订阅以下载
MAZ 7765 Default

MAZ 7765 is an 8x8 that comes in different models, each having a different purpose. This base version is the one with a cargo tent that can hold 22 people, the provided fuel tank or whatever you can fit in it or make your own module.

Models

• Base - Cargo tent + Fuel add-on;
  
• Fuel tanker;
  
• Flatbed - 2 container capacity;
  
• Crane - Can lift 20k mass at max extension but i do not recommend it as it is unstable. Max working load would be 10-15k mass;
  
• Frame - this version is the truck with just the essentials wich allows you to make your own version of this truck which you can post, with credit of course.

• Top Speed - 100 kph
  
• Can carry containers (Flatbed version)
  
• 15k fuel capacity on base version add-on tank, or 42k fuel capacity on the tanker.
  
• Custom suspension which allows it to traverse a lot of terrain at high speeds
  
• Adjustable suspension for a wider but lower stance, or a narrower but higher stance. (Located on driver door)
  
• Rear wheel steering and crab steering
  
• Tools and cables/hoses/ropes.
  
• Manual / Automatic gearbox
  
• Floodlights
  
• SIBTaT Compatible (Dolly trailer)

Go to the rear hitch and lower the rails. Then reverse the truck until the hitch touches the module and park it. Climb up in the rear and extend outwards the crane and lower it until it touches the module, then move it forwards or backwards until it connects. Lift the crane up, and pull it in until the module hits the truck and stops. Keep holding the button to move the crane inside and, on the right side use the "Lift Rails" button to nudge the module up onto the rails. After that connect the winch on the roof to the cable connector of the module and pull it while also disconnecting the module from the crane(button is on the module itself). If it gets stuck when being pulled by the winch use the "lift rail" a couple times to nudge it free.

• ZE Modular Engine Controller