订阅以下载
Damage Alerts 3

MC 3 x 5

Damage alerts for three (3) zones. Handles logic for fire and flooding. Suitable for small boats with might have only two or three lower deck compartments.

Property numbers used for threshold for easy config. Starting values are:

Fire 50 C
Flooding 5 L

Flooding is detected with fluid sensors. You will need a [fluid port] connected to a [fluid flow valve] and pump to get rid of the water.

Fire is detected with a heat sensor. You can fight the fire with a handheld extinguishers.
Alternate for fire fighting include automatic sprayers or hooking up a handheld hose from your fire fighting and coming down to fight fire. Methods involving water will likely set off flooding alarms so you definitely will want bilge pumps if planning to use those.


You can use the local outputs to trigger local actions or activated painted indicators or indicators on the bridge. Sound can be done by a buzzer though you will want a switch to turn that off if you choose to use one. I find the light on the dash sufficient to get me to look to the damage control board for more information.

The [any fire], [any flood] and [any alarm] can give other alerts.

The [any alarm] is good to have in view on the dashboard thus alerting the player to look around for more issues. An indicator light is good for this. A buzzer is optional and you want a shut off if you do put one in.

Recommend using [any flood] to activate a central bilge pump(s) which is handy on small craft that can’t afford interior volume for a pump per compartment.

Remember and each bilge fluid port to install [fluid flow valves] so water can only flow toward the pump. Otherwise you have made a flood path between compartments and a floods b floods c.

[Any fire] could be used to activate fire alarm audios if you set those up.

You could have sprayer installed to automatically turn on by compartment. There is risk though of flooding. If you have an automatic bilge that can help with that.

Recommend adding a threshold gate for average battery output below 0.1 (10 %) as well. This is easier with my “Average and Test 7” controller here:

https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2380928241