订阅以下载
Spark HL-2 Fuel Bladder

Yes, I solved the fuel problem with a bigger tank!!

(But this is just for transportation, as most carrying capabilities are nullified - except for small electric connectors)
(But the maximum speed is still around 180 km/h)

Instructions
1. Reverse the helicopter toward the bladder.
2. Allow it to hit the rear of the guide rails.
3. Watch the camera carefully, and drive forward until you see the yellow line (use cargo lights).
(Image below depicts the yellow line on the camera)

4. Once you see it, slam the brakes.
5. Drop the main connector and allow it to connect. (if it doesn't connect - repeat steps 1 - 4)
6. Exit the aircraft, and go to the rear of the bladder, drop the skids all the way to connect, and retract them.
7. Attach all fuel hoses for optimal performance, and turn on the pumps.


Happy flying, longer.