Schneider CA1 to the best of my capabilities. There's no good intero photos so I went with what the tanks of that era would have.

Features:
-3 Operational Turrets with 2 of them with viewing ports
-A Driver's hatch that you can get in and out of.
-A semi Realistic start up.
-I3. The real one is an I4 but I could not fit that as it was quite tight.
-Very detailed out and inside.
-4 Seats including driver.

Start Up:
1. Go inside to the front and turn on power.
2. Go to the brake pressure system and put it to 80psi (there's a 5 psi gap so doesn't have to be bang on)
3. Got to the engine controller system and turn the key on and put the primer pressure up to 60psi (same buffer room)

Specs:
Speed- 8-9 KPH
Weight- 15.22 Tons (1522 Mass in game)

Wham mo you got her idling. Jump into the driver's seat and put the throttle lever (To the left) to 1 and turn the parking brake off.

Notes:
When in the driver's seat you can't get to the back due to the seat and gun stock so just use the seat next to it. If you want to reverse stop completely then reverse otherwise you will stall out. I know the turning circle is trash but it at 0 on one side when turning and putting 1 truck in reverse just stalls it out.

Credit:
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2416132817

Thanks for looking in and please do not reupload without my permission.
Made for the STW server link here:
https://discord.gg/FhVUPvv5