安装 Steam
登录
|
语言
繁體中文（繁体中文）
日本語（日语）
한국어（韩语）
ไทย（泰语）
български（保加利亚语）
Čeština（捷克语）
Dansk（丹麦语）
Deutsch（德语）
English（英语）
Español-España（西班牙语 - 西班牙）
Español - Latinoamérica（西班牙语 - 拉丁美洲）
Ελληνικά（希腊语）
Français（法语）
Italiano（意大利语）
Bahasa Indonesia（印度尼西亚语）
Magyar（匈牙利语）
Nederlands（荷兰语）
Norsk（挪威语）
Polski（波兰语）
Português（葡萄牙语 - 葡萄牙）
Português-Brasil（葡萄牙语 - 巴西）
Română（罗马尼亚语）
Русский（俄语）
Suomi（芬兰语）
Svenska（瑞典语）
Türkçe（土耳其语）
Tiếng Việt（越南语）
Українська（乌克兰语）
报告翻译问题
19 
举报此帖
Halp and thanks.
so I'm using channels 2, 3 and 5 for this.
To keep it simple(ish), the prox sensors on the image are the same channel as their number.
the door at 1 is the outer door, primary channel is 3, secondary channel is 5.
the door at 4 is the inner door, primary channel is 3, secondary channel is unset.
the preset mod below will do most of the setup for you (just apply AirLock Outer to outer door and AirLock Inner to inner from the preset cog)
https://www.dropbox.com/s/5fmavxgkajic5te/PowerLogicAirLockPreset.zip?dl=0
the doors probably wont start on the correct macro actions or start with the wrong wait type, so you might have to draft someone and walk back and forth between the freezer and the exit or toggle wait type.
Basically the doors are channel switching to the other side so when it opens it makes sure it only closes when the other side has been triggered. by not having
The second profile on the outer door makes sure that if someone is in the freezer at the time that the door isn't left wide open.
unfortunately I foresee issues that might occur if multiple colonists enter the freezer, screwing up the macro timings, so might be easier having three auto-doors instead.
---
but as for the fuse, you put them in sequence with the batteries, I prefer grouping my batteries in sequence like in the picture, that way if a short happens on the wrong side of the fuse(s) you're less likely to lose all charged batteries (or if the surge doesn't get stopped by by the first few fuses you only lose some charge). it's also a good idea not to have additional paths going to your batteries, as that bypasses the fuses.
https://i.imgur.com/tHHAGoe.png