订阅以下载
Gydroplane.proj

Hi! There have been no buildings for a long time ;) keep the plane on a brand new shaft system! Made Dixie, thanks to the game developer for fixing the water!
---------
Management:
Button inside the cab-start (need to press)
J-clutch
K-change of gear (need clutch)
W-pitch up
- - - - - - -
Instructions:
To start the engine, you need to insert the " key " and "crank" it
(of course, this is all the action you imagine, but I set up the button exactly so that it looks like a key :) )
Okay, you started in first gear, to change gear, you need to hold the clutch and wait for the indicator on the monitor, when it appears, change gear and ATTENTION, PRESS the clutch again.
To take off you need to:
1. wait until the plane accelerates and begins to " nod " nose down
2. Pitch up, usually the takeoff is long and smooth, so you will have to hold down the W button.
If something did not work out repeat everything from 1 point
My recommendations are: the first gear on takeoff and the second in flight.
-
What can happen in flight:
1. The steering mechanism will be very loose, you will most likely start to dive or you will break off the screw.
2. You will go into a dangerous angle of inclination.
3. You will reach a critical height
-
What to do:
1. Gently press W until it aligns ( it won't work the first time)
2. The automation will work, you will not have to do anything.
3. The automation will work, you will not have to do anything.
-----
p.s.
As I later learned in the aircraft there is no manual transmission, they quote the "Perfect" transmission, well, I was in such a passion that I began to assemble the plane as it is, do not hit the sneakers :3. If you want to modify this aircraft, then God grant you health to understand the logic, and so I allow you to use and modify it, just specify the author.