AdrielGH123, in the mod manager, did you position GTM Fixes above the 567? If not, then the headlights will be very messed up on the 567.

Can you fix the rear lights on the Peterbilt 567 because when driving at night the lights are green and the front lights are very bright, can you fix it?

@C.Simpson In Order to narrow this down .. You'll need you to remove all other mods so you have just the truck(s) only. Often various combinations of other mods can cause crashes if the mods use the same parts and/or names within the file structure. By removing these variables.. you can determine if it's the actual truck crashing or it's any supporting mods you had active when it crashed.

I am attempting to use the Peterbilt 567. I'm able to change the cab and chasis, however when I go to change the engine, it hangs, then crashes, I'll look at the log file to see what it says next time I try it

C. Simpson and the_intimidator2, are you guys using a Mac by any chance? I'm working on a fix for the trucks that affects some Mac users.

C. Simpson, take a look at the last few lines of your game.log.txt file. Start the game up, go straight to the dealership and get it to crash. Then look at the log file. There is usually a clue near the end unless it is an immediate crash. If it hangs for a few seconds, then a clue is usually there. Let me know what you find.

The mod keeps crashing my game anytime I go to change something in the dealership on either of the trucks advice?

Powersurge, yes I plan on updating the cabin accessories soon.

th3_intimidator2, can you provide a little more info such as which GTM trucks you are using and if you got them from Steam. Also, do you have GTM Fixes placed above the trucks? Do you have a lot of old outdated truck mods enabled? And what is taking place when the crash happens?

still crashs for me

Thanks for keeping these alive. They all seem to have had unofficial updates over the years released through somewhat dubious channels, but it's good to have a way to use them that only relies on the Workshop.

Do you have any plans to add support for the new cabin decorations that SCS has released in recent years? I have started putting together a mod for myself that adds them to the 567; if you're not planning to include them here, I could see myself extending that to the other GTM trucks and publishing it as a "companion" mod of sorts.

Nice these trucks have needed some love, its to bad GTM is so against releasing them for community development.

@GT182... Is that the original T610 mod from Steam ?

GT182, you're welcome. It would be better if I could get the truck mods turned over to me for further development, but at least this is the next best thing.

Thank you for getting this mod back out here Maurice.
I still have the original GTM mod. I used it as long as I could and didn't want to lose it so I kept it. I was hoping someone would get back up and working again.

Mack63740, quick load? I'm guessing you meant quick job. You're welcome.

I would like to thank you for the quick load fix.

Mac Studio display's don't have HDR support. Thanks.

Awesome! Thank you for this!

caldwell6, the gauges aren't blacked out, they are just so dark, you can't see them. Even your switches are dark. Any chance the new HDR feature could cause this?

Maurice. The image was emailed at approx. 6:28 EST. It may end up in your spam/junk folder as it's the first time I've emailed you. Thanks.

I am skipping right over V1.4 and have just released V1.5. V1.4 wasn't going to work out as it would require practically the entire truck mod to be in GTM Fixes. In short, I had some of the files included that I modified to remove some log file warning messages that referred to an obsolete wear attribute. This worked great but for some users, it ended up requiring all 4 trucks to be on your system. This is not practical So, I removed the files that were the source of the trouble. You will now see some warning messages in the game log. These can be ignored as they do no harm. It is just the game letting the mod author know of something that is now no longer used.

For those who have had crash issues, I apologize. The good thing is it should now be fixed. But, please report here good or bad your experience with V1.5. Thanks...

caldwell6, can you email me a good clear image of the blacked out gauges?
Send it to maurice@speedwaymail.net

Maurice. I do have version 1.3 and the guages are blacked out. No other issues with the graphics that I see. Thanks.

Hi Maurice. I forgot about the information in the mod. I haven't had time to test with just two trucks as it will take some time to obtain enough money/points to buy the 567 even with a mod I used. Thanks.

Awesome news! Thank you again. And Happy Thanksgiving!

Good news, I found what is causing this crash for some users. I'm working on the fix right now. It is quite involved to implement, but I'm sure I will have an update yet today. Happy Thanksgiving everyone.

Hopefully there's a way to solve it for users without all of the trucks. I really only want to use the 567 as it was my favorite GTM truck. I don't do quick jobs often, but from time to time it's nice to simply hop into a "company" truck and just go, without having to drive and pick up loads.

I'll see if I can't find that T610 in the meantime. Thank you. Appreciate the work you're doing to fix these old mods.

Edited: Corrected grammar for "your" to "you're". Give us an edit button Steam!

Sanguinem Luna, I'm going to see if I can get to the bottom of this. Another user has reported the same issue a few days ago. If having all the trucks is what it takes to fix the issue for you, go to Allmods and download the T610 there. Get the one that has V1.6.9. That one is known to work. Do a google search for "allmods T610" and you will find it. In the meantime, I'm doing some studying.

I did. I reproduced the crash several times and checked the log each time. Also checked the issue on a clean save that was never modded before, with only this mod and the 567 installed, and it still occurred. The T610, W900B, and T800 all were listed as the last several lines in the various logs.

I can, and did, solve the W900B and T800 crashes by downloading those trucks, but I don't know where to get the T610 since it isn't on the Workshop anymore.

Sanguinem Luna, can you check the last few lines of your game.log.txt file? It is known that there are some outdated truck mods that cause conflicts resulting in crashes. Without having to remove all your old truck mods, it might help if you put the GTM trucks above all other truck mods and truck accessory mods and GTM Fixes above the GTM trucks. I'm betting that one or more of your mods is doing something it shouldn't be doing. This positioning has helped others.

Good Job! Thank You!

I am also crashing when opening the quick jobs menu. Granted, I only have the 567 installed, but even if I grabbed the W900B and T800, I don't know where to get the T610 from.

nice work !! Thx !!

caldwell6, it's easy to find out if you have V1.3. Go to the mod manager and on the left side find GTM Fixes and click the "i" button. It will tell you which version it is along with some other info.
What was the result of running just the two mods on your Mac?

Hi Maurice. Steam shows the mod updated today. I unsubscribed, resubscribed and I'm still seeing the blacked out guages. Perhaps the update didn't take yet for me. Thanks.

《Quadfan620》, the trucks don't have to be a fresh install. But, they need to be from Steam. Anything found on the internet has already been messed with and who knows what has been done to it. If you have another mod that applies fixes to the trucks, simply delete that mod and install this one. This mod will apply the fixes to the truck and you'll be good to go. Just be sure to position this mod anywhere above the trucks. The game processes the mods from bottom to top. This mod must be processed after the trucks get processed. It's like applying paint, whichever coat goes on last is the one you will see.

The W900B and T800 will both get these rear steer chassis' soon. Provided I don't hear about any issues wtih the 567.

You're welcome, Jesse.

Thank you!

A note on the new 8x4 chassis as well as the existing 8x4 with a lift axle. The lift axle comes standard with a single standard wheel on each side, but you can also install any of the wide wheels and tires on this axle.

V1.3 is now on Steam once Steam makes it available to everyone. This update does some tweaking to the gauges on the 567 for a little bit better visibility during both day and night. Also, the backlights on the gps and info center on all the trucks gets adjusted a little for better clarity during the daytime.

And since I'm not finding much to fix now, I decided to add a feature. The 567 gets two new chassis'. A short 8x4 and a long 8x4, both with rear steer. The two rear axles power the truck and help steer the truck. There is still a liftable axle in front of these but it is only there for extra cargo capacity. The default "u" key will raise and lower it. The shorter chassis is for the day cab only while the longer chassis can be used with the day cab or sleeper cab.

Mack63740, I don't have any issues with the GTM trucks in quick jobs. All 4 trucks work for me without any crash or any other issue. Make sure you are using trucks from Steam that have never been modified and make sure that GTM Fixes is positioned above the trucks in the mod manager. If it is below them it won't work. Also, remove anything else that might be modifying any one of these trucks.

You might be able to get a clue on what is causing the crash by looking at the last few lines of the game.log.txt file. Let me know what you see there.

These do not work for quick jobs. Closes the game down when activated.

Gtride, thanks for mentioning the turn signal sound working. Apparently, I fixed that without realizing it.

[OSS]TraubeNuss, GTM Fixes was created for the original Steam versions of the truck. The fixes such as the one listed in the SCS forum is no longer needed. No other fix is needed, just this one. As for complete trucks that have had fixed applied, some might work and some might fail miserably. It depends on how the fixes were done.

Thank you. The turn signal sound wasn't working. Now everything is fine.

There are separate fixes for the GTM trucks since a couple of years.
Do you know if these are completely obsolete now?

I have also worked on the gauges of the 567 so they light up better in the daytime. This doesn't affect the nighttime lighting. Tomorrow, I'm going to look for something else to fix on one of the trucks and if I get something going, I will do another update tomorrow.

caldwell6, it's possible there is an error in the original texture file for the gauges from the original truck mod. I have just recreated this file and put it into GTM Fixes. I don't want to do an update just for this because it might still not be the cause of your gauge issue. But, if I do something else significant enough to warrant an update, this will be in there and I hope it fixes your issue. In the meantime, please try to do a test with just the two mods if you can.