Awesome Thanks

@GermanSpade4
Check the mission params, you can set to use an unlimited arsenal there which should give you access to any items in it instead of being the limited default version.

@GermanSpade4 - My post below has your answer!

;)

hello I am currently working on hosting this on a server and have added ACE and Grad trenches, as well as the SPEX expansion and am curious if there was any way outside of editing the mission in eden to get them in the arsenal?

@StoneGunstar - Until the dev responds/addresses your issues, you can use my mod to 'overcome' this 'issue'.

With my mod, you can:

1 - Heal entire team (or entire sides).

2 - Look at ONE unit and heal that one unit.

3 - Spawn in a 'replacement' unit for a dead unit on your team.


Sadly, my mod will NOT 'bring a unit back from death', but it can replace him! ;)


Link is 2 posts down.

:)

@Luca The revive system doesn't seem to be working regardless of the params set. No mods, locally hosted.

@NoixDeCaucau start a few fresh games and make sure the FOB you deploy is AT LEAST 1km from the starting base. set one up nice and far away and see if any troops you get through zeus are then commandable.
i think i was having this problem on mortain, even though i could deploy the fob any troops through zues i couldnt control, they would deploy but not even show up in the list.
last few plays this seemed to fix it

@NoixDeCaucau - As I run 'different mods' this is not an issue for ME. There is a possible QUICK FIX for you.

It is a mod call MCC4. A VERY good mod. Just load the mod, then mission, then open mod menu.

In it, you can open the map with ALL units displayed and you can do ANYTHING to those units. It is a scaled-down Zeus. And it was around BEFORE Zeus too.

Works great!

Link: https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=338988835


Otherwise, use ONLY the required mods, unsub, ensure actually deleted, re sub and test with ONLY required mods.

Bout the best I can offer outside of verify your ARMA files...

:)

Hello, like some of you, I can't control the AI in Zeus mode. I can create units, but I can't control them. Whether on LAN or online.
Of course, I put myself in the commander slot.
I can't do it on any map/mission, except the one on Mortain in the German camp.
Has anyone finally found a solution?

@Ironcross 84 - Read the comments and you shall find your answer...

;)

is the mission broken i cant build a FOB at all there is no build opions

@Shadow 0-1
That is currently not supported. If you want to change it you will have to edit the "zeus_synchro.sqf" file and adjust the costs for zeus actions there.

Hey @luca,

loving the gamefile, but Im curious how to give zues abilities because it locked for me as I cant put down any assets. where is the section in the file where I can change the properties/abilities of zeus?

@Luca

Got it sussed now, thanks to you 👍🫡 Just need to work on my cr@p gameplay, lol 🤣🫠🤔🤫🤭

@Bret Walda Creator of Curios
Yeah well that probably wont work. Zeus is limited to chaning grouping and giving movement orders.

@Luca,

Cheerz for the swift reply 👍 I'll have another go 🤞🏻

LCtrl +Space is supposed to open 'High Command', I believe? I've used it in vanilla as well as with the, "Hurtgen Forest - Kall Trail" mod?

Anyway, thanks again for the timely reply; off to give it another bash right now!

It looks a great mod, btw 😎👍🫡

@Bret Walda Creator of Curios
To control AI squads with zeus just order them normally. If you group them up with you in zeus you can order them as AI squad mates. Not sure what Ctrl+Space is supposed to do tbh.

To start a new campaign open the mission params when in the lobby, you can delete your progress there.

@Luca

I's probably me, or something that I'm doing wrong, because for some reason, I am unable to 'take control', of the ai squads that I have built at my 1st FOB? I have tried pressing LCtrl+Space, but nothing happens?

I built/recruited the squads from the ready-made tab, not individually. Having built/recruited these squads (x2), + x1 Zeus squad, and used up my initial manpower., I thought I'd close the game and try again the next day; hoping that it would give me an opportunity to start a new campaign, alas, I just start back, same as before?

How do I start a fresh campaign? I am using my own dedicated server, launched in MP, but playing sole (or hoping to, lol)

No other Zeus mods enabled, but I have tried it with them since, as well, with no difference?

I do have a few other mods enabled, though, so could they be the problem? I'll try again, without any of them enabled, and see if that sorts it out?

Cheerz for any suggestions, provided my query makes any sense, lol?

@exmel92
Read the first message I sent to you again, it explains it. You have to use one of the halftracks to build a base first. Then when you are close to the base it will give you a bunch of extra options (no need to look at the base, just be close to it).

@Luca, the problem is that i have driven all 4 cars and when i look at them there are only standard options to do things with the car. i have disabled all mods and still cant build.
The build option is selected when i look at the car by scrolling the mouse wheel i guess? i dont have that option.

@exmel92
You can only get AI by building them at a base you constructed, zeus only lets you command units and not build them.
When you build them there is two buttons. One will put them in your squad, the other will make them only be commanded using the zeus interface.

@Luca, thanks for your answer, but what am I doing wrong,😅? I drove away from the starting position in all the cars. I can only sit as a driver, sit as a passenger and open the hatches. Next to the truck with a machine gun on the cabin, I can go to the armory and move back to the headquarters. I start as a commander, but in the Zeus editor I see that my platoon is not alpha 1-1, but another one. I use the mods zeus enchanted, better inventory, cba a3 and all in one command menu. Please help!

@exmel92
There is a halftrack on the road (open back, unarmed) which you can take and drive into a field (away from the starting base and away from any enemy location). Then when you get out and look at that vehicle you can use it to build a base. Once the base is built you can recruit AI units.

Sorry, English is not my native language and I did not quite understand the tutorial. At the beginning of the campaign, I have to liberate settlements alone? because I can not hire units playing as a commander. I do not understand how to call the recruitment menu.

Your right I forgot about that's my bad been so damn long. Good work none the less

@Dark Demon
This is literally the original liberation by ZBug as is written in the description, its lucky I got his permission I guess.

This is litterly liberation Rx by psiko lmao lucky it's open source I guess

Also liking this version of liberation, not having to worry about production and storage makes a nice change of pace. However no combination of revive seems to work seems to work? players die instantly and are not put in a "downed" state. Playing on a hosted/dedicated server.

I just want to say this is by far one of the best versions of Liberation I've played. Normandy could stand to be a little better optimized but the map looks great and everything runs as it should. 10/10 for Luca thanks for the upload!

Hi,
How do you make a FOB?

@☭ Calabresa ☭
Nah the DLC have no impact on it, though I fail to see what could cause this inconsistent behaviour.
Never had the issue, neither dedicated nor local. Since it works for your friend it also can not be related to the steam upload which was another guess I had since I was testing with the "uncompiled" version. But that be ruled out now as well.

I'm hosting through LAN for my friends through Radmin. A friend of mine has the same issue, though one of my other friends has managed to create a new save and for him it works perfectly normal. I even tried buying all the default DLC thinking maybe I was missing something.

You guys hosting local or dedicated?

like everyone else is saying. no units in zeus

I am having the same issue as @Vivid Naz - no zeus-built squad or unit appear on Zeus mode so I can give them order. There's no way to select them at all. I have activated perms and given myself all perms, still nothing.

@Vivid Naz - I will go a little 'deeper' on what @Luca stated:

"...You can try file verification as well as deleting and redownloading the missionfile..."

What happens AT TIMES, is when you unsubscribe from Steam, it just set the 'Hidden' attribute for that folder. IT IS STILL THERE. (The 'who/what/why' on this, I can not answer.)

So, when you re-subscribe, it just UN-HIDES IT!

And guess what? YOU HAVE THE SAME PROBLEM ONCE AGAIN!

Also, and I CHALLENGE ANY TO PROVE OTHERWISE (with proof), file verifacations, HDD read/writes, transmission protocols, etc. - NONE ARE PERFECT! You CAN GET ERRORS AND NOT KNOW ABOUT IT!

GRANTED, the number is VERY large, e.g,. HDD error rate is for every BIT, there is a 1*10^12 chance of the bit BEING WRONG.

SO, to ENSURE the BEST outcome:

Unsubscribe
ENSURE it is ACTUALLY DELETED, NOT HIDDEN
Re-Subscribe

Other things to examine:

Corrupt OS
Malware/virus
Bad/failing HDD (platter/RAM) sectors


Good luck from a 40+ year degreed Digital Tech

:)

Okay strange, will run through the steps you have outlined there. Sorry to be a pain on this @Luca

@Vivid Naz
Loaded the mission to verify and yes, it works just fine on my end.
I can build the units and see them in the zeus interface and un/group them, give waypoint orders and such.
Quite frankly I have no clue what it might be on your end. You can try file verification as well as deleting and redownloading the missionfile and resetting the savegame (via mission params).

Also I am in the commander slot @Luca

* Removed all other mods
* Verified game files
* Enabled permissions
* Recruited a group of soldiers using Build( zeus)
* Open up zeus
* still no soldiers :( only seeing myself & a halftrack

@Luca

@Vivid Naz
Are you using the commander slot? Check if you have the permissions system enabled, if yes also that permissions are available for yourself. Make sure to not have any zeus related mods running. Sometimes it takes a few seconds for the units to show up too.

@Luca, tried KP liberation and seem to move with Zeus but not a fan of how the mission is setup. I want to get this working properly

@Luca thanks for the response. I keep selecting build as zeus but still the characters are not marked when I go to the zeus menu :(. Could I have maybe set something on the param list to mess this up? happy to share a screenshot too!

@Vivid Naz
When you build troops there should be two buttons, one to have them built as part of your squad the other to have them built as zeus units.

Anyone know how I can see my troops on zeus?? I can only see myself and the mobile spawn point

Okay all of a sudden the half track is available, now it seems I cant move the troops from ZEUS :sad:

@RoyalDart30 - No need to feel silly!

Being silly, is you NOT asking! ;)

'There is no such thing as a dumb question; for knowledge is gained when asking'

:)

Hi Luca,

I just tested it, and you're absolutely right—works like a charm! Can't believe I missed that; I feel a bit silly now, haha. Thanks for clearing that up and for the quick reply!

Appreciate the assistance!

Cheers,

RoyalDart30

@RoyalDart30
The arsenal support hotkeys: CTRL+S for saving loadouts, CTRL+L for loading them.

Hello,

My apologies if this question has been addressed already—I searched through the comments but couldn’t find a definitive answer.

Is there currently a way to save loadouts persistently? While the "SET FOR RESPAWN" option is available, it only works for the current session. If a player disconnects and reconnects, they need to redo their loadout from scratch.

Any guidance or tips on how to address this would be greatly appreciated. Thank you for your time and for sharing such a fun mission with the community!

Best regards,

RoyalDart30