Stormworks: Build and Rescue

Stormworks: Build and Rescue

26 个评价
Agusta Westland AW101 2020 SAR Edition (aka WA 101)
   
奖励
收藏
已收藏
取消收藏
文件大小
发表于
更新日期
2.969 MB
2020 年 4 月 6 日 上午 9:53
2020 年 4 月 24 日 下午 5:44
7 项改动说明 ( 查看 )

订阅以下载
Agusta Westland AW101 2020 SAR Edition (aka WA 101)

在 Whack_AL 的 2 个合集中
Whack_Al Vehicle collection
52 件物品
WHACK AL SAR
21 件物品
描述
This is my take on the Agusta Westland 101 2020 sar edition.
It is a state of the art purpose built Search and Rescue Helicopter.

----------------------------------------------------------------------------------------------------
This craft has a lot of tech please read the description its here for a reason.
----------------------------------------------------------------------------------------------------

[X] STATS
3 JET engines can cruise in economy mode with just 1
Range is untested because it took too long and i got bored :)
max speed of 120+ mph
Fuel reserve tank and normal tank
CREW OF 5
Room for 7
Optional cargo outfits like optional floatation devices and a supply drop that has arctic equipment and and flares

[X] Features
-Radar
-Auto land
-Auto rotate
-2 Gimbal cameras
-Signal skimmer
-Beacon locator
-Droppable GPS locator
-AUTO pilot
-ALT hold
-Automatic Landing gear.

-----------------------------------------------------------------------------------------------------
Start Up Procedure
1] All power switches are about the pilot there are 6 total flip all on
2] turn fuel key
3]ingtion
-OPTIONAL-

4] there is an economy mode feature that is for light work it is much more fuel efficient and produces higher thrust spoiler thrust because it operates off of 1 engine and shuts the other too off.
------------------------------------------------------------------------------------------------------

AUTO PILOT
so the auto pilot is found on the map screen's top right corner. Press the button to pull up the AP menu, in there there are 4 options as follow
1 Manual
2 Home
3 SOS
4 Set save 1

The map will show the direction of the craft, and the wind direction as well.

Manual indicates a manual GPS coordinate and can be entered with the key pad right of the pilot once a coordinate is entered and Manual is selected press the AP start on the screen right of the pilot in the center console.

Home is the the location that the helicopter was last powered up IE every time you shut it down and turn power off the Home coordinate will reset.
to use the Home coordinate select home and press the AP start on the screen right of the pilot in the center console.

SOS is a sos gps signal coordinate
it can be used by the composite out put from a radio on channel 121 using channel 1 (x coordinate) and channel 2 (y coordinate). The GPS locator in the rear of the air craft can be dropped at any time and will give you a GPS SOS signal. The SOS signal also will put a search radius on the map that is red and labeled SOS.
to use the SOS coordinate select SOS and press the AP start on the screen right of the pilot in the center console.

Set save 1 is what it sounds like, at any time press set save to save the current GPS location. The [R] will reset the save at any time to set a new waypoint
to use the Set save coordinate select set save 1 and press the AP start on the screen right of the pilot in the center console.
------------------------------------------------------------------------------------------------------

LANDING GEAR

Landing gear, dont even worry they do their own thing. The landing gear will automatically come out when the craft knows it is not above water and the distance to the ground is about 50 feet away when the craft sense it is over water the gear will automatically fold up.

------------------------------------------------------------------------------------------------------

FLIGHT DATA SYSTEMS

The craft has an auto land that can be used on and off of land when activated over the ocean the helicopter will hover at an altitude of 40 feet
The screen that has the auto land and auto rotate feature will indicate weather the helicopter is over land or water with the color of the bar on the bottom.

The purple line on that screen shows the length of the winch in relation to the ground and when it touches the blue or tan bar it means it is on the ground.
The same screen will also tell you the altitude and the grounds altitude for ease of landing DTG is an abreviation for DISTANCE TO GROUND

The purple bar on the flight data screen is a collective indicator.
The same screen will show the bearing direction H speed aka Horizontal speed, also the V speed aka Verticle speed.

------------------------------------------------------------------------------------------------------

SIGNAL SKIMMER

the signal skimmer can be activated by simply putting the switch to the on position, it will then scan all channels between 0 and 250 and stop if it receives a signal strength greater then 0. Note that when turning it off it will finish its scan cycle before stopping

BEACON LOCATOR

the beacon locator is a simple on of switch in the center console that will then blink an orange indicator and a sound tone.

FLARES

flares are used on the touch screen that has 4 IR flares and 3 ILL short for ILLUMINATION FLARE press the button to release some flares.
------------------------------------------------------------------------------------------------------
5 条留言
sgt. latorre 2021 年 1 月 21 日 上午 1:33 
Noice
Whack_AL  [作者] 2020 年 4 月 29 日 下午 10:27 
Yes you can, use the up and down arrow keys, the collective is sticky and there are multiple ways of looking at your vertical airspeed. @aeroxsepp
aeroxsepp 2020 年 4 月 29 日 下午 3:50 
I cant fly up and down manually!?
The Less Than Forlorn King 2020 年 4 月 26 日 下午 11:28 
Looks great, awesome to have a sticky collective
Xlegend20 2020 年 4 月 26 日 下午 8:04 
love it man great helo ! first that awesome coast guard cutter now this i look forward toward your future works thanks for what you do !