Mindustry

Mindustry

评价数不足
Bot_P7
   
奖励
收藏
已收藏
取消收藏
标签: schematic
文件大小
发表于
更新日期
12.871 KB
2020 年 12 月 31 日 上午 9:57
2021 年 1 月 3 日 下午 8:49
4 项改动说明 ( 查看 )

订阅以下载
Bot_P7

描述
Requires
1. 6 titanium belt of sand to the top mass driver (If overdrived, 4 belt and if under dome influence 2.4 belt.)
2. 1 titanium belt of thorium in the core
3. Some amount of titanium in the core (only for 24 Mega/Poly combination since Poly cannot mine titanium so it will take from the core instead)
4. The rest of the input resources such as copper/lead/coal are mined directly.

Produces
1. Graphite (~600/min)
2. Silicon (~850/min)
3. Metaglass (~600/min)
4. Plastanium (~300/min)
5. Surge Alloy (~240/min)
6. Phase Fabric (~120/min)
7. Titanium (Depends on mining drones)

Power Draw
Normal: 6582
Boosted: 16455

Make sure to turn the lower switches off before deconstructing. Or else you have to get a processor that use the following code to reset the flags for mega, quasar, poly

ubind @mega ucontrol flag 0 0 0 0 0 ubind @quasar ucontrol flag 0 0 0 0 0 ubind @poly ucontrol flag 0 0 0 0 0

You can build the following close by if possible to take advantage of the overdrive dome effect.
1. Launch pads to launch to a central resource hub
2. Air-blast drills to mine thorium/sand (1 fully powered air-blast drill with water extractor can produce 1 TBL of sand)
3. RTG Generators

There are 2 modes now controlled by the switch directly below the mass driver
1. Mega/Quasar combination (Both units can mine titanium)
2. Mega/Poly combination (Only Mega can mine titanium, Poly will take titanium from the core instead)

The bottom switch below the mass driver will reset flags for all mega, quasar, poly, which is useful if the flags are somehow not binded correctly.
11 条留言
bojianh  [作者] 2021 年 1 月 27 日 下午 5:24 
xMrKamil 2021 年 1 月 11 日 下午 3:06 
you could add its power draw (boosted and standard) to description
bojianh  [作者] 2021 年 1 月 4 日 下午 3:19 
Thanks for the comments. I figured that Mega/Poly is slightly easier to manage with some titanium mines than Mega/Quasar.
cybersol 2021 年 1 月 3 日 下午 10:06 
Finally got around to testing this. It's seriously impressive! I'll have to try it out in the campaign soon.
cybersol 2021 年 1 月 3 日 下午 9:28 
2 Laser and one pnuematic with water also fills a titanium belt, but airblast is definitely easier.
bojianh  [作者] 2021 年 1 月 3 日 下午 4:51 
I recommend switching to airblast drills when possible:
3.42*3.23 = 11/s
bojianh  [作者] 2021 年 1 月 3 日 下午 4:40 
Titanium Belt: 11/s
2 laser drill: 1.92 * 2.56 * 2 = 9.8304/s (Close to a titanium belt)
3 laser drill: 1.92 * 2.56 * 3 = 14.7456/s (Too much)
Darth Porgus 2021 年 1 月 2 日 下午 1:50 
assuming I am not powering them with water or cyrofluid
Darth Porgus 2021 年 1 月 2 日 下午 1:50 
how many laser drills does it take to fill a titanium belt?
bojianh  [作者] 2021 年 1 月 2 日 上午 3:27 
Yeap, that is right. In fact to make things easier, you can use overdrive projector and use only 4 titanium belts of sand under that influence, or even better if you can build this within the influence of the overdrive dome, then it is only 2.4 titanium belts.