Train Simulator Classic

Train Simulator Classic

117 个评价
The High and the Low
   
奖励
收藏
已收藏
取消收藏
文件大小
发表于
53.524 KB
2015 年 5 月 11 日 下午 1:27
1 项改动说明 ( 查看 )

订阅以下载
The High and the Low

描述
In this scenario you are required to drive 2x Class 303 units between Shields TMD & Yoker Depot but due to engineering works at Larkfield your empty stock move is being diverted via Glasgow Central High Level.Within this scenario you will drive between Shields Junction and Glasgow Central Low Level.Please note you may be held for a while at Rutherglen North Junction, this is due to the lack of signals along this section of line unlike the real route.
5 条留言
Selwyn 125 2021 年 12 月 31 日 上午 7:19 
What a lovely run, on bits of track I haven't driven on before. Many thanks.
rouanet.b 2017 年 2 月 2 日 上午 4:08 
scenario original , merci
horsham 2016 年 7 月 21 日 上午 7:58 
Another enjoyable scenario although I did have some signalling issues, a double yellow set back to single yellow after the bridge over the Clyde and a red following a green on the line near Glasgow Central LL. I know this is not a scenario issue but maybe helpful for others to be on the lookout.
snapper50 2015 年 8 月 21 日 上午 12:30 
Not a bad scenario but at start there are some missing pillons also 1 missing signal outside Dalmarnock as all most ran into the back of the tiain in front. Thank you.
brian62 2015 年 5 月 27 日 下午 3:54 
an interesting trip ? some speed changes not posted, but , all in all not bad. many thanks........