订阅以下载
Southern Pacific EMD SD40R

This is a realistic replica of a EMD SD40R rebuild by the SP Sacramento works based on EMD SD40s.

It is powered by a EMD 16-645-E Prime mover and has 6 axles.

The Wabsim airbrake simulation is the new standard in how Brakes for US-rolling stock work in Stormworks, just to make it even more compatible with older stock, it has my old AirBrake system integrated.
To be controlled or to control more engines, the locomotive is equipped with ESS2.0 MU-system.
This Locomotive also features the first ever fully working Gyra-lights in Stormworks.

Startup:

To start the locomotive, you first have to turn on all fuses in the fuse cabinett.
After this you have to activate the two toggle switches on the main driving stand called "Engine Run" and "Control/Fuel Pump", leave "Gen Field" OFF!
On the back Panel put the engine mode into "start" position.

Then go to the engine starter panel in the engine room.
After priming the Engine for ten seconds press the starter until the engine runs at idle speed.

You then have to enable the generator field switch and put the engine mode selector to "run" position.

After the engine is running either setup the MU system, or setup the loco for duty in the cab.

The Handbrake is located on the longhood edge.

For more infos, join our discord server: https://discord.gg/MsV3w6hmAJ
if you got any questions about the build, ask below or head to the discord.