订阅以下载
SPYING CAMERA

!!! Wiremod Used !!!

You need to wait at least 5 seconds for the screens to open.

Descriptions of the buttons on the EGP Screen;

Camera [Enable/Disable]: It performs the function of turning the camera and screen on and off.

Camera Freeze [Enable/Disable]: It performs the function of turning the gimball feature of the camera on and off.

Camera Follow Speed [Slow/Fast/Fastest]: Selects how often the camera should be followed.

For example, if the person you are watching is not very active, you can set it to slow mode, this will allow you to watch without continuous tearing on the screen.

Camera Follow [Enable/Disable]: Turns the camera follow feature on and off.

For example, if there is a point where you are stuck when the person you are watching enters an important place, you can stop following and focus on that point.

Camera Hide [Enable/Disable]: You can use it to hide or unhide the camera.

For example, if you want the person not to realize that he/she is being followed while you are following a person, just activate this function.

Camera FOV [10-120]: Allows you to change the FOV of the camera.

Camera Follow Range [0-1000]: Activates the teleport's jump feature after a certain distance between the camera and the person being followed.

Warning: This feature becomes functional when "Camera Follow:Enable".

For example, if the person you are watching doesn't move much, you can increase the value here so that your camera doesn't teleport around too much and moves according to the distance you set.

Teleporter Position: Allows you to adjust the camera according to the coordinates of the world.

1.Warning: The person you are watching is not in front or behind you, but in world coordinates.

Warning 2: You must turn "Camera Follow Range" to "OFF" for this feature to take effect.

Gimball Position: Allows you to adjust the gimball position of the camera.

For example, if you want to watch from slightly above and slightly to the right of the person you are watching, just increase the Z value and play with the X value.

Free Mode [Enable/Disable]: When the mode is turned on, the camera does not track a specific person and focuses on the GPS at the station, which becomes its starting point. again you can play with the values in Teleporter Position and the Gimbal.

Warning 1: This feature becomes functional when "Camera Follow:Enable".

Warning 2: You need to set "Camera Follow Range" to "OFF" in order to realize that this feature is effective.

For example, if you are in a house and want to watch the outside without going outside, you can turn this feature on and use it.

Call It Here: Teleports the camera to the station.

HIDDEN CAMERA
SPYING CAMERA