订阅以下载
Enhanced Lift

Enhanced Lift provides the ability to make a lift with named stops, hellavators up a 1024m high even on server clients, and has safety railings.

Lifts and compressors are placed the same as vanilla. Lift stops are placed at the level of each stop so that the left or right side aligns with the 3x3 area of lift. Pressing Shift-E allows configuring the name of the stop and how many lifts to the left or right side that are to be associated to the stop. Multiple lifts in a line can be grouped by setting the lift stop left or right count to the number of lifts to be associated with the stop. Pressing E will call the next lift not in use in the group.

On the lift the Home/End keys will change the destination to the prior/next stop for each press. Holding down control while pressing Home/End will place the lift in manual control mode and move it up or down manually. Pressing control-Del will place the lift in manual control mode and stop all motion immediately. Lifts in manual control mode will not respond to calls at stops.

On server clients there is only one lift for all players [2/6/2019 Disabled for now].


Key Binding can be changed by editing the NetworkTeleporterModKeyBindings.xml file. If the file doesn't t exist it will be generated on first time run.

To avoid conflict issues with Steam workshop updates, configuration files are now kept in a separate folder listed below by platform. Any old configuration files found in workshop folder will be automatically moved.

Windows: Users\<UserName>\AppData\Local\ProjectorGames\FortressCraft\Mods\ModSettings\MadVandal.EnhancedLift

Linux: /home/<UserName>/.config/unity3d/ProjectorGames/FortressCraft/Mods/ModSettings/MadVandal.EnhancedLift

Mac: /Users/<UserName>/Library/Application Support/ProjectorGames/FortressCraft/Mods/ModSettings/MadVandal.EnhancedLift

Information on how configure key bindings is available in the Key Binding Configuration.txt file located in the parent folder.


Update 7/8/2020:
- Fix issue in single player where removing a lift leaves the Unity object behind.

Update 4/4/2020:
- Fix issue with removed lifts on a dedicated server not being removed from the central collection and then breaking the network update process until server is restarted.
- Adjust maximum travel audio volume slightly lower.

Update 2/29/2020:
- Fix issue with key bindings not working on load if key bindings file is created for the first time.

Update 2/24/2020:
- Restore 1/31/2019 changes.

Update 2/20/2020:
- Changes to prevent problems with machine tracking when a manufacturing plant set to automate an lift or stop machine creates it at 0,0,0 to spawn the visuals.

Update 1/31/2019:
- Add support for configurable key binding (see above description for details).

Update 10/22/2019:
- Fix issue where compressor removal/re-placement after a full clearance check does not restore maximum allowable lift extent.
- Increase time for compressor check on world load so lift extent isn't suddenly limited while segments are loading.
- Add popup text when highlighting the compressor.

Update 7/11/2019:
- Fix for lift exceeding maximum on manual control.

Update 2/10/2019:
- Fix to perform lift stop checks when minimum/maximum lift extents change.
- Limit client speed to 8m/s to prevent load in overload.

Update 2/9/2019:
- Fix unwanted downward motion with stepping onto lift from certain sufaces in manual control mode.
- Add lift stop auto-call option.
- Fix to stop lift control interaction when a popup is shown.
- Add downward travel safety check to prevent player from not keeping up with the lift downward motion and falling. Effect usually seen when entering toxic biome.
- Maximum occupied speed is now 16m/s.
- Maximum unoccupied speed is now 48m/s.
- Fix removal of lifts on client leaving Unity object behind.
- Fix for incorrect exclusion area heights sent to Paste Builder.

Update 2/8/2019:
- Fix incorrect linked links count on lift stop info popup.
- Fix issue with server/client stops inncorrectly having an obstructed state.
- Fix issue with client lift calls no longer working.

Update 2/6/2019 (Second update):
- Fix issues with placed stops on clients not being recognized because a prior removed stop was not completely cleared.
- Fix changing of stop scan count settings from client not correctly reflecting on UI.

Update 2/6/2019:
- Fix stop name changes not being transmitted from clients to server.
- Fix issues with client control of lift. Shared lift concept is disabled until all issues cleared.

Update 2/3/2019:
- Remove excess debug logging messages.
- Lift speed for no passengers is now 48m/s.
- Lift can now be called during a destination return on world load.
- Add support for Paste Builder exclusion areas.

Update 2/1/2019:
- Fix distance from lift center where control is possible without being hit by the railing being too small.
- Fix railing colliders not being immediately removed when lift stop is removed.
- Fix automatic mode switch from manual to automatic when a new stop is placed for a lift current near the stop.

Update 1/28/2019:
- Initial release.