Subscribe to download
CCC 12m Multi-Purpose Landing Craft

This Is a Landing Craft that I built for @Captains Challenge Foxtrot
It is able to carry one Pat Motor 2C5M pickup trucks and some other of my modules (sold separetaly)
It is based of a real life vehicle (A 14.4m Aluminium Multi-Purpose Landinf Craft) Its not a 1:1 build instead I just based my build from it.

Results Video- https://youtu.be/8RqnuhsO1SU?si=frU874_gi1QiU9-t

---

Startup Checklist
-First Open the hatch at the stern of the boat and flip the fuel Pump switch.
-Then go to the drivers seat and turn the key. (the engine should start)
-Lastly use W/S for throttle.(when the throttle is below -0.05 Reverse engages)

Landing Procedure
-Approach throttle is 40-45% Throttle.
-As soon(or a bit before) the Bow toucehes the beach you want to cut power by decreasing throttle. (be sure to not accidentaly engage reverse)
-When beached first Unfold the Ramp then lower the ramp until its intact with the beach.

Special Notes for Captain
-You want to spawn the Pickup so the wheels align with the mag alls (not the front mag alls) its supposed to spawn with the front of the car facing the stern of the boat. (so you have to reverse out)
-When you spawn the vehicle you want to head to the Deck Management hatch and open it up.
-You should now see different panels you want first flip the circuit braker then raise the hook until the light turns on.
-When youre later are going to unload it you need to Firstly Release the hook connector by pressing the "Release Hook" button then Lower the hook.(have the release on during the off load so it dosent connect to the truck)

---

PAT Motor 2C5M Pickup: /psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=3008335778

I built the engine controllers from watching Captains Engine Controller tutorial: https://youtu.be/qLqmzCOaeKY?si=X0H01LGGK_Uz51-8


Thanks And Enjoy!