at 1 to 1 settings, with perfect isolation and self cooling turbine setup, tepedizer should be able to power itself with tubine indefenetly, with no energy loss... but scince its round down by a bit, it will eventually stop.

Steam turbine=877590/850=1032.46 dtu/w +10% dtu back as heat.
1032.46*0.8 = 825.968 dtu/w at 80%.
Good balanced option... double the stats we get 1,651.936, or round up to 1652 kDTU heating at 1920 watts with unlimited temperature.

Or if we consider lossless energy conversion, as turbine does leak heat, and therefore it will be impossible to gain power even with 1 to 1 ratio:
Steam turbine=877590*0.9/850=929.21 dtu/w
929.21 multiply by deisred power, best option would be 2 kw, so 1,858,420 dtu, or round down to 1858 heating at 2000 wattage, is another setting that makes sence.
1784 heating at 1920 wattage, or 892 at 960 for default wattage, all with conservation of energy at turbines power baseline.

oh. whoops. i subbed to this w/o reading enough, i thought it also let you change the KDTU and power of the space heater, but it only does that for the tepedizer

is it working?

Should be fixed now

liquit tepidizer target temperature and heat generation in kDTU are swapped in config. Please adjust your mod.

The fix is live

I didnt realize that customizable buildings mod also has this functionality now. so i dont know if they were also conflicting or not...

Can also agree, the mod now doesnt work as intended. makes the heater freeze and target the same temp. so it basically doesnt work ever. Needs an update :/

mod is borked

temperature for adjustment is with watt please update

Unless it only works for me. If that's the case let me know (check by disabling your other mods)

There hasn't been an update to the game so there's nothing to update in the mod. If it doesn't work it's because it conflicts with your other mods

Update please!!

I inverted the values of ExhaustKilowattsWhenActive, and SelfHeatKilowattsWhenActive on the SpaceHeater, but got gas temps stuck at 125 ºC. How do i fix it? Thnx.

Nice https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=3145815349'u

Hey everyone. I've released https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=3145815349 which adds separate coolers to the game. If you're using this mod for cooling puposes I suggest to use that one instead

not cooling "Target Temperature Reached"

I'll take a look Gamegamerz68

Correct: It says "Target Temperature Reached"

I set my target temp for -4 degree F, but will only go to 23 degree F. Once it reaches that 23 it states that the temp limit has been reached. If I set it any where above 23 degree F it will cool or heat but it won't do it the other way. Also I appreciate the mod greatly!

A thermostat? Who woulda thought‽ Much appreciated.

Working Perfect, thx

Yes I can. I'll get it done tommorow

Can you modify the target temperature range? because -200 is not enough for stabilize Liquid Oxygen and Liquid Hydrogen.

Range -259.2 needed for Liquid Hydrogen, obvious is enough also have a Range from -259 or -260 instead only -200.

Only 1 per config. I'm working on a mod that'll add both, but they'll be different buildings

what i need to change to make this thing cool liquids?
that can heat and cool? or only 1 thing per config?

Yep, it does, thanks a lot!

Should work now

Last QoL update broke the mod.

Space heaters can be damaged by overheating

♥♥♥♥ YES I N E E D T H I S B U T B E T T E R

yes

can I drop the liquid tepidizer wattage cost to below 960?

Thank you very much.

LiukeLoveyuyu sure go ahead

Very cool idea, I am also planning to make a similar one, if possible, can I refer to your code and make a similar one?

is there a way for it to do both cooling and heating depending on the set temperature?

Update

Oh, actually - no, they were not. I thought that this mod lets them both cool and heat, while the mod's description
"Setting Heating to negative number will cause them to cool gases/liquids untli set temperature is reached"
meant the ingame target temperature.

Thank you for the help

Is it set to negative heating in mod config?

My liquid tepedizer doesnt actually cool water - it says "target temperature reached" in red font and refuses to work. Mod conflict?
I placed this mod near the bottom of my modlist

P.S. Space heater has the same problem

perfect ty

It's safe

save to delete from a save?

thx bro ;)