I think the different (new) Theme Mixer versions have a backwards compatibility, but it is possible that the mix is broken. I have not tested it out myself recently.
If it's broken, fixing it would be difficult as I no longer remember the exact mix used, and it would take a surprising amount of work to rework the theme mix all the way up to re-publishing it.

TLDR: Not sure if it works, to my understanding it should be ok. If it's broken, I most likely won't be updating it as it's quite a workload to fix it.

if so can you add compat

@IhmeHihhuli ™ does this work with theme mixer 2.5?????

Unfortunately no. If you're willing to do a little bit of work yourself though, it's relatively straightforward to replace the roads in the map editor. Just subscribe to the roads temporarily, load the map up and "upgrade" the roads to mass transit roads, then save the map and voila, you have a mass transit conversion.

The reason there won't be a different version of the map on the workshop is the required work to replace the roads in a sufficient quality to my standards as this map uses the node controller and thus remaking the interchanges is rather laborious if you want to preserve the smoothness. Same applies to the intersection markings that are in place. On top of this, uploading the map to the workshop takes up a surprisingly large amount of work in itself too.

TLDR: If you're willing to put in a little work yourself, it's doable but unfortunately there won't be a different version of the map on the workshop.

Will there be a version of this map with Mass Transit roads instead?

Very happy to hear you found the culprit to the issue. Also thank you for taking the time to share it here in case someone else is experiencing the same issue!

After deleting the barges mod and adding specialized industry, cargo ships finally start spawning.

To be fair, sounds like there's just something fishy going on with the AI. It could have something to do with a mod or an asset you have.

In any case, I unfortunately have no more tips to give out other than just either trying to troubleshoot the issue by removing mods or assets to see if the issue resolves itself or just simply letting the city / game progress and see if there's just something holding the out-of-city ship traffic back - for example, perhaps there's some requirements for some industry sizes or something like that to start spawning in the ships. I'd also try increasing the shipping budget to the maximum for an extended period of time to see if it makes a difference. Some policies might have an effect too. I hope the issue resolves itself!

After more testing, I was able to see the first cruise ship and a couple cargo planes coming in. The vanilla port asset started spawning cargo ships to deliver cargo to other port assets that I have placed. In essence, the ports are using cargo ships like cargo trucks...

Both airplanes and trains come in fine, both passenger trains and cargo, but I haven't tested cargo planes.

That's really interesting. I playtested the map and had no issues with ships coming in. Are you using any mods that could possibly alter the AI functioning of ships? Are your trains & airplanes working normally, or is the issue ship-specific?

https://drive.google.com/file/d/1SRjxZum_MjdI_LTIhXm15T5R_jpYnbzE/view?usp=sharing
here is a screenshot of what I describe. I also have a vanilla port asset but that hasn't spawned any ships yet.

I tried just letting it play and cargo ships spawned from the port but just delivered to other ports I had placed down. The cruise ship also spawned from a harbor but it was transporting passengers to itself and then despawning.

Let me know if the issue resolves itself or if you find a solution! Also, if I come up with any other possible solutions you could try, I'll let you know :)

Will do

@DiamondDoge, Have you let the game run for a long enough while? Sometimes it can take an absurdly long time for ships to start appearing. Could also be a side effect of a 3rd party mod.

The cargo ships don't come.

This looks almost the same as Victoria BC! Awesome map

@River_x2_
Kuulen kyllä That's actually a really interesting idea, I'll definitely keep in in mind on any future projects to make sure to try and incorporate it into the maps! Thank you for the suggestion :) Also, glad to hear you like the map, as always!

Kuules Hihhuli, how about a map with separate cargo and passenger railways? That is what I always miss, because usually train traffic is a huge mess. I'd fix it on this map but I'm a complete noob when it comes anything with map making. Anyways, thanks again for a great map!

What a fantastic Map, i'll be sure to use it in one of my upcoming projects.

I too am not allowed to place anything on the map. When I click to see the whole land it actually zooms in. If you have FPS camera and press tab you can see you're actually underground preventing you to place anything on the map.

Apologies for the delayed response. I don't see any blatantly colliding mods on your lists but anything's still possible. Hopefully you've managed to solve the issue by now!

https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2774752540
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2774752565
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2774752655
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2774752680
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2774752709
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2774752744

These are my mods i think one of them might be incompatible

well it cant possibly be an asset mod i have (which is like 200 they mostly cars lol) but i probably think its another mod... I do Have TM:PE and Procedural Objects but its unlikely its one of those two, so it must be another one. ima see what could possibly be an incompatibility

@Ryzo_Arashikage,
First off, thank you and kudos to you for providing the picture! It's always easier to get a grasp on the issue at hand when there's something to go off from.

Unfortunately though, I've never encountered or seen before the issue which you're having, and I'm afraid I don't have too much to offer in terms of help. I'd suspect a mod incompatibility though - can you reproduce this issue on another map with the same selection of mods active? In any case though, unfortunately I don't have any tips as to which mods in particular could cause this kind of behavior in the game.

If you can reproduce the issue reliably (i.e. happens every time), I'd start troubleshooting by removing one mod at a time and checking back to the map if removing a certain mod has fixed the issue or not. I'd also test it on a fresh save game to rule out the possible issue of a somehow corrupt save-game. I hope this helps in some way!

afterwards it just doesnt let my play anymore idk why...

So i cant see the Areas for sale and it just goes to a blue screen like its in the sky. I have all the mods i need and it isnt loading

ima put the link to the pic here: https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2774731530

Man this map reminds me exactly of my home town minus the valley.

I would love a vanilla version of this map

@bnsanford, I suspect that you can't see the map in the content manager menu either. This is an issue with steam, and happens occasionally. To fix it, a simple hard reboot of steam sometimes works, so I'd start by rebooting steam. To hard reboot steam, shut down steam via Task Manager (ctrl+shift+esc). If rebooting did not help, try verifying the integrity of game files for Cities: Skylines (right click on Cities: Skylines in your library and you'll find the option somewhere there). I hope this helps! :)

Why wont this map load for me? Its not an option after subscribing within my Map list.

verry nice i like it

@iassume, Use the Theme Mixer mod to switch the theme to the Liberty Springs Theme Mix, which is listed in the required items as well :) On top of that;

Visual mods to achieve the same look as in the screenshots:
• LUT: Relight 3 Average
• Daylight Classic (all to classic)
• Clouds & Fog Toggler (disable clouds and edge fog)
• Road Colors Changer ++ (change the road tone to a slightly darker tone)

i just wanna know use which map theme to Achieve the desired effect,thanks

Cool map, used for my project :)

Hi!
This map has been reviewed by BonbonB here :
https://youtu.be/MyVaClJIKoQ

Thank you all for the kind words! Much appreciated :)

@Richard Sweat, If I understood the explanation correctly, the texture you're looking for should be the ruined texture. I don't think there's an option to disable the ruined texture from appearing altogether in the Theme Mixer. I suppose the solution would be to find an alternative ruined texture that suits your taste better? I hope this is of any help :)

@PianoMan023, Unfortunately I have no interest in reworking this map in any way due to other projects that I'm trying to push out of my library of unpublished stuff. Never hurt nobody to ask though! :) Maybe some of my upcoming maps will suit your taste!

@็myrar, This map does indeed leave a lot of room for detailing. The aim was to make a sort of blank canvas for people (and myself) to shape to their own liking. This way it can be played in a less detailed way as well as having room (performance-wise) for detailing work.

Very nice map! But I would say one thing, this is more for the detailer than the builder...

I really like the map itself in terms of topography, detailing, etc, but the highways feel a bit overbuilt for my taste, but of course that's a personal preference. I don't suppose you'd consider a more basic version with simpler highways or national roads? I understand it's a longshot, but I figured I'd ask. Regardless, excellent work!

I love this map, but I was hoping someone could help me with the map's visuals. I have what appears like dirt on the ground around my assets that would form from heavy foot traffic or something as well as alongside the roads. Does anyone happen to know what in the Theme Mix settings I would need to change to remove this?

Esquimalt Lagoon. Nice work.

Sorry for the delayed response. Hopefully you've solved the issue by now. The issue you're having is not dependent on a specific item or mod. This is a glitch with steam workshop itself and it should resolve itself by restarting steam. This means a hard reboot, not just re-opening steam. You can either reboot your whole PC to do this or you can just shut down steam in the task manager (press crtl+shift+esc to open it) and re-launch steam. Hope this helps :)

I am subscribed to this map, but it doesn't appear in my maps list in content manager or in the maps list when starting a new game. I am missing something?

@InfiNorth, I was actually wondering when someone would recognize the original location as I knew it would happen sooner or later The location happened to have an interesting shape to it and I'm personally not so keen on actual real world location "remakes" so the topographies get utilized usually as starting points for my maps. This map was a rather quick project, hence the topography has remained original to a large extent. Glad to hear you consider it a worthy rebranding haha

Pretty hilarious seeing the PNW Victoria, British Columbia rebranded as a Californian-ish landscape. Looks like a pretty solid map though.

Nice!

A bit of kicking forward here and there apparently helped - you´re on a roll baby.. awesome work

I just wish it had some mountains

Thank you for your kind words! Very much appreciated!