I'm still using this ship, lovely.

Well I need a small ship that can go around and fit nicely under the gladius, I might have to make one by my self

I'd like to recommend my own miner, but honestly there's a lot that are far better :)
This collection has something for pretty much every occasion: https://psteamcommunity.yuanyoumao.com/workshop/filedetails/?id=1925482458

Do you have any suggestions on a miner ship that suits well with your ship?

Exactly, you can replace the guns with connectors or whatever else you want. Or you weld up the attachable guns I've made (like this one) and attach them to the rotors. I made this ship before I made the guns, I'll eventually update it, use the premade guns and link them in the description.

Hello. So, if I use a welder or Nanite technology, I will have the whole ship except guns right ? Everything else will be there. Thx :)

With empty inventory it doesn't even need the hydros to ascend to space, so unless you fill it all up with platinum ingots, it should be plenty capable of doing so, probably even without the hydros.

Can this land on Earth like with full inventory?

I just didn't have enough space for large grid rocket launchers, so I put the small ones on a rotor. The rotor is locked and the rocket launchers only shoot forwards and you have to shoot them manually.

whats in pic 8?
a turret

It does not have small grid turrets, just normal guns.

when you add small grid turrets you shuld add wip's turret slaver.

You, Sir jonathan, are a master of detail and creativity. Keep going, I really like your builds!

The Mk1-Phobos and Mk8-Nano definitely fit, I've already tested those. The larger ones maybe, but they would look pretty ugly on this ship anyways. Thanks to how the projectors work right now, the turrets are even harder to build in survival though.

Do you think it would be compatible with some of your other turret BP's that you have on your workshop?

Projectors sadly don't project subgrids at all. Maybe Keen will add this feature at some point in the future. Right now your only option is to just build your own guns onto the rotors. They are fairly simple after all and you can take the screenshots as reference. The rotors are locked by the way, so they are just guns, not really turrets. I'm planning to replace them with standardized guns for all of my ships and uploading those guns separately to the workshop, so you could just weld them independently and then simply attach them.

The BP when projected seems to be missing the gatling turrets and rocket launchers.

The green things are O2/H2's. I used them because they connect from large to small conveyor port and are only 2 blocks thick. Also they look cool :D
The camera is just that, a camera, no other pupose. I just couldn't fit it anywhere else.

Sorry, this is killing me, what are the small (green) blocks you mounted the gatlings on? Apologies, not done rotor turrets before. Also, why the camera or sensor on the front of the missile rotor?

Love this ship. The forward facing cockpit will make it exciting to fly.

I totes could have turned on 'show on HUD' like 20 minutes before I did, but let's just never speak of that. ;)

Thanks for noticing, I missed that. Must have been really annoying looking for that :D

There's a catwalk plate over the internal air vent that my ship printer automatically completed and I was looking for that interior vent forever wondering where it was. Should that plate be colored red (to mark it to be ground down / only partially built?)

Otherwise, WONDERFUL ship!

It's a blueprint. You can copy paste it in with F10, that only works in creative mode though.
In survival you can use a projector (large grid), select this blueprint and then weld it together.

Hey Jonathan is this going to be on the Markets? in game? how would that work? anyway, I hope to see more of your work..

jonathan thanks

Okay thanks.

I used gimp, it's open source and a lot like photoshop

Hey jonathan, I just heard that you got spotlighted by Captain Jack.

What's the program you used to create the Preview image?

What a Sexy Ship you've made!

@Krazee Crab Go to appdate/roaming/spaceengineers/blueprints/local/yourship and just switch out or edit the thumb.png. It has to be smaller than 1 mb though, or else you can't upload it to the workshop. If its already uploaded, you have to upload it again from the game to update the thumbnail.

How did you change the workshop thumbnail cause I haven't managed to work out how to actually change it for some reason lmao

lol, it crashed my game :D

I would definitely use this if space engineers didn't crash whenever i loaded/created a save which has only been happening since the economy update :/ But great work

I don't think it's possible at all to do this with projectors and I think it would be a lot easier to just rebuild them from the screenshots instead of building them separately from a bunch of blueprints and then attaching them. Or you could just build your own guns onto the rotors, they are totally optional after all.

Got the BP's for the subgrids, or is there perhaps projectors installed that have them already?

@jedi.khan It's the Decorative pack DLC , since I used some of the interior blocks introduced in that dlc and also some armor textures it. I am pretty sure you don't actually need it though and can just use this ship normally, it might just be missing the textures and you probably won't be able to use the beds, armoury and toilet :D

i just had an amazing idea:
what if this was added to a mod that changes/adds ships you can buy in the economy update

While the ship looks great the details and quality of the presentation is fantastic! Really well put together!

Steam is telling me I need a DLC for this BP. What DLC item did you use?

well, uhh, I'm glad you are experimenting with new color schemes?

Beautifully done, amazing functionality that looks awesome :D

Oooh ok I didn't know if it was a better alternative to just edge drawing in gimp or not.

Awesome ship by the way! I always love a good small large grid :)

If you export ships with ctrl-alt-e, you can open the exported .obj file with most cad programs.
I used Inventor to do the drawing and then edited it a bit with gimp. Can't really recommed it though, Inventor was struggling hard and needed like 15 gb of ram just to open the .obj

What did you use to get the line art style views of the ship?