when i start pumping the oil out the rig just flips

still wakes the deep

i have a problem when i turn off the aouto dril tinking it wil start pumping withc it doesnt when i trun it back on the rod is miss aligned and the winch start to winch out more rope than i need

I feel like I've been here before, like is deep is waking, and it still is

MCLEARY! MY OFFICE!

I also am experiencing problems with getting the rods

after the first rods are depleted it stopts working properly

how do I spawn this thing

whenever i press the get rod button nothing happens

its not pausing for oil ?

can we harvest WD-40 with this thing?

it doesn't stop drilling after it strikes oil. when i turn off autodrill it still keeps drilling, just doesn't pick up rods. even flipping the breaker for drill power doesn't stop it.

psa to everyone, do not tow it at 90 kn.

@Special Week same opinion

dude you should build the beria D from still wakes the deep

the drilling isn't working

theres a warhead arming key under the bed in the bedroom and im scared

rig is broken

no

is there ANY way to move it once ure in the middle of drilling?

is there ballast

it jams a bit but i think it works well but when i first deployed it and got to the oil it spilled out i dont know if its user error or smt

the pipe keeps disconnecting from the annular

Anyone got ideas every time i load the save it breaks the rig?

hes a little goofy, but hes right. its been tested for a while, the only issue would be that high wind makes it a bit wobbly, except for that. its pretty much perfect

this oil rig has been tested for ages, by quite a few people and they found no issues.

if you are having an issue chances are it is your own fault
try rethinking what you are doing before you comment


@diggerd101, its locked because you are not meant to use it until you have refined the oil

Cant even pump the refined oil out becuase the refinery pumps locked button wont open

@Yourlocal yes, physics and pumping stops beyond a certain point, I wish it didn't but it does sadly. The only thing you can do is modify the tanks to be larger so when you go to sell with your diesel/AV fuel carrier, there is enough made for you when you get back. (IE: Net positive design)

The drill will continue to put rods in even when it has struck oil, causing an endless loop of it not being able to actually get oil for any suitable amount of time, also,the oil doesn't heat up enough for the refinery. This is a great rig and I respect the amount of work put into it, will you ever continue to update it?

so does the autopilot stop at the waypoint? I really just want to let this thing run on its own while i do other stuff

if you catch the thing on fire u get a really cool experience

what does red button do

#3: The heaters required to reach 315*c. This was talked about by the OG author. I read what they said and as such wrapped the whole distillation tower in electric furnaces. It's a huge space heater disaster waiting to happen and in no way at all is supported by even the most lax of fire codes....but It works to get raw oil up to 315*c for refinement. As of the typing of this I still have problems with heat loss, and after about 20min of fuel being refined the temp drop below 300*c. I'm working on ideas. I might update with a post if I figure out something that works good enough.

#4: The rig -needed- a stair case added in the walk though of the drilling ops building. I got so mad at having to run all round the living area, that I just started to jump over the railing to reach the main deck. I added a stair case just to not run though the rig again to get to the next floor and access the drilling ops center directly.

Sorry for spam; screw the 1k limit. I'm done.

#2 The pipe connection process is automatic, but it was far from perfect. The problems I had were that pipes just would not link up. The drill was right, the tower had the pipe moved into place to connect, but the pipe sorta just floated out of range and would not connect randomly. To fix this I added wedge blocks on the front of the drill as to better flesh out the small dinky blocks that formed the guide slot. This lead me to another issue of once the drill started, pipe would just randomly "drop" out of place and just leave the drill, with new pipe hanging to be taken by the drill; however it was seen as the start of a well and auto lowered even though the drill was 15m-20m deep into the sea floor at that point The fix I discovered, as just to add a few extra rails of track for the auto loading tower to ride on. It's dumb, but since I came up with the idea, the problem of drill pipes not connecting went away for at least now the drill works 100% fine for me on auto start.

#1: the cameras are cool, and don't get me wrong they are very helpful; but the size and views suck. To fix this I placed three cameras. The first was on the front of the control building so I did not have to squat down to see out the window in order to look at the top of the drill rig. The second camera isn't so much a placement, but I moved the camera from the pipe lifting rig from a fixed spot on top of the tower. It now sits on the moving pipe lifting part it's self. I just didn't like the fixed view. I also placed a camera high up in the drill rig body so I can have a top down view, it was actually useful to do. The most important camera I put in was at the base of the drill rig as to have a view of the pipe connection process. This was major to me, because I had a lot of problems with the pipe system actually connecting, and wanted to see things without having to run around the rig to get to the drill platform. I also resized all the displays so I could actually see everything

I normally don't leave replies on what people make, however this was just a -really cool- build that seriously impressed me because it's clearly obvious that a lot of time was spent to make something this complex. With all love tho, I need to say that this project had some rather sizable as well as a few "sorta meh problems" that just frustrated me as a player; and I can imagine other players having these issues too. So with nothing but love and respect to the original creator, I'm making this post detail what I did to solve these problems. If by any chance my ideas solve issues for anyone, credit for my problem solving skills would be cool, but In all respect and love to the OG creator, I just need to say that I am not trying to take credit for anything that is not mine. So with the love and respect given for something as cool as this project, the problems I had and their fix are as follows. (pt 1/?)

Nvm,works fine....just had to end up respawning a new one,also somehow an electrical node was unhooked from one of the lineer tracks on the rod base

it was working for me the other day but not anymore,something about the auto drilling i think,,also when you open the container for the rods,the rod mag disconnects and drops and no action on the get rod button.Strange it was working the other day

im confused what happens next when it lowers into the water
mines not doing anything

Dear creator, your oil rig turned out very cool! But unfortunately, electric Furnaces cannot cope with heating oil, and diesel ones use a lot of fuel. I myself tried to add electric ovens, but unfortunately I cannot repeat your design.

i think that the anchors have a max length of 149.99 so it wont connect in some oil hotspots

Refinery doesnt work

hello, i'
m having some troubles with the system the picks up the rods for me it got stuck because of the shelf with rods and i cant find a way to get it out

Great job man

this is kinda great but man i hate autonomus processes with no override... if one thing ♥♥♥♥♥ up, everything ♥♥♥♥♥ up, ive wasted too much time

You should be able to get to the top of the derrick. the lower set of ladders is by the slurry tanks behind the life boats

any way i can get the grantry to let go of the rod? Its stuck after a rogue wave and wont let go so i can just toss the stuck rod

what he means is don't sell it off as your own workshop model to discredit him.

this is way too sick

my proudest nut