Página de la tienda
Stormworks: Build and Rescue
Todo Discusiones Capturas Artwork Retransmisiones Vídeos Workshop Noticias Guías Reseñas

Stormworks: Build and Rescue

Página de la tienda
Stormworks: Build and Rescue >  Workshop > Workshop de PenguinO > [Lua]Heading Display (analog) v2.3
[Lua]Heading Display (analog) v2.3
Descripción Discusiones0 Comentarios18 Notas sobre cambios
18 comentarios
< >
Twitchy115 17 ENE 2023 a las 17:51 
I want to, it just does weird things when I connect it up.
PenguinO  [autor] 17 ENE 2023 a las 17:23 
@Twitchy115
If you don't want to connect wind sensor+2 linear speed sensors(direction), you should use the other version which also has smaller footprint.
Twitchy115 17 ENE 2023 a las 1:05 
When I start moving the wind indicator just sticks to the right of the monitor and becomes huge. I have a screenshot that I don't know how to add
PenguinO  [autor] 24 DIC 2020 a las 1:58 
Yes, that's the practical way people do (I believe) :)
192.168.0.138 24 DIC 2020 a las 1:39 
Hello, can i modify your indicator for using in my autopilot, which i will upload to workshop? (of course I'll mention you and leave a link)
BRuthless 24 NOV 2020 a las 14:28 
I managed to get it to work correctly in a boat. For some reason I had to add +0.5 to the left tilt sensor. Placing the sensor differently doesn't seem to work. It's facing to the left like on your planes.
PenguinO  [autor] 23 NOV 2020 a las 22:17 
There is forward speed condition check for stop mode and airborne mode (airplane).
It was designed for use on airplane.
BRuthless 23 NOV 2020 a las 18:10 
The wind inficator works as expected when standing still, but when I start moving the indicator flips to the other side. I tried inverting all the inputs, but that didn't fix it. Has some update broken it?
PenguinO  [autor] 20 AGO 2020 a las 22:52 
Use property mode of vehicle editor
Nosey 20 AGO 2020 a las 11:07 
do i set the linear speed sensors to directional?
MonkeyKing73 30 DIC 2019 a las 3:20 
Haveing a hard time getting this one to display?
PenguinO  [autor] 26 SEP 2019 a las 23:42 
Recommended position for wind sensor is center (of Left/Right) and close to CoM position.
ecwskier 26 SEP 2019 a las 15:48 
i have the wiring setup should the wind thingy be ontop of my plane
ecwskier 26 SEP 2019 a las 15:48 
hmms
ecwskier 26 SEP 2019 a las 15:39 
hmmmmssss
PenguinO  [autor] 26 SEP 2019 a las 15:35 
There is limitation that wind indicator may give some error when aircraft is banking hard or is slipping sideway.
If there yellow triangle is always visible at same part of screen, check your wiring.
ecwskier 26 SEP 2019 a las 10:26 
whenever im flying the oarange is always just on the right even when i trun and its super thick why is this
One Blitz Pepe 14 AGO 2019 a las 9:26 
nice job