Update:
Fixed train stop behavior on 2x2 and 4x2 station tracks

I will give that a shot, thanks so much! And thanks for all the amazing contributions to this community :)

hold down shift key to assign stop to other lane

I'm talking about the two lane, standard elevation station track

well if you're using both side entry 1 lane tracsk, then you'll need pedestrian paths attached to both side of the one lane track for both side to be used by people when it's needed.

or are you talking about 2 lane tracks ?

They should be - I replaced vanilla/premade station tracks with this one. Unless, I need to manually add a pedestrian path, in addition to the original construction of the station

are both sides of the track are connected to a road or pedestrian path ?

Hi there- I'm not sure what exactly is going on, but using the both side boarding, I am only able to add stops to a line on one side of the track. Any help would be appreciated!

Cargo tracks are same tracks as passenger tracks

Wish you have some cargo station track, that would be beautiful.

I saw that. Many, many thanks.

Summary for others in case of interest: I struggled connecting middle to double catenary tracks and noticed in that context, that the German Catenary wires are floating above the poles.
This shall be because i may not have activated a style between R1 and R2.
Honestly, i did not go for any package but single elements which i love.
And the workaround appears using a different catenary set in Picker Style selector: The NSW Catenary does the trick for me.
And - yes - REVO's tracks are still the best by what i am aware.

replied on other post you had

For Info: It appears that some REVO tracks do not update the wires on replacement of the catinerary.
Issue given e.g. with:
R2USA W GrCo 2x2 Main
R2EUR WGrCo 2x2 IBCH-W

Fine are e.g.:
RO Railway W GrWo 2x2 Ausser TB
RO Railway W GrCo 2x2 Koblenz TB

Having Adaptive Networks on or off does not make any difference.

I am not aware if this is a potential site affect coming from another mod, but it is interesting that such issue does not occur with the tracks from Ronnyx69.
Btw: I noticed that the Railway Replacer is offering for selection only tracks from Ronnyx69 and none from REVO, which is very sad since the REVO tracks look better in first person.

so I went into the folder and found the files, so started the game to investigate further and found the "issue". So in the rail tab I found all versions, thus also the 2 lane elevated versions. What happened yesterday? Well, I searched using find it 2, selected networks and in there train only, and typed "station". In there, all versions except both 2 lane elevated versions showed up. So that triggered me to think they weren't there.

So they were always there, but unlike all others don't show up in find it 2 when searching for station.

Thanks for your reply btw, and once again thanks for these awesome railways

go to the folder where these networks are located, make sure the file is physically there

Hi, love the Railway 2, looking great. Having one slight issue now:

for these station tracks, the 2 lane elevated both seem to be missing? At least I couldn't find them, while I saw all other variants (I think) you listed in the desciption. So not sure if something goes wrong on my end, or if they accidently weren't added?

Thanks for you great work regardless, again, I love them