Kauppasivu
Scrap Mechanic
Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Scrap Mechanic

Kauppasivu
Scrap Mechanic >  Workshop > Käyttäjän YT_BlueFlame Workshop > Intelligentia Mod > Keskustelut
Intelligentia Mod
Kuvaus Keskustelut48 Kommentit624 Muutokset
snowsune 23.8.2018 klo 14.40
Need help with gyroscope block (Can't adjust sensitivity)
I placed a gyroscope block on my creation and connected it to the w a s d blocks, and it works fine, however I find the gyroscope is too sensitive, even with the slightest tilt it still activates a Wasd block. Is there a way to make it only enable when say the tilt is at over 1 degree? When I read the tooltip it says to paint the Input a colour from white to orange to adjust sensitivity. I have tried painting the gyroscope (as I first interpreted it) and a switch connected to it but neither have had any noticeable effect.

Thanks
< >
Näytetään 1-1 / 1 kommentista
feroid 5.11.2018 klo 12.06 
hellow I do some research in mod creator script and I discover how it works...
sensitivity is more complex..
sensitivity is realtime modificable..

use clasic vanila logic box, paint it as described, connect it TO giroscope
if and only if logic box is in true state, then sensitivity is decreased by number specificated by color of logic box.

so...

for example two active connected logic with white color decrease sensitivity by 2 degree..
if sum of decreasing sensitivity is greater as 90.. then giroscope is disabled..

I hope it help.. :)
#1
< >
Näytetään 1-1 / 1 kommentista
Sivua kohden: 1530 50