订阅以下载
ISL Small Grid Printer Projection Arm

This is the projector sub grid for the ISL Small Grid Printer Type 2. For the rest of the instructions and information, please follow the link to that page, or check the “required items” section.

When building an ISL Small Grid Printer in survival, The advanced Rotor and projection arm will have to be added manually:

1. Place an Advanced Rotor (large grid) on the piston facing the welders.
   
2. Remove the rotor head and use the “Add small Head” button in the terminal of the rotor.
   
3. Place a small reinforced conveyor on the small grid rotor head.
   
4. Place a projector (facing towards the welders) on top of the conveyor block, so that it is not obstructing the conveyor opening
   
5. Load the Small Grid Printer Projection Arm into the projector, align it with the blocks already placed and weld up all the parts.
   
6. Grind the head off the hinge, so there is space for the one above it to fit.
   
7. Grind down the red block, so that the small connector, conveyor and hinge head fall into place.
   
8. attach the Hinge to the hinge head.