订阅以下载
DB V100.20

The DB Class V100 was developed in the late 1950s for the post-war Germany as an replacement for steam locomotives in regional and cargo transport.

This loco is german, so every switch, button, breaker or lever is labled in german.

The loco does NOT use WASD to drive it, instead it uses the numers 1-4:

1: Throttle up
2: Throttle down
3: release brakes
4: apply brakes

The controlls might change over time.

to start the Loco, you first have to board the cab.

1. Switch on the "Batteriehauptschalter"
2. Sit down in the direction, you want to travel
3. Turn on the Key-button on the left
4. activate "Leistung" and "Starten"
5. Activate "Luftpresser"
6. activate "Spitze" (Headlight)
7. (optional) activate "Schluss" (taillight) on the other seat
8. wait antill the "C-Druck" is 0 and throttle up.
There are 15 notches, 1+2 are engaging the transmission, 3-15 raise the rps of the engine

Maximum speed (in Reality) is 100 km/h

if your batterie is too weak, you can start the "Hilfsdiesel" (aux. Engine/APU) and recharge the main batterie

The connectors on the Loco are compatible with most carriges (SRC)
Multiple units can be driven, but note, that only V100 of me and my controllcars are compatible with each other.