塔罗斯的法则

塔罗斯的法则

Sornukiz(recon.) - Old Version
26 条留言
darkgreenblue 2020 年 9 月 12 日 下午 12:04 
Hello, your Title and description says Old Version, then also says New Version with a dropbox link. Is there still a version for legacy 326589 that can be downloaded?
LeoTehEpic 2.3 2019 年 12 月 31 日 下午 6:24 
Note: The 2 extra jammars were cheated out for clarity purposes.
LeoTehEpic 2.3 2019 年 12 月 31 日 下午 6:18 
You can take both cubes out of light bridge by putting them at the end of the bridge, then using them to jump up the wall and get out. Use the jammer from long range to take out the turret.
By taking one cube into Painless you can get the recording and the cube out. This makes 21 cubes (18 from Tic-Tac-Toe, 2 from Light Bridge, 1 from Toggle), a jammar, and a recording.
Light Bridge: https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1955053224
Painless: https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1955058111
For Painless: Enter from the jammar on the cube side (need 3 cubes) turn on the wall, place the cube where I did to get up, jump from one jammar to the next to get out of bounds, then use the cube to get on the wall, then on the rocks to get over the wall (tricky part, it falls). Then go back in and leave with the same method to stop the recording.

Total: 21 cubes, 1 jammar, 1 recording. You can't get the second cube out of Toggle, the walls are too high.
LeoTehEpic 2.3 2019 年 12 月 31 日 下午 5:19 
Better solution for Tic-Tac-Toe: Go to Toggle, stack both boxes near the wall jutting out to the right of the sigil. Jump on the broken pillar, then the boxes, then the wall, pick up a box. There's a pillar you can put the box onto to then get up the entire wall and out of bounds. Walk around behind the Tic-Tac-Toe sigil, jump over the small wall (or take a box and get over the other wall) and pick up the sigil.

Boxes to get on the wall: https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1955013244
Box to get over the other wall: https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1955013291
Tic-Tac-Toe without box: https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1955013356
With box: https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1955013321
ma.hirsch  [作者] 2019 年 11 月 24 日 上午 11:31 
Ok, I tried it.
It is possible to carry 19 cubes and a jammer in front of the stage.
exe 2019 年 11 月 24 日 上午 10:36 
Challenge: bring the recorded robot (the blue one when played) outside Painless (the puzzle whith the recording device) and into Tic Tac Toe.

I think it is possible, please take a screenshot when succeeded. :-) :steamhappy:
exe 2019 年 11 月 24 日 上午 8:16 
The connectors and the boxes they sit on can only be separated by jumping on the fan beneath it, that means you are stuck and the only way out is to reset or restart.
exe 2019 年 11 月 23 日 下午 3:17 
Tic Tac Toe puzzle
I got 10 boxes out of the cage
I haven't figured out (yet?) how to get 13 boxes or more or all out of the cage.

The connectors on the boxes in the cage can be separated from the box they sit on by jumping or putting another box on the fan beneath the box with a connector.
exe 2019 年 11 月 23 日 下午 1:53 
exe 2019 年 11 月 19 日 上午 10:40 
@ma.hirsch:
Thank you for creating these puzzles. I have not seen these ideas these puzzles are based on before. :steamhappy:
exe 2019 年 11 月 19 日 上午 10:35 
The 3 laser beams are on all the time in this puzzle.
The switches turn on or off the fans.
When the player stepped on a fan (accidently or by purpose) the player is stuck (fan is on or off, boxes on it or not, does not matter) and the only way out of it (that I know) is to reset (hold X until reset).

First I solve this puzzle (that's easy) then get one box from another puzzle in this puzzle to get in the cage. When this puzzle is solved, all the fans with boxes without a laser are off so the player can take them. The boxes with a laser on it can not be taken.
ma.hirsch  [作者] 2019 年 11 月 18 日 下午 9:44 
@exe:
That's not how it is meant to be.
Use the switches to redirect the laser beams.
exe 2019 年 11 月 17 日 上午 6:13 
Got stuck in a box

I found no other way to get out than to reset (hold X until reset) so have to restart

Sometimes, I got (accidently) stuck in the airflow of one of the fans, here I also found no other way out than to reset and restart.

So I have not been able to get out of the cage (yet?) I know have to stack boxes like stairs but I got stuck (litterally). :steamfacepalm:
cruisinglive 2019 年 6 月 6 日 下午 10:51 
So happy this mod now works. I really enjoyed it. The only bad thing about it is there are only 5 puzzles. Would have loved more. Interesting and creative.
pumpkinbread [#FixTF2] 2019 年 6 月 4 日 下午 4:02 
pumpkinbread [#FixTF2] 2019 年 6 月 3 日 下午 3:57 
@kbogue01 - CHALLENGE ACCEPTED :kungfusam: :okaysir: :fstarcoffee:
kbogue01 2019 年 6 月 2 日 上午 4:37 
I will echo the others in thanks for re-constituting this map to a workable format.
I had never been able to run the original and was very curious as to what was inside.

The Lightbridge puzzle is probably the gem of the group as it was clearly using a mechanic not frequently considered.

As far as breaks:
There are speed run videos out there that detail the fastest of the breaks, but given the wide open architecture of the map, there are at least 1-3 OTHER breaks that can be worked out for each puzzle.
A side challenge is to see how many cubes can be removed from the cage. There are at least two ways I found to get the full set (minus those with the connectors mounted). Obviously that many cubes breaks the other puzzles.
pumpkinbread [#FixTF2] 2019 年 5 月 29 日 下午 11:48 
this was a great map! challenging, but doable, i guess. good job. i mean, i found out a way to break 3/4 of the puzzles, but still! lol :steamhappy:

ps: could use more :jammer:s imo, but that's just me cuz i'm stupid with complex puzzles
robert.digi1 2019 年 5 月 29 日 上午 11:34 
Thanks...
ma.hirsch  [作者] 2019 年 5 月 29 日 上午 9:12 
@robert.digi1:
See in the description.
Sorry, I forgot to enter.
robert.digi1 2019 年 5 月 29 日 上午 7:49 
I downloaded the patch for the new version...How do I install it to make it work The Talos Principle?
DarK_SaCoR 2019 年 5 月 27 日 下午 11:54 
Thanks to both. I going to play now because it never worked.
ma.hirsch  [作者] 2019 年 5 月 27 日 下午 11:21 
You're right, I'll do it right away
Harry Poster 2019 年 5 月 27 日 下午 11:17 
I think you should also mention original author and perhaps add link to original workshop page.
ma.hirsch  [作者] 2019 年 5 月 27 日 下午 11:15 
Thanks for the link.
I copy it into the description.
Of course I mention your name.