Barotrauma 潜渊症

Barotrauma 潜渊症

评价数不足
Corollary I
   
奖励
收藏
已收藏
取消收藏
文件大小
发表于
更新日期
617.555 KB
2024 年 4 月 28 日 下午 12:00
6 月 19 日 上午 11:10
9 项改动说明 ( 查看 )

订阅以下载
Corollary I

描述
前言
T1 打捞运输型潜艇,版本1.1(稳定)。如果你喜欢我的设计,请不吝为我点个赞,非常感谢!侦察型潜艇引理系列已上架
推论I型隶属的推论系列立项于引理系列后,在延续其流体动力学理念的前提下,特化了其打捞作业功能。用于取代各式老旧运输潜艇。全系列拥有以下标准配置
  • Lock: 控制禁闭室上锁
  • Dock: 控制下侧对接舱口
  • Hatch: 手动控制上下侧对接舱气闸
  • 海水过滤装置: 过滤海水,提纯出异星血浆
  • 通水阀模式:额外的压载舱
  • 移动货架:可出入船内外的货架
  • 深渊采矿艇:可高速下潜的采矿艇
定位官船改,在地狱难度+木星辐射下的战役里会获得良好游戏体验。轻量化设计,没有炫酷的装饰,但保证不卡。请在出航前阅读说明书

特化型的特化内容
  • 装甲: 硬化装甲强化,并于电气舱配有内衬装甲
  • 加工设备: 仅配有加工台及分解仪,但效率得到强化
  • 独有系统: 注释级舱外作业自动跟随无人机



推论I型
推论I型是欧罗巴联盟设计局为寒冷冰穴海域打捞开采项目所特别研制的小型运输型潜艇,自带矿物扫描仪,用于取落后臃肿的骆驼级[barotraumagame.com]。系列标志性的菱形纺锥设计,令安装具有超高的燃料经济性的小型引擎变得可能。在牺牲最大航速的情况下,节约下来的电力被分配给了舰上的加工设备,令它们拥有了其它类型潜艇难以企及的效率。

作为推论系列的第二个研制型号。设计局的设计重心着眼于紧凑与模块化,最大化降低建造成本。为了鼓励船长们替换驼峰型运输潜艇,其内嵌式的货舱设计上就是驼峰级“驼峰“货舱的改造版本。各大承建的船厂甚至直接安装的是新鲜切割下来的”驼峰“。有传闻个别船厂甚至允许补差价直接以旧换新。

大量推论II型上被验证可靠的模块,被安装到推论I型上,尤其是猜想级移动货架与前部舱室的布局,几乎是完全一致。故而对应模块的使用说明不在此赘述。为了在保持紧凑的流线型外形下留出猜想级深渊采矿艇的泊位,后压载舱被压缩并改造为下出舱口。仅当通水阀模式开启后,此舱室会变成压载舱,其内的泵得到了一定程度的超频。全船总计提供36箱的货物运输量,货舱同时提供了大量弹药和轨道炮弹的储备空间,完全足以供应同级别攻击型潜艇多轮高烈度战斗所需的弹药消耗。

武备方面,舰首尾配备的并联电磁炮弹药的速射炮是从引理系列上沿用而来的成熟设计,两种弹药会交替射出,而针对不同目标可以自由选择弹药组合。并联弹药的设计大幅度避免了因换弹而导致的火力真空,而合适的弹药组合,能给予其完全合格的自保能力,尤其是在较为安全的寒冷冰穴区域。受限于成本,全船无任何大型炮座,面对更深海域中大型兽群的突然袭击,可能会陷入危险的境地。

其特化型号安装了注释级舱外辅助作业跟随无人机,整体设计理念为牺牲加工全能性下,特化打捞分解的职能。注释级的挂仓位于前压载舱内,其泊位配备有自动停泊系统。最终两者的带补给售价被稳稳压到了6000马克整。部分效率高的船厂甚至还能在此售价下有不错的利润空间。无论是常规的采矿运货或打捞沉船,或是冒险前往深渊,推论I型都能很好的胜任。祝愿每一位推论系列的船长都能装满ta们的货舱,衣锦还乡。
热门讨论 查看全部(2)
3
6 月 19 日 上午 11:09
任何意见或者BUG/Any suggestions or Bugs/Переведите следующее на русский язык:
Rancher_Ma
0
2024 年 4 月 28 日 下午 12:34
置顶: 如何更新潜艇/How to update the submarine
Rancher_Ma
9 条留言
76561198318453851 7 月 24 日 下午 5:59 
船好:steamthumbsup:
Rancher_Ma  [作者] 6 月 1 日 下午 3:24 
Version 1.0
Major updates, details as follows.

Omni+Spec
1) Reworked the Conjecture-class Abyss Landing Craft, fix its mounting position and significantly improving the piloting experience.
2) Updated texture depth and interior decoration of the cabin.
3) Reassigned the external camera previously controlled via the cockpit mirror interface to the surveillance centre.

Spec
1) Rebuilt the Note-class autonomous following drone, now operated via Periscope controls. After disconnection, the drone will remain in hover mode. The auto following system has been significantly upgraded, including automatic disengagement when approaching the submarine too closely.


(All content within the list can be found in the image descriptions. This is the text version for reference)
Rancher_Ma  [作者] 6 月 1 日 下午 3:24 
版本 1.0
重大更新,细节如下。

综合型+特化型
1) 重做了猜想级深渊登陆艇,并修复了其挂载位置,大幅度优化驾驶体验
2) 修改了贴图深度+船舱内饰
3) 讲驾驶舱镜控的舱外摄像头改为监控中心控制

特化型
1) 重做了注释级自动跟随无人机,目前改为镜控操作,离控后会保持悬停。跟随系统大升级,并在里母船过近时自动关闭跟随。

(所有内容,均可在介绍图片中找到,此处为文字版)
Rancher_Ma  [作者] 2024 年 12 月 29 日 下午 10:20 
@Acid, if I understood correctly, you are asking why the note drone can dock automatically on Corollary II but not on Corollary I. This was my oversight, and the issue has been resolved in the latest version.

I used the simplest method: linking a wire from the note drone's submarine dock panel's 'distance sensor' to a delay component. This setup enables the note drone to auto-dock once it is close enough to its docking point on the submarine. The delay component ensures that the auto-dock function activates only after the 'close enough' signal has been sustained for a short period. Without this delay, you might not be able to release the note drone from the submarine. To complete the docking process, you need to turn off its auto-follow mode and use the navigator to guide it toward the docking point. This will ensure it fully auto-docks.
Abra⁧⁧cadabra 2024 年 12 月 28 日 下午 4:48 
How do you make the note drone auto dock?
Rancher_Ma  [作者] 2024 年 11 月 29 日 上午 7:20 
@Kevin, I have checked the engine, and the mechanic will fix it while squatting on the stairs. I then tested it by using a grenade on every part of the submarine and letting the AI handle the repairs. It seems to be working properly. My suggestion is: are there enough diving suits on the submarine in your situation? The bot will refuse to enter regions full of water without a diving suit. Hopefully, this helps. Could you also provide me with more information about this bug, such as photos or videos?:lunar2019piginablanket:
Rancher_Ma  [作者] 2024 年 11 月 24 日 上午 5:48 
@kevin Let me check it, thanks for reporting the bug!
John Dulanius 2024 年 11 月 23 日 下午 8:41 
No AI support? Mechanic is running back and forth on the stairs trying to fix the engine I think :(
Rancher_Ma  [作者] 2024 年 4 月 29 日 下午 1:36 
版本 0.0.1
综合型+特化型
修复上出舱口的自动门在舱室漏水时无法打开的严重bug
如果你使用的是旧版本,可通过断开上出仓口两侧舱门其底部的继电组件的“设置状态”部分的电线来修复此问题

对造成的不便深感抱歉!

Version 0.0.1
Omni+Spec
Fix the serious bug that prevents the automatic door at the upper exit hatch from opening when there is a water leak in the chamber.
If you are using an older version, you can fix this issue by disconnecting the wires of the 'set state' part of the relay component at the bottom of the doors on both sides of the upper exit hatch.

My apologize for any inconvenience caused!