this whas SmallBlock gone large right

when you do make sure it has seperate bleuprint for the crane part
shame you had pc problem

@Locomotor79 Sadly the original save file no longer exists, (was on my old PC that died) so I am unable to edit this. It would require a re-upload, and at that point I feel it would be better to just update the whole design with something new, which I might just go ahead and do at some point.

small qstion could you add the subgrid part aka the Crane for the larger miner as seperate Bleuprint thus 2 extra projectors on this vehicle PLZ aka 3projectors 1 for the crane 1 for the large miner and main 1 for vehicle itself for repairs just in case

@Drunk3nPl4y4 Dude you are the best, I thought I had wasted 2 hours of resource collection

this is perfect.

For all who's having issues with the vehicle exploding (survival) !!!!
1. Grind the Rotor part from the rotor on the truck so that one from the platform can go in
2. Do the magnetic plate and timer first
3. leave the piston extracted so that the magnetic plate is activated ( "Sticks" to the ground, is green lol )
4. do steps 1 and 2 (detach the platform from merge blocks and attach rotor part from platform to truck,
works like a charm :]
You're Whalecum.

Projeto excelente muito bom e funcional

Does anyone know why it explodes when connecting the rotor? ive lowerd all the settings in the control panel but once i click attach, it just explodes. Any help would be helpful, in survival btw.

Heyo! Just finished printing this bad boy in survival and noticed had an issue with attatching the rotor arm. When I pressed button 2 the rotor didn't attempt to connect to the new head. Had to do some troubleshooting to realize that I had to do the attach function from the terminal. Just something I thought that people should know

ah, so that's what that sensor was for. very clever.

I had to look at it in creative, it's been a while since I built this! The red and green indicator lights are controlled by a sensor mounted next to the stabilizer piston on the underside of the truck. IIRC I did it that way to avoid any issues with it being out of sync with the piston position.

great vehicle, but I do have a question, which I'm not sure if its been asked already. how do the lights, between the two vertical button panels, change state when they aren't even in the stabilizer timer block?

my hands down favorite land vehicle its the second vehicle i make after the vert miner

i tried attaching the rotor head on the back assembly explodes on my end and it explodes. any advise?

@ille, cut the red blocks and when it drops use the rotors connect that's all the buttons do anyway but then you have to add the foot and do what the instructions say to make all the internal buttons and switches to work properly

Man this thing is amazing with the 2 vehicles it's a perfect combo, just use the big one to dig a hole to the ore switch to the little miner and go down the hole to the resource and dig what you need lol it's amazing work!

By the way. In lokal the plattform rotor is turning great, fine and smoothly. On the mp server the turning is stuttering and very slow. Any advice here=?

Can anyone explain how to attach it in survival? The red buttons seems to work somehow. How can I do it "manually"?

This thing rocks. Really clever way to put in the sub grid. I appreciate the work that went into that detail. However, lord clang struck when I tried the rotor attach in survival. Still nice job and very functional.

I absolutely love this thing. Thank you, I'm learning about a lot of things I didn't know you could do in this game.

Just to let you know, there's a heavy armor slope tip attached randomly(?) on the side of "Brahmin Cargo 3". If I remove it nothing seems to happen. Is it important in any way?

@BlackFyre Is the stone getting ejected from one of the miners while they're docked? That's the only thing I can think of that would cause an explosion, loose stone with no room to escape from between grids.

OK, So update on my exploding rig. It seems if I unload stone into it that causes the explosion.

This rover is awesome and everything worked all the way up to when I tried mining and attached the miner to the arm and the whole rig exploded. I am not sure what happened but there was a giant block on iron where the arm attached to the rotor and the vehicle was spread in small peices across the field. I am pretty sure I followed the instructions.

Any help on this would be great.

This is absolutely amazing! As ATM_Reaper said the Docking rotor arm needs to be unlocked and then hit reverse until it's at 90 degrees then lock it and proceed to connect the arm. What scripts do you use/recommend?

Outstanding vehicle. I feel like the tolerances are too tight on the vehicle recovery crane. Whenever I try to dock either one, it results in either major or minor collision (haven't tried automation yet). When the swing arm is activated, it seizes up as the VAMS strikes near the cab. Maybe one more block of clearance on the cab would be perfect. Other than that, it's amazing.

This is the coolest vehicle I've ever seen in SE.

Is cool I figured it out, the alignment was wrong, needed to be at 90 degrees, also as was using the auto build mod had to remove the rotor head from the rotor. Just in case anyone else has similar issue.

Does anyone elses just explode when you try to attach the rotor head?

The 1st pic looks like the cover for a Lego box. :)

Great build dude. Looks great!

How arethese vehicles supposed to operate on ELWs without getting flipped or stuck by the cheese-grater terrain *everywhere*?

*cries in fallout*

Great looking vehicle
Can't wait to try it 12x12 is my favourite wheel configuration seems to work really well in SE.

Love the vid too. made me laugh

I love the industrial build of the truck, excellent engineering with the boom setup too!

Are those miners set up for P.A.M. drilling?

@Fips No idea, might be a steam issue?

This blueprint does not show up in my menu even though I subscribed to it.
I can see it in my workshop list but not in the ingame menu.
With the Brahmin MH-1300 everything works. Do you know what the problem is?

awesome! Nice touch with the toolbox lol

why no probe

@bolland83 I learned how to build and work those buttons from creative mode, but it doesn't build 1 part while doing it normally, you explained how to do it, it's the lcd next to the car, but I wish you could take a video of it, it would be better for ignorant people like us.

@EgoLast I just added a video that might help. You can see where the stabilizer piston is located, and how the buttons are setup.

bro where is this stabilizer, i can only see 4 batteries, i can't see the other 2 and this block you wrote, i'm about to go crazy

My favorite part is the little toolbox inside lol

I uploaded a screenshot with the button panel controls and indicator lights marked. Will update the blueprint soon to include those LCD's.

@EgoLast There's two button panels on the inside of the cabin, the one on the right side under the back window has the controls for the docking crane. The Stabilizer (big red button) has to be deployed first to keep the truck from tipping. The middle button rotates the docking crane. Note, there are some safety sensors built in that disable certain functions so you're less likely to have an accident. Stabilizer down = crane can move. Crane not centered = stabilizer can't be disengaged. Stabilizer not deployed = crane can't move. You get the idea.

In the first picture, the back tower is spinning, where do we do this?

@Steelhelix Good catch, I missed it. Should be fixed now.

It appears that the large cargo containers are on different conveyor system then everything else, Is this on purpose?

Does not load with miners, which is why they've linked the two miners above under the "Compatible Mining Ships:" bit. All of these blueprints are awesome btw, good stuff.

Brilliant design, love and going to print it out and put it to work right away.