상점 페이지
Stormworks: Build and Rescue
전체 토론 스크린샷 아트워크 방송 동영상 창작마당 뉴스 가이드 평가

Stormworks: Build and Rescue

상점 페이지
Stormworks: Build and Rescue >  창작마당 > C4RB0N 님의 창작마당
평점이 부족합니다.
Beacon Locator Buoy
설명 토론0 댓글17 업데이트 노트
   
어워드
즐겨찾기
즐겨찾기됨
즐겨찾기 해제
Vehicles: Vehicle, Air, Rescue, Sea, Multi-vehicle, Exploration, Technical, Creative, Underwater, Fire, Subassembly, Advanced
태그: v0.10.17
파일 크기
게시일
242.479 KB
2020년 5월 11일 오전 9시 34분
업데이트 노트 1개 (보기)
필요한 아이템
이 항목에 필요한 다른 항목
링크
Youtube (External link) Sketchfab 게시물 (External link)
제작자
C4RB0N
오프라인
C4RB0N와 다른 사용자들이 만든 모음집 474개 모두 보기 (숨긴 상태 몇 개 있을 수 있습니다)
3,912 순 방문자 수
8,286 현재 구독자 수
85 현재 즐겨찾기 수

다운로드 위해 구독하기
Beacon Locator Buoy

C4RB0N님의 2 모음집
Airbus A400M Compatible Equipment
아이템 20개
Beacon Locator System
아이템 2개
설명

Beacon Locator Buoy designed to be used with this Master Station to form a Beacon Locator Network

It can be easily air-dropped from my Airbus A400M Cargo Plane


The System:
This Beacon Locator Buoy + Master Station system allows to locate multiple Emergency Beacons on the map at the same time.

You can place multiple Buoys around the map (up to 60), and the use the Master Station to collect all the information from the Buoys (within 40km).
Accuracy depends on the amount and position of the Buoys: with with a good grid of Buoys you can have ~30-60m accuracy, with bad grid you will have ~100-300m accuracy.

For the best results, place the Buoys with a distance of ~10km between them.


Credits:
CrazyFluffyPony, for his Beacon Locator System




Enjoy! Please consider leaving a Rating and a Comment. Feel free to write any Suggestions or Issues you might have in the comments below.
댓글 17개
< >
Janne 2024년 9월 3일 오후 12시 52분 
Is there a way to refill your plane with Buoys without despawning the ones you already deployed?
C4RB0N  [작성자] 2021년 5월 15일 오전 3시 37분 
@spacechaos202 Have a look at Pony's Beacon Locator System (https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2060370662) , it's the one I used as the framework for mine, and it basically uses both GPS position of the Buoys, and the time between beacon pulses to triangulate the position of multiple Beacon Locators.
Trophy 2021년 5월 14일 오후 6시 54분 
@C4RB0N Hi! I am working on my own beacon locator, but I can't for the life of me figure out how to turn transponder pings into distance from the time between them. If you're okay with sharing, could you please let me know how your system does this?
C4RB0N  [작성자] 2020년 8월 26일 오전 10시 34분 
@KingTiger101 Well, that's still valid for the Buoys, since they don't have electric connectors. So remember not to exceed 180knots when transporting them, and to lock all the Cargo Tracks.
Elonovich Muskowinsky 2020년 8월 26일 오전 9시 55분 
@C4RB0N They were on. I read in another one of your creations' description, that the rails are not strong enough to hold things when going above 180 knots or something like that, so I just attacked a cargo crate with the iso connector and used it to block the buoys.
C4RB0N  [작성자] 2020년 8월 26일 오전 3시 44분 
@KingTiger101 That's because you have to turn on the Cargo Zones rail brakes, from the Loadamaster's Station or Ramps Panel monitors.
They automatically turn on for 20 seconds when spawning, to prevent cargo from moving around freely, and allow you to manually lock the desired zones.
Elonovich Muskowinsky 2020년 8월 25일 오후 4시 26분 
For some reason they all gather at the back of the plane and get stuck. I have the rail connectors on.
C4RB0N  [작성자] 2020년 8월 23일 오전 10시 12분 
@williefili Use a Bigger Workbench to spawn the A400M, and then copy-paste the Buoys inside.
williefili 2020년 8월 23일 오전 9시 12분 
1st of all i cant the creative base wont let me spawn the airbus and 2nd of all i have no clue how to use the select tool.
C4RB0N  [작성자] 2020년 8월 21일 오전 11시 53분 
@williefili You can easily spawn them directly in the Cargo Bay by placing them with the Selection Tool in the Workbench.