The stable version has been updated to v3.1.7 / 稳定版已更新至 v3.1.7

- 默认情况下，模组在漫游模式下将不再跟随城市边界外的目标，可在 “摄像机选项 > 漫游模式选项 > 边界以外的目标” 中更改
- 修复跟随医疗和警用直升机时，应为“轮班”的项目错误显示为“负载量”的问题
- 当 Toggle It! 内某些项目的“Enabled”被禁用时，退出第一人称摄像机后项目对应的界面可能不显示 @ CreatorOfWorlds
- 为原版自由和电影相机添加热键检测：现在可在第一人称摄像机内在这两种模式间切换@ CreatorOfWorlds

- Mod will no longer follow targets outside the city border in Walk-Through mode by default, can be changed in "Camera Options > Walk-Through Mode Options > Targets outside the border"
- Fix an issue where item that should be "Work Shift" were incorrectly displayed as "Load" when following medical and police helicopters
- Fix an issue when "Enabled" is disabled for some options in Toggle It! , the corresponding interfaces may not be displayed after disabling the FPC @ CreatorOfWorlds
- Add detection for hotkeys to vanilla free and cinematic camera: now you can switch between these two modes in FPC @ CreatorOfWorlds

The stable version has been updated to v3.1.6 / 稳定版已更新至 v3.1.6

- 修复以下问题：
* 当在启用 Commuter Destination 的面板时使用第一人称摄像机，按 ESC 禁用摄像机可能会导致面板关闭@ CreatorOfWorlds
* 在极端情况下，过多的异常可能会导致游戏因大量错误通知而卡死
* 使用“跟随模式：游戏原版/模组间切换”键可能会跟随错误的对象@ CreatorOfWorlds
* 在IOperateIt Revisited的驾驶模式下，信息面板切换键失效
- 信息面板切换键现更改为组合键，默认为 Ctrl+I @ CreatorOfWorlds
- 切换光标时现在将显示在屏幕中央

- Fix these issues:
* When using FPS Camera with Commuter Destination's panel enabled, pressing ESC to disable the camera may cause the panel to close @ CreatorOfWorlds
* In extreme cases, too many exceptions may cause the game to freeze because of the large number of error notifications
* Using the "Follow Mode: Vanilla/Mod Toggle" key may follow the wrong object @ CreatorOfWorlds
* In IOperateIt Revisited's driving mode, the info panel toggle key becomes invalid
- Change the info panel toggle key to combination keys, default now to Ctrl+I @ CreatorOfWorlds
- Toggling the cursor will now appear in the center of the screen

@CreatorOfWorlds Replied in DM

Can i suggest another feature :-)
A 'Hide HUD' toggle so the menu bars are not shown in normal play, but otherwise works normally so you can click cims/vehicles.

The stable version has been updated to v3.1.5 / 稳定版已更新至 v3.1.5

- 添加 ACME 支持：
* 在禁用第一人称摄像机时，同时禁用 ACME 中的 FPS 模式以修复位置问题
* 当使用 ACME 的摄像机位置存储功能 时，支持存储当前第一人称摄像机的位置
* 支持在使用第一人称摄像机时调用存储的位置
- 将 “移动/偏移速度” 拆分为 “移动速度” 和 “偏移速度” 设置，并将它们移至各自的设置（自由模式设置、跟随模式设置）@ u did well
- 优化代码
- 更新翻译
* 完成繁体中文翻译

- Add ACME Support:
* Disable FPS mode in ACME when disabling FPSCamera to fix position issues
* Support storing the current FPSCamera position when using ACME's camera position storage
* Support the recall of the stored position while using FPSCamera
- Split "Movement/Offset speed" into "Movement speed" and "Offset movement speed" and relocate them to their respective options (Free-Camera Mode Options, Follow Mode Options) @ u did well
- Optimize code
- Update translations
* Complete Traditional Chinese translations

- Add hotkeys for Walk-Through mode, follow mode, and info panel @CreatorOfWorlds
- Add clearer error notification (hope you'll never see this!), unify logging for exception catching
- Add "All Settings" button to main panel jumping to mod settings
- Increased the height of "Camera Settings" tab to prevent text overflow in some languages
- Now FPS Camera can be enabled in vanilla free mode
- Update translations

- 为漫游模式、跟随模式和信息面板添加热键 @CreatorOfWorlds
- 添加更清晰的错误通知（希望你永远不会看到！），统一异常捕捉日志
- 添加 “所有设置” 按钮至主面板，以跳转到模组设置
- 增加了 “摄像机设置” 选项卡的高度，以防止在某些语言中出现文字溢出的情况
- 现在可在原版自由模式下启用第一人称摄像机
- 更新翻译

The stable version has been updated to v3.1.4 / 稳定版已更新至 v3.1.4

- Fix issue where UUI key modifications were not applied immediately
- Fix units for "Movement/Offset speed" settings
- Fix tooltips for some key mapping settings
- Improve mod detection performance
- Optimize “LOD Optimization”
- Optimize notifications for setting issues
- Improve trigger conditions
- "Quick Fix" now only resets general offset settings
- The "Don't Show Again" state for this notification is now remembered independently
- Update translations

- 修复UUI键位修改后不能立即应用的问题
- 补全“移动/偏移速度”设置的单位
- 补全部分键位设置的提示
- 提升模组检测性能
- 优化“LOD优化”
- 优化设置问题通知
- 优化触发判定
- “快速修复”仅重置通用偏移设置
- 现独立记忆该通知“不再提示”的状态
- 更新翻译

The stable version has been updated to v3.1.3.2 / 稳定版已更新至 v3.1.3.2

The stable version has been updated to v3.1.3.1 / 稳定版已更新至 v3.1.3.1

The stable version has been updated to v3.1.3 / 稳定版已更新至 v3.1.3

- Fix will258012/TrainDisplayUpdated#5 (plugins update will be released after stable release)
- Setting issue notifications will always trigger when issues are detected
- Update translations

Options Panel:
- Add offset settings reset, open wiki button
- Split Camera Options into several tabs
- Move Smooth Transition Options to General Options

---

- 修复will258012/TrainDisplayUpdated#5（插件更新将在稳定版发布后发布）
- 检测到设置问题时，设置问题通知将始终触发
- 更新翻译
设置面板：
- 添加偏移设置重置和打开维基按钮
- 将摄像机设置拆分为若干选项卡
- 将平滑过渡设置移动到通用设置

The stable version has been updated to v3.1.2 / 稳定版已更新至 v3.1.2

- Improve speed unit settings for better UX
- Optimize code
- Add setting fixing notification
- Update translations

---

- 改进速度单位设置，提升用户体验
- 添加设置修复通知
- 优化代码
- 更新翻译

The stable version has been updated to v3.1.1 / 稳定版已更新至 v3.1.1

- Optimizations and fixes for "GameCamController.SyncCameraControllerFromTransform()"
- Info panel: replace the "Home" field with "Hotel" when following a tourist who live in a hotel
- Other improvements

---

- 优化与修复 “GameCamController.SyncCameraControllerFromTransform()”
- 信息面板：跟随住在酒店的游客时，将“住址” 栏目替换为“酒店”
- 其他改进

The stable version has been updated to v3.1.0 / 稳定版已更新至 v3.1.0

- Edit "Fixed camera offset for vehicle in the middle" default values
- Other improvements

---

- 修改“车辆中间部分的摄像机固定偏移”设置默认值
- 其他改进

- Add v2 settings import
- Make the info panel show a prompt when saving offset settings
- Improve exception display
- Fix a issue where specific offset settings were saved along with fixed offset settings
- Update translations

---

- 添加v2设置导入功能
- 令信息面板在保存偏移设置时显示提示
- 优化异常显示
- 修复了单独偏移保存时误将设置中固定偏移一同保存的问题
- 更新翻译

The stable version has been updated to v3.0.9 / 稳定版已更新至 v3.0.9

The stable version has been updated to v3.0.8 / 稳定版已更新至 v3.0.8

- Various camera moving and disabling improvements
- Remove setting reset notification
- Add older TLM version detection notification
- Improve TLM support
- Other improvements

---

- 各种摄像机机移动和禁用时的改进
- 移除设置重置通知
- 添加旧 TLM 版本检测通知
- 改进 TLM 支持
- 其他改进

The stable version has been updated to v3.0.7 / 稳定版已更新至 v3.0.7

The stable version has been updated to v3.0.6 / 稳定版已更新至 v3.0.6

- Optimize the position setting when the camera is disabled
- Fix an occasional issue of abnormal speed display in the info panel when citizen enters the vehicle in Follow mode

---

- 优化摄像机关闭时的位置设定
- 修复在漫游模式下，市民进入车辆后，偶发的信息面板速度显示异常的问题

The stable version has been updated to v3.0.4 / 稳定版已更新至 v3.0.4

- Add path, track position detection settings
- Add main panel fade animation
- Optimize code
- Update translation

---

- 添加路径、轨道位置检测设置
- 添加主面板渐变动画
- 优化代码
- 更新翻译

The stable version has been updated to v3.0.2 / 稳定版已更新至 v3.0.2

- Further fixes for compatibility issues with “Dynamic Resolution”
- Optimize camera position updates
- Optimize UI toggling
- Optimize the “LOD Optimization” function
- Fix occasional non-functionality issue in Walk-Through mode

---

- 进一步修复与 “Dynamic Resolution” 的兼容性问题
- 优化摄像机位置更新
- 优化UI切换
- 优化”LOD优化“功能
- 修复漫游模式偶发的无法正常工作的问题

@Kagami 很抱歉，我未能复现您的问题。请尝试使用稳定版来核查，谢谢！

稳定版已更新至 v3.0.1 / The stable version has been updated to v3.0.1

@ Will258012 [auteur] ,

Thank you for your information about camera position. For me, this version seems to function well and I am a happy user. Thanks.

我的日志文件链接：百度网盘 /s/1bqBfd6qLSZ7M_6HbUS7p1g?pwd=0721

@Kagami 能麻烦发送一下你的日志文件吗？您可以参照下面的评论或这里 https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=463645931 来获知您的日志文件位置。
您可以使用国内的网盘，但请注意您的链接可能会被社区删除，所以您可以像这样（百度网盘 /s/后面部分）来发送。谢谢！

Thank you for sharing that post! Now I know how to share logs in the future with other creators. I can send it to you via Google Drive I'll send you a request right now to send you my email.

@JR896
See here for instructions on how to send your log file (or video):
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=463645931
Thank you!

There's no log for First Person Camera in the cities_data folder, but I can send you a video of the mod issue through discord.

作者您好，更新后的自由模式无法正常使用，会卡住不动，而且无法退出（按esc退出不了，菜单栏也显示不出来）

@JR896 Okay. Could you send your log file (...\Cities_Skylines\Cities_Data\output_log.txt) and video link via Google Drive (seems to be the only link that doesn't get blocked by Steam) or something else? Many Thanks!

It's still broken.... same issue as before smh

@JR896
Should be fixed ...... because the first line of the problem below presents itself pretty much as you and @BlitzercupGaming fed back earlier. If not please also let me know here.

Did you fix the problem with the UI not returning and the game becoming broken after exiting first person mode in a vehicle? I just noticed you updated it a few minutes ago so should I try it again?

- Fix NRE error caused when follow button is not registered
- Optimize camera position updates
- Implement the mod conflict detection method

---

- 修复跟随按钮未注册时导致的NRE错误
- 优化摄像机位置更新
- 实现模组冲突检测方法

@Qui ædíficat
Yeah. You can adjust the "Fixed camera offset for vehicle" setting to do this.
See also here: https://github.com/Asu4ni/CitiesSkylines-FPSCamera/wiki/Camera-Mode#follow-mode