订阅以下载
Self-Propelled

Instructions:

1. Place, on level ground, wheels-down, front (v-shape) facing the intended direction of travel. Give yourself plenty of open space to drive in.

2. Remove steering crossbar between the two front wheels, underneath (not in front of) the steering platform. It's a little hard to get to, but it's doable.

3. Use rope to link the rope ends on the engine together. There should be four linkages total, top and bottom ends connected to their nearest inner end.

4. Place a static block in front of the vehicle, to keep it from driving away without you. A full length timber placed vertically will suffice.

5. Remove the torsion spring arm stopper blocks. You may want to quicksave (shift-F5) first, as this sometimes can have unpredictable results.

6. Remove the timber connecting the locking catch blocks to the engine body. The engine will most likely start at this point, but will not be directly driving the wheels.

7. Engage both locking catch blocks in the engine body. This is difficult with the engine running, but is doable if you point at the levers so that you see them highlighted, then spam F until it manages to activate. The wheels are now being driven by the motor.

8. Fly or climb your way into the drivers seat (v-shape, between the two bars), pick up the static block, and enjoy the ride! Strafe left or right to steer, you may need to move forward while doing so if the vehicle is moving rapidly.