订阅以下载
PEN-01M MOMOKAPOOL

This is a PEN-01M Momokapool, from Gundam Build Divers.

It is simple deformable.
It is a posed model with almost no utility and all joints movable.
The thrusters have only minimal positioning thrust.
If you want to move it comfortably, add thrusters or change to more powerful ones.
The cockpit is in a 'Petitkapool', and the 'Petitkapool' can be detached and moved alone.

---

Size
Total height 13m 1/1 size
Movement suitability
Space
Airtight/Oxygen
None
Required Resources
Uranium (for power)
Fuel is replenished through a connector on the rear side of the main body
Gimmick
Full body joints movable
Cockpit open/close
Cruise mode (simple)
Petitkapool
Armament
None

---

Ctrl+[1]
[1] Cockpit hatch open/close Petitkapool Also opens with a switch on the top of the head
[2] Head cover open/close Also opens with a switch on the top of the head.
[7] Petitkapool limbs extend/reduce
[8] Petitkapool Separate/Combine
[9] Thrusters stop/activate.

Ctrl+[2].
[1] Pose change (standing pose <-> cruising pose)
[2] Head open/close
[3] Front cover open/close
[4] Shoulder cover open/close (can only be closed by removing the arms)
[9] Detachment of arms (cannot be undone once removed)

The cruising form is a simple cruising form with arms out.
To make it a full cruising configuration, the arms must be removed.
There is no way to attach the arms once removed, so they cannot be returned to standing pose from the full cruising form.

---

Since the cruising form is done by changing the pose, you will not be able to get either the standing pose or the cruising form if you want to change to a different pose.

Pose change with the key operation Ctel+2 [1] will switch between the two poses.
It is not possible to set more than one pose, as it only reverses between the upper and lower limits of all hinges and rotors.
Since [unlock -> change -> lock], the initial state must be locked.
If you want to set the poses yourself, change the setting values of the hinges and rotors and put them in the locked state.
For joints you do not want to move, set the upper and lower limits to the same value.

---

There are Re:Rise versions in white, black and pink body colors.
Black: #171717
White: #FFFFFFFF
Pink: #EB60BF

---

Blocks

Blast Door Sections Retextured
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1574837911
Used for claws

Pistons Mod Pack~(DX-11 Ready)
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=566142426
Used for deformation of sections

Gravity Engine
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=2657098322
Used for movement.