struggling to get slip roads to connect properly - one did it, but all the others act like it's a 6 lane normal road, not a 3 lane motorway, so the median gets tarmac and cars from both directions can take the slip. just don't know how the one that does work is different. any ideas?

- found it, use TMPE Lane Arrows to set the slip roads to only feed in

@dxjs123 The road markings are part of the textures so cannot be changed without amending all roads - this isn't something that I would do. They were designed to work best with the UK Roads map theme which has a road texture that I considered to be 'most British'.

I like these roads,and these roads are great,but there is an issue that the lane lines are not visible when the road color is light(such as RGB=127,127,127),so could please fix it?or maybe something I ignore to subscribe? thank you!

all road shoulder pavement in this uk road project flicker glitch, road lines and marking only visible in closeup view. i mean very close. i sub the theme for this and theme mixer, change the theme for road, but not help much

@[USVB] KeiwaM You can unsubscribe the cat’s eyes and they’ll work just fine.

Is it possible to use the roads without the cat's eyes? Either by a setting or unsubscribing from the pack?

since i subscribed to this my game keeps crashing

Thanks for getting back to me, yes they were all enabled, but i have just found the issue, hope if anyone else has the same issue this info help
I opened loading mod tool and clicked load enabled assets. so im ok now

@sicampbell82 Please make sure the roads and props from the packs are all enabled in the content manager.

Hi, ive installed the project, but when the game loads, with no issues i cannot see any custom roads. i can see the theme and have added it to theme mixer, but if i go into road or find it 2.7 there are no custom assets so no roads ext, can anyone help

@Macwelshman Ah. thank you for answering. will love your roads even more if you are able to address it, but if not I still love them.

I've noticed some of my big roads (UKR-LR 6L2W-28 parking) for some reason is allowing U-turns mid road over the central reservation. It looks like its some wierd interaction with nodes (Node Controller Renewal) as they seem to be doing UTurns at these locations only. But not all of them, I've got a very long road and its only one place along that road. If I remove/change the node, they stop but just start doing UTurns elsewhere

@Elistone Because these roads were created before TMPE was available and for them to work with TMPE they need specific settings. I'm looking into addressing this but cannot promise that it will happen.

can I ask why don't the road markings appear when you use TM:PE for the junctions??

Is there a chance we can have some assymetrical roads like 2+3? I like to use turn lanes just before intersections.

@DragonWolf5589 See my comment on the markings pack. All of the road markings are part of the road textures and therefore don't require the markings pack. The pack is for additional markings that cannot be automatically included.

what am i missing? I have all the roads but there's no lines/markings or anything but everything i can see is subscribed?

They're all pretty good assets and actually somewhat fit my Australian themed city, but however, I would like 8 lane roads without the bus lanes, 3+5 lanes, 4+3 lanes. Thank you very much.

@AVC29 @GarethHuball All the roads in these packs are at the same level as the vanilla roads, however, the road markings are added using a 'very' slightly raised section containing the lines. Unfortunately I'm not in a position to change any of the roads and don't think it's likely they will be updated in the future.

@AVC29 - I have the same problem. Wondering if the UK roads are at a different height than the standard roads?

I love these roads! But when using node controller and then trying to mark the roads with the intersection marking tool, the lines don't show up :-(

@Splifsend Thanks for your support but unfortunately I'm very busy atm and additions to the roads aren't possible.

I need these with Tram lines on the outside -
4. 6 lane, 2 way, 23m: Centre Line
5. 6 lane, 2 way, 25m: Centre Chevron
6. 6 lane, 2 way, 26m: Grass Verges
7. 6 lane, 2 way, 26m: Plain Median
8. 6 lane, 2 way, 26m: Tree Lined

I have money I will donate .. please make it happen. there's just no other roads as good as yours. message me and let me know if you can do it. Thanks

Those road packs are amazing! Is there any chance to make these roads with trams rails?

Love these roads is there any chance we can get some large one way roads with zoning and asymmetric roads eg 4 lane +2 etc.

Oh yes, lanes are just to close together... hope you can fix it soon

@PY_SIU Thanks! I'll look into the issue.

Thank ! I love this mod , because HongKong's road are same UK standard.
But I think "3 lane, 15m: Split" have a bugs ,
Vehicles can't run out of three lanes like the pic
https://imgur.com/a/3YJNTFO
Also I hope you can make a 4 line Split, thank you very much !!

how about a plain UKR-LR 8L2W-30? :D
basically what you did already but with regular lanes instead of buslanes?

Absolutley love the mod, but I do have one question. How come the zone allignments don't quite line up? I get it that maybe it is meant to increase building diversity, but it can be a little bit OCD triggering. Once again, I love the mods, and have began using them frequently.

@calisto751 Thanks! I currently have no plans for tram roads but may attempt them in the future. To be honest, I'm looking forward to not not using the road editor and getting back into creating houses and buildings again.

I love all of your work, and the roads you've created are fantastic. Really looking forward to using the motorways when they're released.

One question - do you envisage creating roads with tram lines (like those in Manchester for example)?

This is some great assets! Thank you for all your work on these!

One problem i have found with roundabouts - the street lights at night don't mirror when i use other street light assets for the roundabout. Only if i use your default street light models do they work. Is there a way to fix the light placements? Also noticed when i place a single street light, these seems to be a phantom light spirte in the center of the roundabouts for each street light (like its rendering a dual streetlight). The light sprite for the actual streetlights over the road itself doesnt render, its just dark.

Thank You. All the best. Just one suggestion for you: You could try Bypass Roads for towns that may have too much traffic in them. Good job and good luck. :)

@heather Possibly. They have taken far longer than I anticipated.

Will the Motorways be out this week?

@arthurmm Thanks. I'm working on the motorways now. I've been jointly working on the motorways and the rural roads. I think you're going to love both.

This is so good! I am thinking of starting a new city with your roads, may I know is there a planned release schedule for the motorways? I am getting very excited!

What Tiddles said. It's also possible to use "Move It" to make the angle between slip road and main carriageway too acute for the other side to permit a turn onto it. Although in this case, sensible use of TM:PE to stop people transiting from the fast lane to the slip road is pretty much required anyway!

Unfortunately, I don't think there's any way to avoid this happening without forcing use of one of these mods.

While I realise it's a lot to ask for, I second the idea of a central reservation web (rather than having to place hundreds of props). Are you susceptible to bribes?

Is this compatible with the Network extensions mod?

I find they behave OK if I use the lane connector, like so:
https://i.imgur.com/2nZwMURl.jpg
https://tmpe.viathinksoft.com/wiki/index.php?title=Lane_connector
Not sure if you need certain traffic AI settings enabled for this to work.

Another option might be to include a central reservation as a separate network with no traffic (like Vanilla Medians Net), ideally with some streetlights. This could be placed between separate carriageways using Parallel Road Tool, and the carriageways' own streetlights could be disabled with network skins. That's not ideal when you come to elevated roads, but could probably be used for some nice ground-level motorways.

@Tiddles Thanks for your great comments. I've experimented with TMPE and had no joy stopping vehicles crossing the central reservation. I would love to get 'both directions' working but as yet I've had no success. I'll take your info and see what can be achieved.

Two-way highways can work as long as you use Traffic Manager President Edition to control the available lane movements when you place them in game. I understand if you'd rather make something that works with the vanilla game, but I'd love to have the combined versions available at some point if you've already done some work on them! Separate carriageways are really useful too though, to manage the complex merging and splitting motorways love to do.

I currently use SimoG's highways over a concrete wall extensively, which are bidirectional and require said lane management. They're reminiscent of some urban roads in the UK, like the A316 through Hampton. One thing those could really benefit from is asymmetrical variants, in case you need slip roads to depart at different points, e.g. you may need to transition from a 4+4 to a 4+3 to a 3+3. Not sure how easy it would be to get those to line up straight though!

Anyway, love what you're doing with these, keep up the good work!

@Macwelshman thanks for the response! Shame you couldn't do it one road. But a more UK themed motorway of any sort would be welcomed. Please dont feel the need to rush, i can understand your frustration with the asset creation for this game.

@THAT_WELSH_GAMER Thanks! The motorways are proving to be a pain in the arse. I had hoped to make them both directions in one road but it seems that this is not possible without vehicles crossing the central reservation to get to a slip road on the other side. I have tried everything that has been suggested without success. I therefore have, regretfully, set out to create them as separate carriageways. I still would like to make them different from other options available so I'm experimenting to see what is possible. Sorry it's taking so long but it seems that the developers don't want to make it easy for us asset makers.

Amazing work! How are the motorways coming along?

@Macwelshman Nice one, will be looking forward to the motorways pack when you have finished, all the best in getting it finished :)

@TescoClubCardUK I plan to release the motorways pack and maybe a rural roads pack before adding any further roads. The motorways are turning out to be very time consuming to get everything working. I'm aiming for both directions in one road with slip roads.

@Macwelshman Ah yes, I see you have updated, thanks. Any plans on making tiny two way narrow roads?

This pops up in LSM:
UKR-LR 6L2W-28 Parking E You have Workshop item 1642013076 but it does not contain UKR-LR 6L2W-28 Parking E. Name probably changed by the asset author.

Any idea if that can be why my savegame won't load?