Thank you i have had the same issue and they keep telling me the mod is fine, i have screens of the roof locking in about 2 feet above the roof and being placed

http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=527240112
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=527240074
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=527240012

Look like what your talking about?

I build with wood for my form (a lot cheaper in mats if i have to tear down and rebuild it) and i am having heck with stuff snapping in to replace the wood and the roof is totally out of the question, hate to but i might have to go with metal if there isnt a solution.

yeah this looks like the same problem im having.
can you put a glass sloped ceiling in that spot?

http://images.akamai.steamusercontent.com/ugc/574564421346137899/F50EDF5C1C5FEB85EFABB311A484AC7BC94DDBC7/

The ceilings work as intended if your having issues placing our items update your mod or remove any dirty mods you have on the server. we run only our mod and we have no issues what so ever.

thanks for your reply.

i too only run this one mod and i recently updated. i have no problems placing the sloped glass ceilings if i only use sloped glass ceilings. my issue arises when i try to either place a rwt sloped ceiling next to the sloped wall or placing a sloped glass ceiling in the middle of vanilla sloped ceilings like a skylight. i will try and post pictures of it soon.

http://images.akamai.steamusercontent.com/ugc/387665036821212975/246F450547871A8D4C2DD3CDB10957287050215C/

http://images.akamai.steamusercontent.com/ugc/387665036821212561/0420C178F948303F4AA42A9625E688A4AFC5EF16/

http://images.akamai.steamusercontent.com/ugc/387665036821212009/42BB74CB2F2D5437E1421C92E503A588E4A503E6/

http://images.akamai.steamusercontent.com/ugc/387665036821211752/44196DBC96CD2363CC6B3B55191F3A4FCB93578C/

http://images.akamai.steamusercontent.com/ugc/387665036821211227/73E9220C3B79E0363042CB3AA91A8A80536C1122/

http://images.akamai.steamusercontent.com/ugc/387665036821210972/D8CA122D7024E0F9A73E10F7CB4713D2C0A1D076/

any suggestions on what i can do to get a good snap?

Nope wont do it with the glass or the other, i get the same results with glass as the screenshots show. I dont how anything could be corrupted file wise, we did a complete redo this morning and everything works fine. The slope panels might work with a building that started out with just the panels from the superfab but they will no lock in with a ceiling that has already been built from wood. Every panel trys and will snap in about 2 foot off the roof or wants to snap in at a ♥♥♥♥ eyed angle.

Ok i tried an experiment, i have a slope on my deck i thought i would give it a shot, so i took the slope ceiling off that was there and tried to put one of akus down, and it wouldnt go at all, would do all the jumping around and such all ♥♥♥♥ eyed but it would align up outside of the area i wanted it, i have 2 slanted sections that the slope should mate to but it wouldnt but it would mate to 1 on the outside of the hole, so i dropped the one on the outside of the whole then the next one fell right in. Then i went to destroy the one outside of the construction and when i did they both collasped.

What i am getting at is that it seems that it does not want to snap to anything other then aku's pieces. Now i did get a glass slope to mate up but it would only mate to the slope facing south and when it did it overlaied the existing wooden instead of destroying and replacing it, so i had to manually destroy the wood slope.

引用自 nothingcleverhere：

http://images.akamai.steamusercontent.com/ugc/387665036821212975/246F450547871A8D4C2DD3CDB10957287050215C/

http://images.akamai.steamusercontent.com/ugc/387665036821212561/0420C178F948303F4AA42A9625E688A4AFC5EF16/

http://images.akamai.steamusercontent.com/ugc/387665036821212009/42BB74CB2F2D5437E1421C92E503A588E4A503E6/

http://images.akamai.steamusercontent.com/ugc/387665036821211752/44196DBC96CD2363CC6B3B55191F3A4FCB93578C/

http://images.akamai.steamusercontent.com/ugc/387665036821211227/73E9220C3B79E0363042CB3AA91A8A80536C1122/

http://images.akamai.steamusercontent.com/ugc/387665036821210972/D8CA122D7024E0F9A73E10F7CB4713D2C0A1D076/

any suggestions on what i can do to get a good snap?

Ok odd question but is the part of the roof you are trying to snap it into facing east or west?

what ive found best is building from 2 tiles back from where im trying to place and underneath it to get the best results. But in saying that ive been having the same issues witht the ones in the actual game, something with the snap data isnt working 100% ingame at the moment but i know our tiles work just takes alot of patience when placing,

引用自 iNukeNoobs：

what ive found best is building from 2 tiles back from where im trying to place and underneath it to get the best results. But in saying that ive been having the same issues witht the ones in the actual game, something with the snap data isnt working 100% ingame at the moment but i know our tiles work just takes alot of patience when placing,

Do you think the snap points will be in a better position after the new dev kit?

thanks nuke for your replies and help. and for the mod itself.
ill try what you recommended later.

Since updating to 217.2 we are all having the same issue:

http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=529072885

It was working fine before hand

引用自 ViviD @ RejectGamers：

Since updating to 217.2 we are all having the same issue:

http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=529072885

It was working fine before hand

Exact same problem here, started at approximately the same time. Glass still works fine.

Same Here, glass is working fine, Wood, big gap just like that...