if it is a fully funktioning combination with a sunken and a elevated station crossing each other, then please can you make a non mom version of this. Then yours would be the only one on steam and verry usefull.

Hi Clus,

Just wanted to point out that it's kinda possible to take your Glass Underground station and the elevated station you made and slap them together using anarchy and MoveIt to make a hub like the previous guy mentioned. I'm a big fan of all your assets and wouldn't mind seeing this one be redone if you had time though.

Even if there is not a non MOM version, could there be a smaller one? Based on the ground level and raised metro stations we have in the Sunset Harbor release? Want something smallish to act like a transfer like station in my one city. Unless you know of any ideas! keep up the sweet work

Hey ... I doubt that there will be a non mom version ... this is one of my first ever created 3d models and a new version would mean a ton of work to correct all my mistakes I've made with this one .... sry.

No MOM verion pleez...

@asterisk you don t need it. I just haven't removed it from the dependencies... i am not checking all the assets dependencies lists everyday. But that shouldnt be a big deal, because everybody has the possibility to read assets descriptions ... and when they do that that, they'll see, that it isn't needed anymore. Or, as seen in your case, they already know some facts. Btw, the station works with or without the mod...And even did so before the update. But I've now removed the dependency. Thanks.

@clus - I don't believe we still need transport line rendering fix anymore after the sunset harbor free patch.

Nice station!
Can you make the underground metro to LRT (in another version), please?

With Fine Road Anarchy 2 , the stations come back normal~ thanks~~

I see... hope this issue will be solved by someone one day. Any way thanks a lot~

@dacity3000 I saw that issue in Biffa's last video where he was fixing his metro lines and it seems, that this is a vanilla issue :/ therefore there is absolutely nothing I can change about that .... really sorry. And btw asking and providing even pictures is always appreciated ! ;)

Sorry if I bothered, ...

About the sunken tracks rendering problems , I found rebuilding the station might be the solution, but the tracks continue to break the ground like these :

https://drive.google.com/open?id=1CAyjNwULQKWX53dqGLaFvIXVZ1XO8CfM
https://drive.google.com/open?id=1G9wxNpy_FkbH8ZQ5X8omBGaJP1pf4AWu

the same situation on another sunken station :

https://drive.google.com/open?id=1dwf46tKADJsQGT4DyTSPsyIbTy_o9HzR

I'm sure the ground is flat. Or did I do something incorrectly maybe?

@dacity3000 I'll take a look at it (haven't done that so far)... but I am also not sure if I am able to fix that... we'll see I guess ;)

The underground rendering has been broken after MOM update, so I wish you could fix that if you have free time someday ( not in hurry~) , thanks a lot~

Please put this in the hub interchange category!

I still don't understand blender. ^^

Thanks ... :P I've touched Blender the first time in march 18 ...

3rd ever? damn.... I wish my third try would have been this great. ^^

@clus Anyway, I appreciate your work ~

@dacity3000 Thx, but it´s so "outdated" ... I have to do a huge update for this one, really. :P It`s my third ever created 3d model and therfore there are lots of mistakes done creating this ....

Masterpiece

@eclipse4449 Metro to Metro

This is an interchange? Tram/Train/Metro? I can't tell from the description it just says "special type of station"

yeah .. they should.

Will Cims still board the train though?

It depends ... ;) only visual issues because your cims will leave the train on the wrong side of the track.

Are there issues with the asset functionally if the routes are placed on the outside of the tracks?

I would love to see something like this but with the lower level at ground level. And one or both being for trains :)

@Maladroit ... No problems at my end so far. Sry ! :/ The location within the parks menu is no mistake ... I used the tram station tracks template for the station, because with that it´s easier to select the differnt tracks ... I am going to look into that issue, somehow ...

Terrific looking building, but not functioning in Industries? It's located in one of the parks menus instead of metro, and has no tracks/stations when placed. I have required mods installed and enabled.

Still didnt work for me, other track works fine tho. i love the model by the way

@pagaKKK ... I´m sry, but I can´t help you with that. You have to try... maybe replace the station and try again. These issues are related to the MoMod ... There is nothing I can change about that... :/

Hi, I did what you said in the picture, to place the stop on the inner side. But I cant seem to find the side for one specific track (the elevated track, closer to the bus stops) All the other three works fine for me. Ive been trying this for about an hour..

Ok ;) no problemo... they are in the parks menu , because I used the tram track as a template for the station. Unfortunately I wasn t able to move the station to the Metro menu after that .... ;/

nevermind, found them in parks menu

Hi
It shows I have subscribed to this but it does not show up in the metro menu in game. I also cant find your metro-tram station I have subscribed to

Hello ... its all about a "slow hand", the shift key and some patience ... Thats all I can tell about it ... sry. I cannot change anything, because the stop selection behavior is managed by the MoMod.

Im having a problem with the bottom tracks not being able to be on the inner stop. can you help? The upper ones work fine

@wcmhwilson You have to do it with patience ... ;) I am sorry that I haven t another easy solution for you. The tracks are from the MoM - Mod ... so there is nothing I can do. The only thing I can do, is test it on a left hand traffic map myself, to see if the same error/problem occurs at my end as well. But you have to give me some time, because I am not at home right now.

@clus seems like the problem occurs only when I place the station at certain locations, while it became normal again when I place it at another location.I tried it on my same map. Do you know any method in solving this? Thx!

@clus I have been trying hard to place the stops on the inner side of the platform but seems like the game does not allow me to do that, or maybe I am missing something to enable that. Can you show me how to do that? And my city is set to have left-hand traffic, dont know if this affects the stop placing in this station.

Btw nice station and I like how realistic it is. I sub and used other stations of yours as well. Thx for your work :D

@Mister E. Legal You have to put the stop of your line on to the "right" side of the track. Thats the way to decide on which side you cims will and enter the train at the station. The reason for that is, that the MOM - one way tracks are "both - way -tracks" and not "one - way -ones". You can see that at the 13th picture ... ;)

@nicolas-blume Moin... I will look in to something like this. ;) At first I will release a tram/bus station (double tram with a 6 stop bus station) which is alsmost finished. I am working at the little details right now, but the main model is already ready for release. So stay tuned ... ;) And thank you ... :)

Awesome station! I know there are already many suggestions on variations of this...but let me please describe one more

I really need a train interchange with an elevated train platform (or 2 side platforms) and another platform (or 2 side platforms) crossing at 90 degrees, but on ground level.
This could of course have even more variations with more platforms etc. but this gets out of hand now

Anyways, if you could do this and other variations mentioned here you could really become the interchange king!
Thanks for your effort to build these amazing stations

@landandskygirl I am not planning on doing this, because I tried that when I uploaded the asset the first time and that didn´t work out ... :( I am sorry for that inconvenience...

@arKtur Yes, I think that I am going for that length. The tracks of my central station are at that lenght. (21 tiles)

@Clus
Seems so i gonna wait for that asset you mententioned. BTW are you planning to make on that asset the plattforms of the train station 168m long, so that even the realitic trains from the workshop can halt at your new station?

A minor question: will you be relocating this station to the "Metro" tab in a future update? Or is that too much of a hassle?

@arKtur I am not planning to release a second version of this Asset with train tracks. But I have released a huge train station which provides exactly what you are looking for (in some way... the tracks aren t elevated). But it is also possible that I am going to do an interchange station with elevated train- and sunken metro tracks in the future... ;)

Can you do 2nd version of this where you replace the elevated tracks with normal trains tracks, so that Cims can interchange smothly between Trains and Subway? I would heavily need it for my Town.

@landandskygirl Thank you ! :)