Sorry for the late reply, thank you though :>

this can probably work on VTOL's, however not as effeiciently as making a microcontroller specifically for your hovercraft. If you have a similar setup to the one in the picture try using it, but don't forget to set the mode of the microcontroller to the correct one

I thought this was for hovercraft's, not VTOL's. Does it work on both?

or instead of uploading I could share you my screen live, on discord #4143 name is same as here with the caps

so the issue I have always with gyros, is the constant need to keep flying vertical, and I tried it with it on and off, only difference is that the gyro just makes the aircraft resist the wheels brakes even more and thrusts it forward into flight. I did not hook the gyro up to the control surfaces of the aircraft only to your mc. But like I said, it only makes the aircraft want to take off like a normal aircraft pushing it forward to V1 and rotation, not like in should do in vertical take off. I have not posted it on the workshop yet to download, I'll see to it after your comment, I will also take a gander at your aircraft see if there is any differences.

are you using a Gyro? is the Vehicle very imbalanced? are the connections correctly hooked up? are the VTOL Jets build facing the wrong direction?

I recommend looking at my Hovercraft. If that doesn't help, I can have a look at it myself if you want. Because if it's an issue with the MC I should probably fix it.

so I found your controller yesturday thinking it would be my saving grace to make my own harrier, ye I'm having an issue of it not taking off in vertical flight at all, I have used weight blocks to balance it,it primarily either lifts the front or the rear, unevenly. The jet also moves forward as I increase throttle with brakes on when in vertical takeoff, also whilst in normal flight, it has the tendancy to not fly straight, yes the jets are level, but I think adding tilt sensor imputs would help this mc.

Great to hear and good luck with your VTOL :D

thanks for the microcontroller i didn't know where to start with jet VTOL and this helped me tons. I edited it to work with a jet i built and it works well.

Yes I'm here for help! Try editing the values that change the roll-limit as well as pitch. Also, are your thrusters inline with the Center of Mass? that can cause problems too. maybe the gyro overreacts and change it's values and see if that helps. Every plane is different, so if it won't help, just add me here on Steam and we'll work something out! :D

Hey! I'm trying to get this chip of yours to work as it does on "Pigeon". Your jump jet hovers smoothly, but when I'm trying to use this chip on any sort of VTOL it only goes wonky and wobbles around its X- and Y-axis. First I thought it was size of plane which I was applying this, but when testing on small platform it does the very same thing. Steering and all functions work as they should, but wobble is constant. I think it has something to do with values of chip which I should edit. Where I should start trying and troubleshooting? Could you please help me on this matter?

thanks

oh ok

You can also look at my VTOL to see how it works ;)

place it on your craft, that has for example 4 Exhausts that can rotateand have them in VTOL position when in the editor. then just hook everything up as stated by the connections and if then theres still something wrong, play around with your jet values, maybe withe the Microcontroller values or write me on Discord: Random User Mayo#0066.

how do u use microcontroller