hm it could be that the piston speed is to fast. try lowering it.

After further trail and error, it seems the only way you can successfully print larger ships like the katana in earth gravity is by placing a landing leg on the ore detector at the rear of the dexterity, standing it up on end and printing it that way. Also, the completed print takes multiple passes

I have had to do some reprogramming of timer blocks, rotors, etc. But the ship printer system issue was some kind of disagreement with the NanoBot Build and Repair mod. I'm not all too sure as to why the pistons are going floppy when I attempt to print the Katana Interplanetary Fighter, but I think it has something to do with me being on earthlike and the gravity. I have made sure that 'share inertia tensor' is selected, to no avail. Next I will attempt to print a much smaller ship and/or attempt the print with the Dexterity Standing up on end 😀

3ch0_17 about the subgrid issue, it could be that the subgrid groups are not set up correctly. i would recommand that you look at the ship in creative and then set it up in survival. hope that helps

Thankyou, I did find it. I've decided to use this ship for survival by means of blueprinting all of the subgrids and then printing out the ship and its individual parts and putting them back together. My current issue is that I cannot get the ships printer system to work as intended, or at all really. The pistons go floppy and the welders don't pull components from the ships inventory. I've been troubleshooting it for the last few hours to no avail - I've got a few ideas how to fix it, though

Hello 3ch0_17, thank you for your comment. Maybe Battle Bridge is a bit misleading. There is a Cockpit in the back with a LCD in front of it. Its, much more protected and located next to the cryo pods. Hope that helps

Hello, I love the build but I have one minor issue: The description makes mention of a Battle Bridge but there isn't one. Again, not a huge issue, but I was hoping for some form of protection for the mostly-glass Bridge.

switch to creative mode build the comand seat or cockpit and set up all Buttons. delet the block under it and aim for the Seat/Cockpit Pres Ctrl+C. press CTRL+V and add the seats/cockpits to the grid. hope that helps

How do you copy a seat with its toolbars? ,🤓

sadly ther is no duplicate button. you cann set up one in creative and copy paste it but you will still have to adjust it.

How did you get all pilot seat having the same toolbars? o_o

thank you glad to see that the Dexterity still gets noticed :)

😊😊 https://youtube.com/watch?v=DvAilL0uAb8

Wegen der zweiten Frage, der Hangar ist eng für die Schiffe die Isaac sollte aber rein passen. Vorne passen zwei rein nebeneinander. Und Hintern theoretisch vier. Die katana passt nur hinten 2 mal rein und zwar neben der Position mit dem Wäldern. Ich empfehle die Wakizashi. Die sind kleiner leichter und haben mhre Up thrust. Wenn du was besonders kleines brauchst empfehle ich die Tanto Fighter und den Ike Miner oder den Idris miner

Hi Mr.[MediC]GER, danke für deinen Kommentar und willkommen in SE. Zu deiner ersten Frage. Das Schiff hat eine Large grid Piston an der ein Large grid Rotobase befestigt wird. Anschließend den Rotor Head entfernen und einen smale grid Rotor Head über das menü des Large grid Rotor Base anfügen. Danach müssten glaube ich zwei kleine Piston auf den Rotor Head und anschließend ein kleiner Projektor. Dann alle Piston zusammen in die Gruppe Piston printer speichern. Dann das grid von der Wakizashi oder der Isaac in den Projekten laden. Den Projekor so ausrichten das das zu druckenden Schiff mit einem Block verbunden werden kann. Dazu darauf achten das es genug Platz hat und gerade so zwischen den 6 Wäldern durch passt. Anschließend den Timer Block "Print 1" auswählen und starten. Orientiere dich an der Copy and Paste Variante aus dem survial Spiel Modus für Referenzen für den Drucker arm. Hoffe das hilft lass mich wissen wenn ich noch irgendwie helfen kann

Welche Subgrids hat das Schiff und wie drucke ich die? Ich weiss dass man die einzeln drucken und an die Rotors oder Hinges machen muss. Allerdings finde ich die subgrids nirgends.

Du empfiehlst ja als Fahrzeuge die Katana und den Isaac XL Miner. BEi mir ist aber das Problem dass der Miner vorne nicht reinpasst, da der Connector nicht an die Dexterity passt. und die Katana nur hinten, dafür etwas shief eingeparkt. Hast du eine andere Enpfehlung weche deiner Schiffe besser passen könnten?

Heyho,

hab mir vor Kurzem das Spiel gekauft und habe jetzt eine sweete Planetenbasis und wollte mal den ersten Abstecher zu einem Mond machen. Und Zack! da seh' ich deine Schiffsreihe und bin am schmelzen. Das beste was mir passieren konnte: super designte Schiffe, genial ausgeklügelt und mega spassig. Freue mich schon bald damit rumzuflitzen.

Als Anfänger sind mir noch ein paar Sachen unklar, vllt hat die Community Lust zu helfen:

Als ich den Flieger gedruckt habe kam die Nachricht "Piston couldnt be placed". Was könnte das sein? Ich habe überall gesucht und keine Projektion eines Piston gefunden, dernicht gebaut war. Evtl. tiefer im Schiff?

Wie funktioniert der Drucker im Hangar? Habe mich in den sitz gesetzt, den Projector gefüttert aber es ist nix zu sehen (auch beim verschieben der Regler). Es wird wohl etas mit dem Piston hinter dem Sitz zu tun haben (der ist fertig gedruckt, allerdings nur einer?)

Thank you but at the moment im not building new stuff

Don't you want another multiplanet carrier model ship that meets the requirements? I really like your work.

Hello Sheety, thank you for your comment. Im Sorry i dont have a non dlc variant of this blueprint.

hello. Would you happen to have a model without dlcou with just 2 decorative blocks? I appreciate your attention, sorry my English is horrible

Hello Kranky, die Beschriftung ist eine bild Datei die in der anzeige gespeichert ist. kopiere die lange schrift zielen von der anzeig und füge sie in den anderen Button ein.

Hi, ich möchte einen button an einem Paneel belegen mit der gleichen Schrift, wie mache ich das? Danke und suuuper Schiff!!!

-Could be welder are on
-No oxygen helmet open
- bad luck..

I am walking through the ship and randomly dying? know any reason i would?

Hello Carebear, thanks for the question. some turret have that feature but not the one on the Dex.
I was working on standaloen Turrets as a Blueprint. but development has halted for the moment. the turret base of these in paticular has no projector for al versions.

DeeMakrar… have you ever considered adding to all your custom turrets a projector with the Custom Turret Blueprint already loaded in???

Or add to your steam workshop teach custom turret for each new ship using made for those poor little turret who get shot off.

hello Arkus, glad you like the ship. about the Turret, i would recomand copying the other turret base and adding it to a projector on the other side. try adding a advance turret head and a conveyor junction the add a projector. for the turret gun. add a small advance turret head to the advance elevation rotor and add a smal cargo container to it. add a projector and past the turret gun in it. sorry its complicated.

@ bolloq thanks for sharing glad to hear the Hermes and Hektor getting some appreciation :)

how can i print/project the side turrets, that ware destroyed, and amazing build!

Bro, been loving your line of ships. You fold origami?
Built a few of your ships in survival now; some of the mining ships, Hektor, Hermes, and now Dexterity has it's own ship building hangar.

Many thanks for your time and uploading these

the only thing better then Se Full time is to have SE In the Real World

^^ yea i would love to do SE full time XD

ok just wondering :D
you DerLazyRat :P

about the Printer / Gyroscope? not yet

DerMakrat have you fix the little issue i mention a bit back??

Hello Master Baiter, could be i overlooked it. thanks for the Info. I will add it for now to the DLC list. and check the blueprint again later.

it actually ALSO required the warfare 1 dlc kekw

Let me know how it goes

Hello Pax. The small crafts are completely interchangable. i would recommend a large Miner Like the Isaac and at least one fighter like Katana. A Gaius for ground exploration would also be nice.

I can't wait to test it. If this ship has half of your magic, it will be amazing :) Can you please update the description of BP and add some ships/vehicles that u we could use depending on the role or planet we will use it ?

hope you can do it :)

you could also put the small grid turret controller on the turret itselfe

I wonder if I can squeeze in a few of the new custom turret controller things in here...

VERY nice! Thank you for sharing this.

Hello rieal right now i dont have the time to post the Blueprint for the Guided Missiles but im trying to post them next week.

I really like the layout of the ship and the attention to details. I am having a hard time getting the subgrid weapons systems to weld up. Can you post the subgrid like you did for the Marathon and Minotaur?

The Dexterity can Hold up to 4 Katana Fighters and 2 Tauro Grays. its tight but managable with a bit of practice.

https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2223796045

Which Fighter of your collection would you recommend to park in this frigate?

Hello Mordoe, glad you like it and habd something to tinker with ;) Docalophagus tha main projector is the large grid projector on the ship.