I think the mod makes no sense when planes take off from the beginning of the runway anyway, so it's best to stick with the original airports or not use aviation in this game at all.

Is there any way to extend the takeoff run so that planes don't take off so early?

Hey, I saw that you had a few skins on the aircraft that i cant find anywhere. (South Africa. China etc). Could you point me in the direction where to find them please

为什么双跑道的机场滑行道上只能有一架飞机在滑行啊，其他飞机降落之后只会在跑道尽头停着等前面的飞机进航站楼之后才会滑行

Könntest du realistische Airports erstellen? Wie München oder Frankfurt??🙏🙏🙏🙏🙏

Die mod bringt mein game zum absturz!!!

hello is it possible to create a version without the Fence around?

Hello!

While troubleshooting, I found this message in the "stdout.txt" of Transport Fever 2:

"Invalid UTF-8 encountered for File /home/jobst/SSD2/SteamLibrary/steamapps/workshop/content/1066780/2458422619/res/construction/station/air/airport_H.con
This file contains malformed UTF-8 byte sequences. That's probably because it was saved with a different encoding. Please convert it to UTF-8 using your favorite text editor."

I thought you may want to fix this.
Very nice mod otherwise.

Best regards,
AraxEthyr

@zotter.christian No it's not fixed. I'm gonna have to revert back to the Alternate International Airport because of this. I noticed I was losing a ton of money on my Cargo Air route, and saw like 20 planes just circling over one of the towns, even though both runways were clear. Thankfully I only built two airports of this mod in my save, so it's only like an hour or so of lost work.

Hi, how I can get the airport at the first picture with the terminals in the middle?

Is this MOD allready fixed? I mean, do the planes land and start in a "normal" way, or is still just one plane at time possible, and the others flying arround the Airport for a long time?

lol ,how it doesnt have stop points?omg

This mod lacks stopping points on the taxi way, so planes don't land when the gateway is already full.

If you have problems adding a second runway: There are two airports in this mod. Look on the picture. First airport has landing strips outside and the terminals inside, the sencond airport is like the vanilla airport with landing strips inside and terminals outside.

same bug...plane dont want to LAND and the runnway is empty..pls fix asap THX

This file contains malformed UTF-8 byte sequences. That's probably because it was saved with a different encoding. Please convert it to UTF-8 using your favorite text editor.

Is there a solution for the second runway problem?
I can't add a second runway and I don't know why...

Hey, thanks for this mod, it's really cool to have access to larger stands and runways for bigger planes :)

I was just wondering if you know how to remove the fences around the airport. The "Larger Passenger Airport" got an issue with those... Every stand got pierced by fences, it is not the case for the other airport.

Also, do you know how to remove every assets on the airport (Radar, markings, lights,....), this is for a personnal project

If you need any picture, i got some, i just need a way to send you them.
Thanks again for this amazing mod !

Super airport! But the landings do not work properly!

Hey dude, looks like I received a crash at 100% load, here's the stdout. something to do with "
This file contains malformed UTF-8 byte sequences. That's probably because it was saved with a different encoding. Please convert it to UTF-8 using your favorite text editor."

https://drive.google.com/file/d/1CK3PjPbVbOxwsRGHRdb-lJKoWHwlE3LU/view?usp=sharing

Great work! I dont have any problem with the seccond runway, but i DO have a plane bug that allows only one plane at a time. Like it tells the planes runway is busy, go around. But it aint busy at all. Can u PLEASE FIX this issue? I love to use your airports, but for now it's useless ;( Please recode. Thanks

I'm getting the problem with adding a 2nd runway too on one of them. On the other I get a problem where it will only let two planes on the airport at a time and other planes keep going around.

@vacuumtube - Ref finding second runway, could you explain / upload a screenshot. I have hovered over the airport with my cursor in various places but cannot get the blue point. Please advise - many thanks!

I just had the same problem with second runway. For the Huge Passenger Airport, you have to look for the blue point at the OTHER SIDE of the airport ;)

stdout:
Invalid UTF-8 encountered for File .../1066780/2458422619/res/construction/station/air/airport_H.con
This file contains malformed UTF-8 byte sequences. That's probably because it was saved with a different encoding. Please convert it to UTF-8 using your favorite text editor.

刚刚加了一大堆飞机验证了一下。
结果是滑行道以及两个跑道这三条道，只要是其中之一上面有飞机，那么此时在航站楼里面装完客的飞机掉头后就在原地憋着，只有三条道上没有飞机，这个飞机才会从机位里头出来上滑行道上跑道起飞。正常应该是各走各的互不影响。
至于复飞的飞机，它的定义好像是降落的这个跑道，已经滑行道上有飞机，它就会复飞。

这种情况下来如果三个飞机碰巧掐着最小间隔来机场，基本上就开始互斥，两个憋着一个复飞或者是一个降落一个憋着一个复飞，这一顿下来整体效率甚至还不如默认的只给了两个航站楼的机场

机场有个bug，
不管是用了好几个月都没问题的插件飞机，还是游戏自带的默认飞机，在双跑道运行的时候，飞机降落后进航站楼载完客，即使整个机场就它一个，有很大概率原地掉头后就原地停住。同时所有来这个机场降落的飞机都会无限复飞。
（已经确认线路没有点装满再走这一项）

哪怕强行点击停止再启动，也是一小段后停住，或者是再返回去载客，载客完毕原地掉头后再停住

那个飞机从开始拐进停机位开始，到不知猴年马月那个飞机鬼使神差又开始走，走出那个停机位，这个区间别的跑道这个时候准备降落的飞机全部进跑道复飞。

Hi, is there a bug with adding a second taxiway/runway? It does not work like in other airports :(

Great mod - I really like the longer runway. It's much more realistic. Could you enable the option of adding another runway? It does not appear when you press the 'configure' button. Many thanks!

Hi !
Are there any updates referring my planes issue ?

I get Crash To Desktop:
missing file :

airport_runway.lua
airport_taxiway.lua

How do I add a second runway? I see no option to place one when I hit configure.

I'm trying everything since that Day, and sadly the problem persist. Really liked this mod. @elektronikfreak I dont have another airport in my city, thought It was any module, change for vanilla ones and still had the problem.

@Rinaldo, that's an edge bug in the people management of the airport building, do you have other airports active? or Vanilla's

Hey Bro. First of all, thank tou for the great job, love your mods.

I'm having a fatal error when I use this mor in special, I set line and them, when some planes are taxing others coming to landing just give up of landing and suddenly this error comes.


__CRASHDB_CRASH__ struct AssertException: ..\..\src\Game\transport\EdgeReservationManager.cpp:67: void __cdecl transport::EdgeReservationManager::Reserve(const class ecs::Entity &,const struct transport::Path &,int,int): Assertion `pr.first->second.first == entity' failed.
Exception type: Fatal error

Details:

Error message: Assertion `pr.first->second.first == entity' failed.

Minidump: C:/Program Files (x86)/Steam/userdata/405275329/1066780/local/crash_dump/40e452b1-58ba-4e04-83a4-e06ade9452dc.dmp

In file: ..\..\src\Game\transport\EdgeReservationManager.cpp:67

In function: void __cdecl transport::EdgeReservationManager::Reserve(const class ecs::Entity &,const struct transport::Path &,int,int)

可以做小一點的機場嗎

@bewerbung.bernhardt Thank you for your feedback again I found a similar but not identical issue and tried to speculate on the possible reasons. But sorry, I can't solve this problem for the time being. This may or may not have sth. to do with the basic logic of the airport. I'm making a further attempt.

And, I'm sorry that I still haven't found this problem in the released airport. I found it because I was testing my new airport idea. At present, for the airports provided by this mod, everything here in my savegame is running normally.

@bewerbung.bernhardt Yeah now I know what u mean but sry I haven't seen anything like that, except when the planes r moving from hangar to stand. i'll try to test it, but I'm not sure it will help you. Thank you for your feedback again.)

What I meant was:

When I build your airports only 1 Aircraft is moving to the runway.

All the others remain at their plane stands and they are NOT following the
1 Aircraft which is taxiing.
Only when the first plane is in the air the next one moves and so on.

I hope you understand my issue.

Thanks again for everything.

@bewerbung.bernhardt Thank you for your feedback. Sry I didn't understand what you said. Would you please record a video or provide some pics?

Hi I have a big problem with your airport. Whenever I have more than 1 Plane at the airport the plane will STAND STILL until 1 Plane took off the airport.
So only 1 Plane is moving on the airport.
Is there something that I need to do when I build these airports ?
What is wrong with this ?
Thank you for a quick reply

@QQxiaoshui-2 Thx )

It MAY be possible as i've seen it done before on Transport Fever 1 on a mod called Hub Airport

@PanzerScorpionT I like that but don't know how to achieve that

Can you make it so that planes can still land while another landing plane in front at other end of runway vacating the runway, this will reduce go-arounds a lot I think. Heathrow a 2-runway major airport lands planes while another is still vacating. Just a suggestion. Love this! :)

现在有了，我删除了一个模组估计是冲突了。谢谢哈

@骑士39 点在跑道中间，和第一条跑道距离几百米的位置。根据当初建设的机场不同，位置也会分别出现在机场现有跑道和航站楼的同侧或异侧。

啊这，可以描述一下差不多在什么位置吗？还是没有找到

@骑士39 蓝点离得远，不是没有2333

我不能和游戏自带的机场一样建造第二条跑道。当我选择跑道后机场并没有显示蓝点表示可以插入新的跑道，但是航站楼可以正常插入

@zhd89110 该版本无法一次建设两条跑道。请使用和游戏自带机场同样的方式增建第二跑道