Stormworks: Build and Rescue

Stormworks: Build and Rescue

Ikke nok vurderinger
[UH1D] / Ground Power Unit \
   
Pris
Føj til foretrukne
Gjort til foretrukken
Fjern som foretrukken
Filstørrelse:
Offentliggjort:
442.839 KB
3. juni 2020 kl. 6:36
1 ændringsbemærkning ( vis )

Abonner for at downloade
[UH1D] / Ground Power Unit \

I 1 samling af mia.kiwi
[UH1D]
6 genstande
Beskrivelse
--- Ground Power Unit ---
The Ground Power Unit [GPU] is hand operated. It is equipped with twelve (12) generators to supply the UH-1D / SaR \ with electricity when it is needed.

--- Operating the GPU ---
(0) - Extend the Solar Panels
1 - Push the GPU where you need it
2 - Put on the brakes
3 - Flip the Engine Alimentation Switch
4 - Flip the Ground Power Supply Cable Alimentation Switch
5 - Flip the Attach Generators Output to Cable switch
6 - Extend the electric cable as much as needed
7 - Throttle up to 80
8 - Turn the Engine Starter key
9 - Kill the Starter when the engine is running
10 - Connect the electric connector to the Bird

--- Refueling the GPU --
1 - Bring the GPU near a diesel tank with Fluid Transfer Capabilities
2 - Put the brakes on
3 - Flip the Refueling Hose Alimentation Switch
4 - Extend the refueling hose and connect it to the diesel tank

!! The GPU only works with Diesel. Any other kind of fuel might damage the GPU.

--- Informations ---
The GPU produces 44.50 Watts that go directly into the main battery of the UH-1D / SaR \ when plugged in.
When unused, the GPU is fed by multiple cells of solar panels.
If the temperature of the Generators exceedes 116°C, an alarm will go off. To decrease the temperature you have to kill the GPU.
1 kommentarer
zaboxdd 6. nov. 2022 kl. 3:33 
cool