you saved my city !!!!!! (: thanks!

It's 8 years old...and completely unnecessary at this point. It was created at a time when you couldn't create water utilities without hex-editing the building data. I'm not sure if it works or not at this point, I don't use it, but it seems ridiculous to run down an asset from the very early days of the game at this point...do something more productive with your time.

Doesn't even work.

处理废水并将处理后的水抽回城市的供水系统。不需要放置在水边，只需要一条道路连接。与车间的其他水设备不同，该设备与水系统有一个工作连接。
有兴趣的人可以参考以下数据:
每周有24万单位的水被循环利用
每周处理280,000单位的水
25 000美元的初始建造费用
每周800美元的保养费。
这也会生成垃圾，而其他两个不会。这是为了模拟并不是所有的东西都能被处理，一些固体废物必须被移走并运送到垃圾场/焚化炉。
对比一下，原来的水泵每周的维修费用为2500美元和240美元，大约产生12万套。而原来的处理厂每周处理约16万套废水，成本约为1.5万美元，维修费用为640美元。所以这在初始建设成本上要多花5000美元同样的水投入和轻微的。

There is a comment that says "Do not place it in an industrial/polluted area".
In RL, at least in Winnipeg, most if not all treatment plants and aeration ponds are isolated from ground water and have flood barriers so during a flood, unless the flood water rise over the protecting walls (which would then have sandbag height additions), the polluted flood waters can not effect the water treatment. Also the underground water pipes are naturally pressurized to minimize groundwater entering the system (my father was a plumber in Winnipeg until 1999).
Because of this we also have some treatment plants in or on the edges of actual industrial areas.
With the above in mind, how difficult would it be to create a modified version that was not affected by polluted ground?

@Cartzilla, Subscribed yesterday. The mod works as advertised. My city's water pumps were getting polluted due to the river running backwards due to diminishing water levels in the river. Once I installed the treatment plants and water towers my cims stopped dying and population began to increase again. Thank You so much for this mod!

@Carlzilla, oh ok if it is a game limitation then no problem

In a perfect world, yes...however, the game isn't set up for that, so this is pretty much the only way to do it.

so this actually produces water? shouldnt this just clean water for the system it is connected tp?

I created a map for myself designed after the US Midwest. So there is lots of farming and open flat land but the problem was I added way to little of water space for my mid/late game city. I needed a water treatment place that would work without taking up space on my rivers. This really helped out. Now my city (farms) works fine. Thank you!

Yes, don't place it in an industrial/poluted area.

It pumps sewage into the water system... Am i doing something wrong?

Yeah, it worked for me when I booted the game up. Not sure what needs to be updated.

I just started a new city using Snowfall map, this mod works fine for me :) Very necessary mod, thanks for your work :)

I haven't loaded the game since buying Snowfall, but I absolutely will update as soon as I have time to get into the game again...which most likely will be sometime tomorrow.

This has always worked flawlessly for me -not sure why it is not showing up on Snowfall.

Update for Snowfall please?

Limitation of the game.

+1
it's dose not recycle the water ,but pump directly from the underground like a water tower :(

Built in an industrial district, poisoned my entire town. Unless I'm very mistaken it seemed to treat the water return to the system as if it was a water tower. Ideally that shouldn't happen since the purification is a closed system, but I can understand if for technical reasons it works this way. Relocated the building works fine, was just somewhat of a shock =)

That looks great :)

Done.

Thanks!

I may add some lights, I was playing earlier today and noticed how dark it looked. I'm not much of a "3d modeler" though, so I doubt I'll update the texture or anything, probably just some pre-lit light props. We'll see.

Love it, are you going to update for After Dark? :)

Could you please fix the textures on this? Each "brick" on the building is about the size of a car.

The textures are a bit iffy but I still use it in most of my cities.

Subscribed when I first saw this. Works perfectly. Never an issue. You just can't put it in the industrial section. No muss no fuss.

I use a 1/4 garbage mod, becuase each house produces something ridiculous like a literal ton of garbage every week if you don't.

I see that the garbage makes total sense, but the game doesn't react realistic on that (the garbage will pollute the water too early and garbage trucks don't behave very clever). So I think, everyone having problems with those kind of mods should change the asset so no garbage is produced. If then placed on unpolluted ground, it should work fine.

Nope, put it in many different places, just to make sure. I don't know what was up.

I still can't replicate the problem, unless I make a bad placement. Are you placing this in your industrial zone? If so, don't. The game treats all assets that pump water without a shoreline as a water tower, and so it will take into account ground pollution despite the fact that this is supposed to purify the pollution. Without creating a custom building AI, there's nothing I can do about that.

Just so you know, I was using this one just recently, and it caused my water pollution to spike at +20% anytime I built one. I went and made sure all my pipes were clear, checked garbage and ground pollution, and couldn't figure anything else out.

Consistently, each time I hooked one into the sewer, my water went bad. Don't know if it's some fault of the mod, or recent updates, or perhaps my own modlist (though I don't have any water altering mods). Felt like I should mention it.

I removed it. It wouldn't save with an updated trash accumulation, so people using it were doomed to have sick cities.

What happen yo your other version ??

It's a little out of proportion... Other than that, it's pretty sweet.

makes sense, thank you mate.

No pollution unless you let the garbage pile up. You need to make sure that this facility can be reached by your garbage trucks.

but no pollution?

It rocks!!

*rimshot*

Hey look it's a brick sh*thouse :v

Ah, okay. Thank you very much.
But I guess many make the same mistake which I made judging by all the defective waste water treatment facilities on Steam Workshop.
Anyway, your facility is one of the most intelligent approaches regarding water supply and sewage treatment. In my opinion you even got quite a fair balancing. (:

All water buildings hav ethe same options in stats, so load another water building.

How did you get the water pipe connection working?

If I load the vanilla treatment plant with props and save it, the game says that there was an error with an object reference. If I load it without props, saving works just fine, but there is no water system connector and I think it cannot be set in the asset editor.

So please tell me, how did you do it? (:

It only pumps dirty water if you place it in a polluted area. Treat it like a water pump/tower, not an industrial building.

Thank very good.

English if you want a response.

Das Ding funzt nicht, es Pumpt schmutziges Wasser in die Stadt und die Leute werden Krank.

You need to make sure to check "use existing props and decorations".