Stormworks: Build and Rescue

Stormworks: Build and Rescue

评价数不足
Gyro Gun Sight for HUD
   
奖励
收藏
已收藏
取消收藏
Vehicles: Air
Microcontrollers: Calculation, Cockpit, Microcontroller
标签: v1.9.25
文件大小
发表于
更新日期
118.900 KB
2022 年 12 月 11 日 上午 7:10
2024 年 1 月 27 日 下午 9:31
7 项改动说明 ( 查看 )
您需要 DLC 才能使用该物品。

订阅以下载
Gyro Gun Sight for HUD

描述
Gyro sight for HUDs, similar to those used on radar-equipped F-86s and other aircraft.
It is simple and uses angular rate and distance measurement.

sample is here
Turret https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2900497447
Aircraft https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2901346582

Sensors Input
Seat View X:Connect with viewpoint X on the Seat.
Seat View Y:Connect with viewpoint Y on the Seat.
angular sensor X:Connect to an upward-facing angular rate sensor.
angular sensor Y:Connect to a left-facing angular rate sensor.
pitch tilt angle sensor:Connect to the forward-facing tilt angle sensor.
role tilt angle sensor:Connect to a left-facing tilt angle sensor.
radar:static

properties
AdjustCenteringYpixel,Xpixel:Change the value when the centre is off-centre.
fixPixelHeadMoveX,UpperY,LowerY:This parameter allows the HUD display to follow when the viewpoint is moved.It is more realistic reflector sight.
avatar:Change by gender.More inputs can be switched by a switch.
Guns:Type of weapon used.no Cannons
BlocksHud2Seat:The number of blocks between the HUD and the seat. See the description of the image for more information.
RangeRestTimeSec:If no radar contact is made for a specified period of time, the default is restored.
DefaultRange:Gun Range of default
RadarContaine:Radar containers are obstructive and should be switched off.
RGBs:Colours can be changed in hexadecimal.

How to set up
1.Connect HUD and sensors.
2.Set the number of blocks between the HUD and the sheet, referring to the image above.
3.Set the avatar. If the avatar is not correct, it will not work correctly.
4.choose gun types.
5.Adjust it with the centering properties If there is a misalignment with the crosshairs when firing while sitting up straight
6.Change fixPixelHeadMove if it is out of alignment with the crosshairs when shoot the gun with the head moving.
7.The rest is optional.

Reference of ballistic Calculation Formula
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2637560408

2022/December/12
fix Spelling error
Handle supported.

2022/December/17
The respective colour can be changed in hexadecimal from the properties.
13 条留言
drachidrachu 6 月 17 日 上午 8:47 
could u make one where the target itself isnt shown, only the gunsight? i wanna make an f5
soup 2 月 3 日 下午 6:54 
How do i edit the muzzle velocity of the projectiles? i want to use this with cannons/rockets but i cant seem to find a direct Velocity value in the code
Old Pops 2024 年 9 月 7 日 下午 7:27 
I figured it out, now my gun tracker is missing
Old Pops 2024 年 9 月 7 日 下午 7:10 
How do i set this up? i read the description and i dont understand.
drachidrachu 2024 年 1 月 28 日 下午 12:12 
Yea i Set it up wrong, works great now
秋雨零時  [作者] 2024 年 1 月 28 日 上午 2:58 
Then set the radar setting to static and the FOV setting to about 0.15.
Also, you need to connect the electricity and send an On signal.
drachidrachu 2024 年 1 月 28 日 上午 2:11 
nah im using it on hud but it doesnt do anything with radar
秋雨零時  [作者] 2024 年 1 月 27 日 下午 9:40 
>>drachidrachu
I put it on the right side of the sample plane.
If you are talking about the Monitor and not the HUD, it is not supported.
drachidrachu 2024 年 1 月 27 日 上午 11:07 
also how can i make the display smaller
drachidrachu 2024 年 1 月 27 日 上午 6:17 
doesnt have lead indicator and also doesnt circle the target