Kauppasivu
Stormworks: Build and Rescue
Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Stormworks: Build and Rescue

Kauppasivu
Stormworks: Build and Rescue >  Workshop > Käyttäjän Tigrrer Workshop
Ei tarpeeksi arvosteluja
MAZ 2-1A (Active Container Trailer)
Kuvaus Keskustelut0 Kommentit10 Muutokset
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Vehicles: Vehicle, Multi-vehicle, Delivery, Technical, Creative, Land, Mechanical, Stationary, Subassembly, Advanced
Tunnisteet: v1.8.9
Tiedostokoko
Julkaistu
Päivitetty
385.966 KB
11.9.2023 klo 17.05
16.9.2023 klo 7.25
4 muutosilmoitusta ( näytä )
Vaaditut luomukset
Tämä luomus vaatii kaikki seuraavat luomukset
Tekijä
JarnSorm
Kirjautunut ulos
Tigrrer
Paikalla
Näytä kaikki 343 kokoelmaa, tekijöinä Tigrrer ja muut henkilöt
1,998 Uniikkeja kävijöitä
2,555 Nykyiset tilaajat
28 Nykyiset suosikit

Tilaa ladataksesi
MAZ 2-1A (Active Container Trailer)

1 kokoelmassa, tekijä Tigrrer
TGR Trailers
28 luomusta
Kuvaus
Hi There!
This is my view on how the MAZ active train trailer could look like
That basically means that you can install an engine controller to any car/truck you want, and not get the extra load from its weight while travelling.
- Also, you can stack any amount of trailers you want, and lose not that much speed
- It gives you the ability to carry much more load, and not use extra trucks for the trailers, so you save time and money

It will need a drivetrain microcontroller with a slave system, you will need to connect cable from your truck
With sibtat+ you can turn on its functions
Link to the engine slave controller system

This trailer is part of my MAZ Perestroyka project, other trailers will be released soon



Specifications
  • Max load - 2x4 ton containers
  • Width - 2.75m
  • Length - 14.75 m (16.5 m)
  • Top speed - 140 kmph
  • Fuel - 580L
  • Engine - 11 Cyl Turbo
  • Transmission - ZE 8 gear automatic
Sibtat+ is connected - so you can use it for its main functions



10 kommenttia
< >
Tigrrer  [tekijä] 12.6. klo 4.03 
@cookiesandcream, Hi, electrical cable anchor on the back of the truck and the cable on the trailer dolly.
cookiesandcream 9.6. klo 9.43 
on the red truck in one of the pictures, how do i connect the cable to the truck? which anchor? and what is the name of that truck?
Tigrrer  [tekijä] 2.5. klo 3.50 
@Altera1234
It worked fine with 3 ton containers, maybe its smth about the container weight?
Altera1234 1.5. klo 12.39 
Hey, the whole roadtrain system is really nice and works well, i just find one thing a bit sad. i cant load the trailer correctly because the one front axle is too weak to hold a container up so it just collapses into the ground, i fixed this temporarily for myself by just making it a suspensionless wheel but it would be nice to have a more official fix for this :steamthumbsup:
Rickens_jr 22.1.2024 klo 5.00 
Thanks! im trying to load up a ferry with it and it just seems that the dolly is fantastic at doing it
Tigrrer  [tekijä] 22.1.2024 klo 2.46 
@Rickens_jr, this can be only controlled by cable, but the dolly from this set has RC control
Rickens_jr 22.1.2024 klo 2.28 
can you control it by remote controller?
Tigrrer  [tekijä] 5.10.2023 klo 5.20 
From the sibtat+ panel on capable truck
Cam 5.10.2023 klo 2.37 
how do i turn the engine on?
Tigrrer  [tekijä] 16.9.2023 klo 7.26 
UPD: repainted platform and added hardpoints for the modules