订阅以下载
[RF] Storm Drain Pump

Storm Drain Pump by [SSU]yenyang

Rainfall

Pumps storm water into storm drain system. Does not require gravity flow but requires electricity. This asset is mainly used to move water around your city.

Inlet Capacity: 7499
Cost: 2500
Upkeep: 240/week
Electricity: 240 KW

Must be connected to your sewer and water system but only uses 1 water and 1 sewer. It does not contribute to the water or sewage because storm drain water is kept separate.

Storm Drain Inlets and Pumps direct any storm water that is collected to Underground Detention Basins within the same district first, and then to Gravity Storm Drain Outlets and SD Force Main Outlets in the same district once the Detention Basins have reached 80% filled. Anything not included in a district is actually in District 0.

I don't recommend keeping a storm drain pump and an underground detention basin in the same district unless you're intentionally trying to remove water from your city permanently.

Line Not Connected - You don't have any outlets/detention basins in the same district. Add an outlet/detention basin in this district or move the inlet to another district with an outlet/detention basin.

Landfill Full - There is not enough outlet/detention capacity within this district. Build additional outlets/detention basins or wait for the storm to lessen.

See Official Rainfall Guide for more details about the Rainfall Mod

Special Thanks to Snow_Cat because without Asset AI Changer & Asset UI Priority Changer, the storm drain assets would not have been possible.

If you liked the mod don't forget to give it a Thumbs Up Rating!
If you loved the mod don't forget to make it a Favorite!
The Buttons for these are under the slideshow.