Set your priority levels (the lower the whole number. the higher the priority 1-10)

Oprindeligt skrevet af Sewer Rat:

USING VANILLA BLOCKS

example with no quotas:

{Name of block} [TIM {Itemname} : {Priority Level} ]

on your big ship -
Large Cargo Container [TIM SteelPlate:P2 InteriorPlate:P2]

on your small ship -
Large Cargo Container [TIM SteelPlate:P1 InteriorPlate:P1]

example with quotas:

{Name of block} [TIM {Itemname} : {Priority Level} : {Desired Quantity} ]

on your big ship -
Large Cargo Container [TIM SteelPlate:P2:22000 InteriorPlate:P2:11000]

on your small ship -
Large Cargo Container [TIM SteelPlate:P1:15000 InteriorPlate:P1:6000]

Oprindeligt skrevet af Sewer Rat:

USING MODDED BLOCKS (ex. Nanite Control Factory)

example with no quotas:

{Name of block} [TIM {Itemname} : {Priority Level} ]

on your big ship -
Nanite Control Factory [TIM SteelPlate:P2 InteriorPlate:P2]

on your small ship -
Mega Cargo Container [TIM Force:SteelPlate:P1 Force:InteriorPlate:P1]

example with quotas:

{Name of block} [TIM Force: {Itemname} : {Priority Level} : {Desired Quantity} ]

on your big ship -
Nanite Control Factory [TIM SteelPlate:P2:22000 InteriorPlate:P2:11000]

on your small ship -
Mega Cargo Container [TIM Force:SteelPlate:P1:15000 Force:InteriorPlate:P1:6000]

* In all cases when tranfering between grids, make sure that all associated (collectors, connectors, ejectors, ect...) are set to tranfer desired items, or the transfer may not happen.

Hi tried the Priority option with no luck.. what do you men set the connectors??

When you connect two grids through a conveyor system, you usually do this through the ejector block and the collector block, or you can connect the two grids through the connector blocks. Each of the blocks can hold inventory and will not always let the transfer take place. Go into a control panel and set these block to allow the transfer to take place. As well as lock these blocks together with the 'P' key just like you would a landing gear.

* Note: These transfer blocks (the collector, connector, and ejector) blocks have been broken by Keen in the past and have not always worked for me, but Keen always fixes them.
* Also do not forget the power of the 'Force' command, when using the 'TIM' script or the 'TIM with Port' script.
* Lastly you need a programmable block and timer block running TIM on both grids.

Brilliant ill give rhis ago. Thank you

Happy to help.

when you say allow the transfer on the connectors/ejectors do you mean I need to turn on throw out or pull? or do I have to add a sorter and whitelist those items?

I've ran into the same problem.

My mining rig was working fine with the script, the ores were automatically pumped into my station containers and the refinerys. But when i tried to fill my welding ship, most of the components were not moved.
After 2 days and hours of failure, i just had to learn that some components on a small ship, need a large access door to be moved. The medium cargo container got 2 large doors and 2 small. I used the small in my build which was the reason it failed.
After rebuilding my ship, TIM works perfect and my welding ship is refilled within seconds on docking :D