For everyone having a crash, a fixed version is now out! https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=3434920353

People commenting "crash" : read further on the comment section here to see a fix for it.

crash on game start

Broken

game crashes

Game crashes on startup with this mod installed, does anyone else have this problem? asking bc I got a bunch of other mods installed, so not sure if it's just a mod conflict or bigger issue that warrants reporting

Is anyone else getting heat transfer through the insulated heavy watt conductive plate?

Fix works, thanks! @INFLAMES @Gebus

All people having errors, please read further down this comment thread, a solution with an updated .dll file is provided, so you can manually fix the mod while waiting for an update.

seems broken with the update

Getting an error while starting up. https://pastebin.com/xpYwdtfU

I still get errors while starting the game and the log mentions the isolated joint plate

update pls

Thank you very much, the fix works like a charm!

thank you for the fix sirrrrr

Since the mod hasn't been updated in over 2 years, I wonder if Davkas would mind if someone else took over this project. It doesn't hurt to ask. (I wish I had the skills to do it myself.)

Hi all,
I would like to confirm that the same fix, made by INFLAMES works on Linux as well, however it's a slightly different procedure. I won't go too far into details, because of you use Linux, you probably know what you're doing:

1) get yourself an archive manager if you don't have one,
2) Find and open the same mod folder from INFLAMES' guide,
3) Open the archive and search for the file in question,
4) You will find 2 of said files. DELETE the one in the legacy folder and replace the other one with IFLAMES' fixed DLL.

Theoretically it should also work on steam deck. Defer to the steam deck guide to access your files there.

@Inflames: Thanks for the fix!
If anyone has issues with getting it to work; make sure you change the dll in the correct location. In my install i had one instance under
\Steam\steamapps\common\OxygenNotIncluded\Klei\OxygenNotIncluded\mods\Steam\2059584551
and another under
"Mydocuments"\Klei\OxygenNotIncluded\mods\Steam\2059584551

The game appears to use the one under "my documents" so changing only the other won't do anything!

@INFLAMES, thank U. somehow you also fixed a other mod that failed at the same time. ( after it worked i pressed en-able all and the other mod also loaded correct)

@Mentir reinstall mod -> remove InsulatedJointPlate.dll from folder "mods\Steam\2059584551" -> download file InsulatedJointPlate.dll from my github release page -> move that file into "mods\Steam\2059584551"

@inflames, i tried your .Dll file but the game dont even start with the mod enabled. ofc all the other ones are disabled.

@Cyc70n3 I'm curious what mod could cause such behavior. could you figure it out and comment here?
you can enable half of them, then check if issue appears.
if appeared - then disable half of those and check again.
if didn't appear - enable half of the remaining ones.
or you can do it one-by-one until your issue pops.

the Insulated Door mod - just checked, it seems to be fine. it is better to post comment on that mod's page, if you have troubles

@INFLAMES, I disabled all my mods, except this one, and on load of the save file, I had Insulated Conductive Joint Plates back :) I just now added back a few mods that I need, and that are working, loaded the file back up and it is still all good👍Certainly a head scratcher, but just glad it's working ok again, and thank you for taking the time to reply and fix the mod 😊

@Gebus, Thank you also for the info regarding the other dll file, I did grab it, in case I needed it, but have not used it as this one is working now. Thank you also for taking the time to respond to my issue 😊

Also, I did wonder if you may be able to look into the Insulated Door Mod, as I use this and it is also broken, I don't see a fix for it, but I may be missing it, as I am very new to github 😂

Thank you.

@Cyc70n3 can you try disabling all modes (except just this one), load your save file and check if your issue stays?

@Cyc70n3 I moved the old file to a backup folder before copying the dll from Github.

It shouldn't make any difference to overwriting the file. But that's the only difference I can think of.

There's another dll on the mod maker's Github page too, provided by one of the contributors posted just recently. The 3rd commit under the Update for November 2024 patch -issue has it in the Steam -folder on the left hand side. It's mentioned in the discussion under the issue too.

Oh! One difference could be that I have only the Spaced Out DLC, not the Frosty one, so also not playing the vanilla either, so that could be a relevant difference somehow.

Hope this helps!

@Gebus, yup, I agree it is odd :) but it is true, every single one of my joint plates are now non conductive ones, I know for a fact that was not the case prior to the update. I also loaded an older file from when I was building my 2nd Vent tamer, I know 100% I used conductive ones here, but they are now non conductive. For info, all I did was copy / paste the new dll into the relevant Steam folder (over righting the original file), maybe there was something else I needed to do?

@Cyc70n3 That's odd, I had both types of those heawi-watt joint plates, conductive and non conductive, and they seem to have remained the same. At least I still find them in my base without having done any changes after a reload.

Maybe you just thought you had replaced them? At least I found some non-conductive ones in places where I thought I had replaced them.

I just see no reason why some would have changed when others hadn't.

@INFLAMES, thank you for the updated dll file 👍
I was able to load my save game, which is really good news.
Only comment, is that I had "Insulated Heavi-Watt Conductive Joint Plates" in all my locations prior to the ONI update, on load with the updated dll, these had all been converted to "Insulated Heavi-Watt Joint Plates" (non conductive). It's not a big deal at all, but just thought I would mention it. Thank again :)

Didn't notice pull request at author's github page, but I did exactly the same fixes: 1) TargetFrameworkVersion 2) Harmony -> HarmonyLib 3) MOVEMENT -> MOVEMENT_MODIFIERS
Without all 3 of those changes the solution won't compile

INFLAMES tested your dll and it at least loads the old save game I had, so much appreciated. Whether it's a perfect fix or not, it at least enables us to play the save games again.

Thank you.

INFLAMES did you take into account all the modifications suggested under the mod's Github page when compiling your dll?

The problem seem to be in this line:
simCellOccupier.movementSpeedMultiplier = DUPLICANTSTATS.MOVEMENT.PENALTY_3;
After new patch the line should look like this:
simCellOccupier.movementSpeedMultiplier = DUPLICANTSTATS.MOVEMENT_MODIFIERS.PENALTY_3;

I have published .DLL under my github account until (or if) more appropriate way is available:
https://github.com/pakvg85/ONIMods/releases/tag/InsulatedJointPlate_Nov2024

mattje awesome where can we find?

I will try publish another mod using same github repository.
I fixed in my computer.

Don't have much experience w/ out of date mods, Is it possible they'll make a fix on github soon or should I just take the L and rebuild...

really would love to see this mod get continued, along with wireless power and wireless automation

Why is nobody fixing this?

At some point someone else needs to breathe life into this mod. If the original dev does no longer do anything about this, it should be considered abandoned.

The work on Github seems to already have been done (by others, not the dev), just the implementation is missing.

This is just silly right now.

Hi, same, it stopped working. Stacktrace below:

Exception in RegisterBuilding for type LongInsulatedWireBridgeHighWattageConfig from InsulatedJointPlate
System.MissingFieldException: Field not found: single .SECRETIONS.PENALTY_3 Due to: Could not find field in class
at BuildingConfigManager.RegisterBuilding (IBuildingConfig config) [0x000cb] in <96bf83e479e841629616de31cacb5606>:0
at (wrapper dynamic-method) GeneratedBuildings.GeneratedBuildings.LoadGeneratedBuildings_Patch6(System.Collections.Generic.List`1<System.Type>)
...

Doesn't work with build: U53-642695-SC

Fix pls! I dont want to rearrange all my base. tks

My base is melting without this mod xD

pls

Please update mod. Thanks

when fix for update?

Hope the Github thing goes through soon.

All the update work seems to be done already.

Looks like there's a pull request open for it, so hopefully it won't be too long! https://github.com/davkas88/ModNotIncluded/pull/12

They renamed one of the nested classes in the game code base. The mod is using the old name, hence the problem. This one: TUNING.DUPLICANTSTATS.MOVEMENT_MODIFIERS, used to be known as TUNING.DUPLICANTSTATS.MOVEMENT.

Also, it looks like Harmony namespace changed from Harmony to HarmonyLib.

Not working with Build: U53-642695-SC

I'd rather rebuild this mod than my base rn