Brick Rigs

Brick Rigs

评价数不足
Cruise Control with Speed Limiter (Speed Hold)
   
奖励
收藏
已收藏
取消收藏
文件大小
发表于
更新日期
2.146 KB
2024 年 10 月 16 日 下午 8:00
2024 年 10 月 16 日 下午 8:11
3 项改动说明 ( 查看 )

订阅以下载
Cruise Control with Speed Limiter (Speed Hold)

在 Yurikaze1942 的 1 个合集中
システム系 / Systems
4 件物品
描述
==日本語/Japanese==
速度を維持するクルーズコントロールです。おまけで速度リミッターが付いています。
一番右上は係数、その下がリミッターが作動する速度、その下がクルーズコントロールが有効になるスイッチです。
クルーズコントロールが有効になると、有効になったときの速度を維持します。
右下の赤いブロックをエンジンにつないでください。


=係数=
クルーズコントロールが有効になった時の速度で速度が維持されない場合、ここの"Constant Value"を1, 0.5, 0.333, 0.25のどれかに変更すると治ります。
その数字にすれば正しい速度で維持されるかは分からないので、全種類試してみてください。

=リミッターが作動する速度=
リミッターが作動する速度です。
この速度以上になるとリミッターが作動し、速度がそれ以上上がらなくなります。
単位はm/sで、km/hに3.6を割るとm/sになります。
リミッターを使わない場合は適当に50,000とかにしておくと大丈夫です。

=クルーズコントロールが有効になるスイッチ=
このスイッチがON(緑,1.0)になるとクルーズコントロールが有効になります。
ここのInputを変更すれば運転席からの入力などで有効/無効にできます。
デフォルトではBecon(Bキー)になっています。


改造・再配布などは自由です。名前表示などのクレジットは任意です。

==English/英語==

This is a cruise control system that maintains vehicle speed, with an additional speed limiter function included.

At the top right is the coefficient setting, below that is the speed limiter activation threshold, and below that is the cruise control activation switch.
When cruise control is enabled, it will maintain the speed at which it was activated.
Connect the red block in the lower right corner to the engine.

=Coefficient Setting=
If the cruise control doesn't maintain the correct speed when activated, try changing the "Constant Value" to either 1, 0.5, 0.333, or 0.25. Since it's not possible to predict which value will work correctly for your setup, please try all options to find the right one.

=Speed Limiter Threshold=
This sets the speed at which the limiter activates.
When the vehicle reaches this speed, the limiter will prevent any further acceleration.
The unit is m/s (meters per second). To convert from km/h to m/s, divide by 3.6.
If you don't want to use the speed limiter, you can set this to a high value like 50,000.

=Cruise Control Activation Switch=
When this switch is ON (green, 1.0), the cruise control becomes active.
You can modify the Input setting to enable/disable the system using various controls from the driver's seat.
By default, it's set to Beacon (B key).


Feel free to modify or redistribute this system. Credit attribution is optional.