订阅以下载
Flying machine 08

Creator : Comrade_Nova

Please subscribe and check my workshop if you like my works!




This is a new flying machine that uses only the default block properties of scrap mechanics. So this machine does not use any suspension glitches, glitch welding, Json file editing, or controller speed boost.
In the future, if a machine using the glitch tool is disabled, this machine will continue to be usable.

The gyro system of this machine is the same as Vanilla Hover / Flyer V3.2 produced by KeinAnderer.




This machine has the same in-flight stability as previous flying machines.
But unfortunately, this machine has a lower attitude than a machine using suspension glitches, so you need to use this machine with the following cautions.

・ Contact with all obstacles should be avoided as much as possible.
・ Before landing, you must start descent after standing still in the air.
・ Landing should be done as slowly as possible.
・ You must get off the seat after landing.



As with previous flying machines, the landing gear works by detecting approach to the ground.


The attitude control system starts operating as soon as the engine is started. With thruster control, it can take off even from sloping ground.


It can be turned left and right by thrusters.


Like the Flying submarine, it can be slid left and right with buttons 4 and 5.




Controls
[W,A,S,D,] ... Move back and forth, turn left and right
[Button 1] ... Start hovering state
[Button 2] ... To rise
[Button 3] ... To descend
[Button 4] ... Slide to left
[Button 5] ... Slide to right
[Button 6] ... Ring a horn