订阅以下载
MWS-B | L76/59 "Cheetah" 76mm Stabilised Naval Gun

Information:
The L76/59 "Cheetah" is a 76mm Medium Weight Naval Gun designed for use on ships as small as Offshore Patrol Vessels and larger Fast Attack Craft, whilst also being a useful secondary armament to larger vessels. The name "Cheetah" comes from its heavy hitting rounds and high fire rate, which will maul down any foe it is used against.

The gun and associated control system include 3 fire modes, Single Shot, Burst Shot (3 Rounds), and Automatic (150rd/Min) allowing you to have the widest range of engagement options for any situation you encounter. The Turret itself has 4 access points, 1 on either side allowing direct access to that side's respective ammunition drum, a hatch at the rear allowing access to the housing, and a hatch in the bottom which can be used for transporting shells from a magazine below the mount.

Currently the gun is only manually aimed, however, It will be shortly given both Radar Guidance and GPS Guidance once I have figured out the ballistic characteristics of the shells.



How to Use:

1. Whilst in the building editor, use the Select Tool on the gun Microcontroller if you wish to un-invert the gun's pitch axis.
   
2. Turn on Monitor Power
   
3. Turn on Turret Power
   
4. Aim (Keys not Mouse)
   
5. Engage Master Arm
   
6. Fire using one of the fire mode flip switches or push button (You will need to load the first shot, recommended you use the single shot button to do this.)
   
7. If you want to increase the stability of the gun whilst pointing at targets, press the Enable Turret Stabilisation Switch, which will allow the gun to adjust to some degree for waves and changes in direction (to a degree).

Features:

• Cameras on both the Turret and Barrel.
  
• A working Gun this time with 80 Rounds of High Explosive Ammo.
  
• Single Shot, 3-Shot Salvo, and Automatic Fire Modes.
  
• Infrared Cameras.
  
• Maintenance Hatch.
  
• Ammunition Supply Hatch below, if mounted on a ship.
  
• Control Station.
  
• Simple Turret 2-Axis Stabilisation

Dimensions:
Turret incl. Barrel:

• Length: 6.25m
  
• Width: 2.75m
  
• Height: 3.00m (525m with Aerial)

Control Station:

• Length: 1.50m
  
• Width: 1.25m
  
• Height: 2.00m

Note: Height Dimensions include 0.50m of base weight blocks which can be moved.

Moving onto a Vessel:
- Use Selection tool
- Make sure not to delete the Turret Micro-controller on the bottom of the weight block, move it to somewhere on your ship.

Part of the MWS-B Collection

Acknowledgements:
Sebastiaz - Turret Ring
Lazakamikaza - Stability System https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2407157379